So guys after at least a good year of slacking my engine is getting torn out. Going to build something to make big power (600+ at the wheels minimum).. Running a 6466 Gen 2 precision with all supporting mods obviously.I have E85 available pretty easily where I live and definitely plan on...
So guys my friend has a 1992 or 1993 Talon TSI AWD. He lost the key because the car has been a project for over a year. I know stupid and kind of funny. Anyways, I was wondering if anyone had a master key, or a large arrangement of keys they would let me borrow so I could find a correct one and...
So out of curiousity is there a way I can remove my windshield wipers and keep it looking clean? So there's not holes there or just spots for the wipers to attach but nothing there. I want to remove my wiper motor to install a catch can there and figure there's no point in having them.This...
Looking for the correct wheel and tire size/offset setup to run without having to roll fenders. This car will see the street most of the time and an occasional drag day. I don't want to run any kind of wheel spacers either unless it's completely necessary. Car has full D2 drag coilovers and will...
I just saw another DSMr on here CrackedDSM I beleive post a thread with a video of his car sounding strange. I think mine has a similar sound but in my case it is sort of odd... Not sure If this should be in the AT thread or elsewhere because it was a crank pulley problem as well.I finally...
So my car just got the translab shift kit, ipt end clutches, Kiggly front clutches, restalled converter, Kiggly flex plate, etc. Now when I go into reverse the car wants to go forward same as neutral... the car also wants to go forward in park! What could this be!? I've checked, and double...
I have a 1g with some strange issues. I need to set my idle to about 1000rpms I believe and am having trouble doing so. Can someone give me a full write up on how to do this correctly? I was super patient with making adjustments and nothing ever changed.. Reading 120 ICS Position drops down to...
Hey everyone,I would like some opinions on wheels including size and offset. I want something good looking, but also well performing not to heavy if possible. I am going to black out my 1g so the pillar pod and racing seats aren't visible and I think some black wheels would look great with...
Where can I buy one of these? I heard someone say summit had them or something buy I can't find them. Do o2 sensors have standard plugs?If I don't do it this was what's the correct way to solder it? I heard quite a few people say this is the wrong way to do it, that's why I'm asking.Please...
Currently I have my PCV valve going straight to my JMF Race manifold. It does have a check valve in the line however because of the common PCV valve failures. The breather on my valve cover then goes to a vented catch can and to nothing else this is the way I got the car after boostin tuned it...
Hey guys I just got a JMF race manifold not sure how to get all of this stuff to line up.. VSRF FMIC I think.First of all my speed denisty bung was in the bottom of my piping before and would hit the trans with the new lower intake manifold, So I will need some new piping here. Plus my elbow...
So guys I am working on getting my new FP Green on my 1g because I want to get it running within the next few days. With my big 16g I always ran it water cooled from the water pipe, however the FP green is much larger and the line doesn't reach around to the front of the turbo quite all the way...
There's 4 bolts that hold the trans mount onto the fender inside by the passenger side front wheel. One of these fell into the fender while I was removing them. Is there a way to get them out? Or if someone could post a link to the bolt and washer it would be very much so appreciated. I like my...
So I have a totally clean 1g DSM. Remove my intake manifold (for a JMF one) and I figured while I was in here I'd install a rear poly mount. However this rear mount is the rustiest thing on my entire car lol.. Any tips for getting the 3 14mm bolts out of it? I got the one that goes straight...
Wired my battery to my trunk, now I have a 2 to 3 power distribution block from knukonceptz. Preciously the car obviously went to the fusible link box with the power terminal for the battery. Just curious where do people relocate these? and how exactly do you rewire them? I have the positive...
I am relocating my battery, I can't find anything to solid to answer this question. Really don't want to drill into the firewall unless I have to. Any way to make more room under the dash without removing it? Can I take out the air box or something while leaving the dash in? Just seems like I...
I need the clips that hold part #7 in. Not sure where to find them. The interior clips that hold all of the back stuff in.https://www.partswebsite.com/stores/partsimages/parts6/6225295.gif
Picked up a new DSM today for my friend. Has some shifting issues but overall got a very good deal on the car. Was told it has a 1993 trans and needs a different shift linkage setup in it. Is this true? I need someone to sell me these linkages too if possible or a place to buy them :) Car goes...
Hey guys pretty basic question, I just wanted to make sure this was a direct swap? Found a very good deal on a trans and need to know asap. I have a 1ga and the trans is from a 93 1gb. Want to make sure it's a direct swap. Automatic obviously.Thanks!
I am hoping to pull some 10 second passes out of this car. No idea if I can go faster or not yet lol. My brand new setup is a FP green, JMF race intake manifold, and the car is being retuned to e85 and has some headwork done as well. Stock 6 bolt block with 55k original miles.I have heard...
So guys I started this car out in 2014. Saved money and worked my ass off to buy it. I was 18 years old and bought the car with a 16g turbo, injectors, wally 255, 850cc injectors, ECM link v3, stock interior, and some other basic go fast parts for the 16g. The car was extremely clean with a...
So I decided I am going to go FP Green with E85 in my DSM. I'm not so sure what fuel pump to use though. I have some PTE 1200cc injectors and I know my Wally 255 is going to be about maxed out. So do I run dual 255s? or a 450 fuel pump? What are the advantages to either or? I will be pushing...
I'm curious what the best size wheels and tires I should get for my 1G DSM. The car is lowered a little bit. I want to get some Enkei rpf1 wheels but I'm wondering do I get 16s or 17s? What width and everything. Also which tire size will look and preform the best with these wheels?
Well I have a FP manifold but need bolts that will fit my turbo. The FP ones have 1.25 threads and I need 1.5 threads. I called FP and they said 2 are Evo short bolts and two are DSM long bolts. What size are these so I can order them in the correct thread...
Alright guys so this may be a question I already know the answer to but I just want to make sure. I'm currently running a 1G Talon TSI with a Wally 255 rewire, Aeromotive FPR, FIC 850cc injectors, DSM Link v3 full, will full supporting mods, built head, and a ported big 16g turbo, followed with...
Okay so I removed my big 16g, FP manifold and several other things to replace my manifold studs with FP ones. I also am going to change the oil feed line from the housing, to the head. I've heard it is better this way. I went to re install the housing bolt 3/8 ordered from STM, and I can't get...
So I am looking at buying a new intake manifold and throttle body for my 1g Talon. I'm just kinda stuck on a few things.. I've been looking into JM Fab intake manifolds as well as Magnus. JM seems like a better bang for the buck considering its quite a bit cheaper unless we're looking at the...
I see lots of different opinions about this one so I decided to just ask about it.I have a 1997 Spyder I am dropping 2 inches. I have stock 17in GSX wheels that I am putting on the car. From what I understand a 215/40-17 is going to be my best bet. Is this tire to low profile to look good, or...
I found a set of wheels for sale. The guy won them at MOD (Mitsubishi Owners Day) at the factory and I need to know if they are real wheels or replicas. Are they worth $250? I don't like the idea of buying low quality stuff so let me know asap. Thanks everyone.
Okay so I can't find a picture of a bare Spyder trunk anywhere. I believe there may be a problem with mine but am completely unaware. Did the inside of the 2g Spyder trunk come with any kind of "undercoating" inside of it to prevent rust? I can't find this info anywhere, I have searched.