Earlier this year, probably 8-9 months ago at this point, I had my master and slave cylinder replaced and when that happened the shop didn't adjust the clutch pedal correctly resulting in the "build up." I got under the dash and adjusted it to the point where it may not have been perfect but it...
I'm currently removing my low rise spoiler to install a turbo spoiler and I've run into a small snag. I bought round 5/16" rubber plugs to fill the holes but I didn't realize some of the holes were square or rectangular as well. Does anyone know where to buy these plugs?
I know this has been beaten to death but I am experiencing some issues adjusting my master cylinder. I am experiencing the 2G pump up in the clutch. I had my clutch replaced last summer and the master and slave cylinders replaced about 2 weeks ago. I went out of town so I didn't get to drive the...
I've been searching for the better part of 30 minutes and I've seen a lot of threads from 2004-2005 about 19 inch rims and from what I've found is them talking about 19x8 or 19x9.5 rims. I am just wondering if 2011 mustang GT Brembo rims would fit with no rubbing on an eclipse with no lowering...
So I recently got a set of seats from a 2002 Celica from the local yard. After looking at the seats and mounting points they are anywhere between .5"-1" off. The brackets look like they're held on by steel rivets. I know nothing about seat mounting and a little bit about fabrication. I am...
So I got a valve cover off a N/A 92 Talon from a local yard with intentions of painting it. I was looking at it on my shelf along with the other parts waiting to be put on my car when it hit me. It doesn't have the thread for the PCV at the top of the valve cover. Is it possible to tap the valve...
I am looking for shifter bushings that go on the interior side of the firewall. I bought the aluminum base and tranny side bushings but my shifter side ones are the sloppiest. The only ones I've found on eBay are the tranny side.
so inside the trunk of my spyder I never noticed the light on the left side. Does anyone know what makes this light come on? Or is it just another thing Mitsu never wired up?
So yesterday while I was at the yard getting Outlander brakes, I also got some parts for my dads 09 Charger. One of the parts I got was a spoiler. I spent most of my day plastidipping it black. Today while it was sitting in the garage waiting to be installed, I was looking at it and I thought...
So I have been thinking about pulling the brakes off of a 2005 Outlander at a local yard. I have been reading up on the "bigger" brake upgrade. I know I will need an adapter for these brakes, but who makes them? Also, the tech article says that "most 16 inch" rims will fit, will the stock...
So I have been looking around for about a couple hours and I've found the part numbers for both the 2ga and 2gb floor mat clips. However while looking at the 2ga I thought "There's gotta be another car that uses something like that." So that is my question. Can you take the floor mat clips out...
A few months ago, I rear ended someone on the passenger side. Headlight was busted fender was replaced all of it. Since then, the high beam indicator on my cluster hasn't worked. I know it's stupid and useless but I'm kinda OCD about that kind of stuff. If anyone has any idea what it could be...
ive been searching for hours and I can't find a clear answer. My passenger side window has a fairly large gap in between the Window and seal. How do I adjust this? I've been messing with the Allen wrench bolts for over an hour and I see no change. What do the Allen bolts change? How do I fix...
Recently I was having shifting problems on my 5 speed.
http://www.dsmtuners.com/threads/transmission-has-no-gears-every-gear-is-neutral.243515/
The first paragraph describes my situation, even the 2nd, 4th, and reverse problem, it did this for about 2-3 weeks. Recently my car started shifting...
My shifter cables are bad and I thought I read somewhere that 1995-1996 shifter cables are a little different than 1997-1999 cables, something with the firewall grommet. If I got 2GA cables would they work in my 2GB?
So I got the car 2 years ago as a gift for my 16th birthday. Did all the maintenance, timing belt, water pump, all fluids changed. I've had a lot of problems with my car: on my 4th alternator, 2nd turbo, 3rd water pump, and 4th shifter bracket. But I love my car so much I keep fixing it and...
A few months ago I bought a solid intake pipe and when I got it my massive 9 inch K&N filter was too long. The previous owner of my car has the 4 inch round adapter plate for the K&N filter. I am looking around to buy a new one but none of my local auto parts stores have any that would fit. I am...
I had my convertible top replaced but they used the OEM headliner. The new tops rear window is lower than the old one so the headliner barely sticks to the window and always falls down. I've put sticky backed Velcro and put fabric glue on it. It's not wanting to hold. Can I sew the Velcro on? Or...
So looking for 18 inch rims and I really like the look of these two (I know they're the same). I know the evo rims will clear brembos but they're hard to find. The enkeis I can find online but I'm not sure about offset. I've googled it and I can't really understand what offset is. I've read a...
So I decided to do with window rattle fix. Went great on the passenger side but in the driver side the white plastic clip that you squeeze together had broken. The previous owner had put a piece of felt in there but only on one side so it's not really holding. I am wondering if there's anywhere...
So my tail lights need bulbs. Since I've had the car the outside bulb had not lit up on either side. As far as I have found and seen it is only for driving lights, not brake lights or blinker. I just wanna know if this info is right and if it is, is there any way I can make the outside bulb...
I got in a little fender bender, smashed my headlight tore up my fender and bumper cover. I got a fender and headlight but the frame behind the headlight is a little bent. Does anyone have any pictures of the area behind the passenger headlight preferably without headlight. Thank
I've been reading around about wrapping things in carbon fiber looking vinyl. I love the idea of wrapping the grey door inserts to look like cf. I want get a cf looking gauge overlay and I have a "carbon fiber" shift boot and knob. I know I could get the dash kit but I don't really wan the ash...
So I've recently read the write ups for the auto dimming mirror conversion and I love the idea, however the mirror used in the write up doesn't have map lights. Since I have a spyder the map lights are the only interior lights available while driving. I am wondering if there are any cars with...
