For the longest time my injectors have not been pulsing or spraying fuel.. I know that fuel is going through the rail because I have a AFPR on the return side I pulled the line off and fuel was in the rail I reattached the line and pulled the rail with the injectors still on the rail and had a...

I have a 97 GST with a Non Eprom ECU I tried swapping a Eprom and socketed Ecu in did the plug swap with no success The car would just turn over but not fire so i swapped back in the non eprom ecu and still having the same issue.. so I ran down a to do list of no start condition.Initially...

I recently got my hands on a 95 eprom ecu had some cap work done and resistor work as well.. I have a 97 GST that had a 97 Non Eprom .. Long story short I installed the ECU and did the plug swap and my car wont fire up it just turns over.. I checked the fuel pressure it has good fuel pressure...

Alright I have searched google quite a bit and cannot find a solution to my specific issue(s) Mods: evo3 16g, VRSF FMIC, 1g Bov, 2g Stock non eprom ecu, wally 255, stm fuel pump rewire, fuel lab AFPR, Stock 450cc injectors, I have a 97 GSTEver since I installed the walbro I have had a...

I dunno where to start, I got a 97 GST I pulled the ecu out and was ready to send it out to ECMlink and found I have a Non Eprom Ecu... BOO My biggest question is it safe to swap to black box? I have searched plenty but maybe I am just not understanding the concept of installing a blackbox ecu...

I had a coolant line break while I was driving a while back and did a temporary fix and bypassed the oil cooler.. I have the motor out for other reasons now my question is by, bypassing a coolant line from the oil cooler can that have harmful issues? here is a picture help how its bypassed there...

Where do I Locate the molding both sides on mine are shot out now. I prefer to find them new is there a place that still sells them? thanks

Has anyone ever experienced a leaky oil pan on a 7 bolt? If so any ways of fixing the issue? I was leaking so bad I had to pull the motor... I hammered out the edges to make sure it is flush I bought "mitsu-bond" to seal it to no avail... Before i buy a $245 pan any ideas?

I have a 97 GST with a stock T25.. I noticed about a 3 weeks ago that I was smoking any time I was decelerating or just before i would come to a complete stop. It happend just after I installed the Megan racing catless DP... So I figured the turbo was on its way out so I ordered from GpopShop a...

Alright I recently rebuilt a 97 Gst (7 bolt) and have installed the Oil Pan at least 4 times.. at first it was leaking near the oil pump then, it leaked on the pump (fixed that with OEM mitsubishi pump gasket from STM) now it leaks by the Flywheel.. I am fallowing it to spec I think.. I am using...

I've seen quite a few DSMers on Fort Riley Lately! Lets do a meet up soon! I have a FB page for imports (fort riley Import car club) planning a BBQ meet up and cruise soon!