So I know this is another thread about alternators and I know this topic has been beat to hell but I can't find any circumstances like mine. So over a weekend I got red LEDs to put in my interior for gauges and hvac. I installed them and they lit up fine my doors were open for hours with the...
So I have the whole bezel thing out but I can't figure out how to actually get the switches out of the bezel. I am getting red LEDs today and I cant get to the bulbs in these switches. I've seen on some write ups that it says just pop it out with a screwdriver, but I'm scared I'm going to break...
This may seem like a stupid question but what is needed for led tail lights? I just want to replace bulbs not the panels but I know the regular bulb are dual filament. I know next to nothing about LEDs and I'm wondering if the bulbs are a direct plug in and still retain my driving lights and...
So recently I noticed a burning smell coming from my engine when I was driving. I know I have a small oil leak so my brain automatically went to "Oh no, I'm about to overheat my engine", the fact that white smoke was coming from under my hood didn't help. So I got home, popped my hood and...
So I have already tinted my tail lights all the way across. I've been playing with the idea of turning my middle piece into a brake light. What I want to do is paint the middle piece body color then take the eclipse letters off. Then put tint where the letters were so it just looks like a body...
So I have been searching for hours for how to remove all the window/top trim on the outside of my Spyder.So I'll start with the lower window trim on the driver and passenger doors. I've found a write up on how to remove them and all it said was to remove the two screws on either end. I did...
I was wondering if there are any rims that look similar to the evo x bbs rims. I like the way you look but I don't really want to deal with adjusting my speed sensor. I would eventually like to run evo brembo brakes but I don't know what rims fit exactly, I know the specs but don't know specific...
So I was looking on craigslist and I found a car with spoiler.
http://gadsden.craigslist.org/cto/4607959236.html
What spoiler is this, I know it isn't the turbo whale tail spoiler, but it's close. I kinda like how it looks like the high rise and still has the led in the spoiler.
So I've noticed that while accelerating sometimes my oil light flickers in my gauges. I read it could be the pressure sensor plug coming loose so I crawled under to check it and I found this. I think it is the connector for my pressure sensor. I'm not sure if the flickering was caused by it...
So I've recently purchased a spoiler led brake light to go in the low rise wing, the problem is I don't know what the best way to wire it in so that both that light and the trunk brake light work. I've searched all around and can't seem to find anything. If anyone could point me in the right...
I apologize for asking such a stupid question but where could I find the led strip that goes in the low rise spoiler? I have a low rise on my spyder and I think the third light would be different, well I guess fourth brake light. Plus I plan on tinting my tail lights so I'd like to have that...
So I know everything about EDM parts are beat to death. Despite all of this I still have a question about the mirrors. I know they fold (duh) but I've read about them having a power folding mirrors. Not that the movement of the mirrors are power but that you can hit a button and the mirrors will...
Recently I had my turbo replaced by a reputable shop that specializes is mitsubishi (they were completely rebuilding the engine of an evo VII while I was there). I have a narrowband A/F gauge. I know it sucks, it's useless, I need a wideband, blah blah blah, I get it but it was on the car when I...
So I've been wanting to do all red leds in my interior via rodent's plug and play method. I've seen pictures that with the red led in the HVAC, the blue side of the temp control doesn't light up because of the blue tint on the back. Obviously you cant just sand the blue off like with gauges...
I've read about people putting subs under the convertible top in their spyders. I'm assuming that everyone is talking about sealed boxes. I am wondering if there is enough space to put a ported box under the top that doesn't intrude into the trunk. I am hoping to get at least one 10" maybe 2 or...
I have read many write ups on how to recover sun visors, some with mirrors some without, but I have never found one that does it while recovering with homelink. I found this
http://www.dsmtuners.com/threads/you-want-to-see-what-the-inside-of-a-homelink-sun-visor-looks-like.363059/
and it seems...
I've seen threads and posts about painting the grey parts of the console black. I've also seen multiple people suggest wrapping in some material. In all my research I've never seen anyone actually go through with wrapping their pieces. I just think it'd be more durable than paint. I'm just...
I know obviously it is possible. But is it possible without taking them apart? Like just take the seat belts out of the car and throw them in some rit dye. I know the clip and little rubber thing around the rear female part wouldnt dye but those could be painted. Also, were the spyders ever made...
On my car I want to go with an OEM looking black and red theme. I really like the look of the 1999 OZ F1 rims. I understand that I could get them powdercoated black but I can't find all the OZ emblems and everything in red. I was looking around the internet and I found this
I was wondering if...
I already know how to program the homelink system on my sun visor. Recently I have added an external garage to my house and I was wondering, first, how do you program more than one garage opener? Second, can this be done without having to reprogram my homelink to the original garage?
So I've been researching for close to 2 hours for the info I'm looking for. I've read about the Greddy and Injen pipes but I've also read that the ebay pipes are good too because pipes are pipes. Most of the threads I've read about good ebay pipes are a few years old and the listings are...
I am looking at my local Pick your Part and came across this car, I think I see the talon low rise spoiler and possibly the twisty skirts. This place is about 45 minutes away and before I go out there I am looking for confirmation that this thing has the talon parts I want.
I'm thinking about changing my gauge faces soon and I was wondering if I could use a N/T gauge face since I have and Autometer boost gauge and the factory one is now useless. Would there be a wiring problem, lighting problem, or a fitment issue? I know I will have the extra needle from the turbo...
So I know this is going to seem like a stupid question but as the title says, what do the gauges on the 1999 rally edition look like? I know they have white faces but I can't find a clear picture of what they look like. I would also be interested to know what they look like lit up. Just curious...