Make offer510693982six

Make offer510693982six

Hey,I am kinda forced into doing everything I wanted to do the car more sooner then later, neighbors are trying to get my car towed. So I am trying to hurry up and throw in a fuel cell, along with bunch of other stuff in a few days.My question is, if you have done it, how and which one did...

Hey everyone,I finally got my laser back to get her after a somewhat build and reused my H1E. I didn't change anything as far as oil feed or drain and it was fine before. About two days ago I was driving to get some hIDs for the pop ups and my car stopped boosting.After getting to the store...

Hey everyone,So after finishing up my laser I thought I lifted the head and have been going through coolant everyday. Decided to build the head and do a few other things. After taking it apart come to find out the previous owner put a hose in between the heater hoses and used hose clamps to...

95DsManiac submitted a new Showcase Item:1GA plymouth Laser RSTRead more about this showcase item here...

Hey everyone,MARCH 10TH, 2014My name is Anthony B. and I have another build going on for my 95 gst drag car. I missed driving a dsm on the street as a daily so I checked the local classifieds and found a 1990 laser with 83k on it and was fairly cheap. The guy wanted 1600 but I had to...

Hey everyone,For those who have been following and helping me out, its been a long road. I did a few things this morning, installed the parts I took off and got the car to start. It still has the oil coming from the exhaust, but I will be switching the hx40 set up for the gt42 set up soon...

Hey everyone,So this is kind of a update to the other thread, but more to it the reason for separate threads. Anyhow, today I decided to dig into it some more because I sit here at home and watch videos of everyone else racing and I am just sitting here with a car that wont start still...

Hey everyone,Well today I was reading up about the arc2 I have on my car and how it works. I've been trying to get the car to start for some time and have done a bunch of stuff since I got it to start last month. I put on the arc2 with plug and play all purchased new along with 2200cc, 5 gal...

Hey everyone,Some of you know me and know about the 1995 mitsubishi eclipse gsT full out drag car I am currently building. However, I, probably like many others, miss driving the car on the streets. So I found a 1990 plymouth laser fwd with 086457 or something close to that for 1650 on...

Hey everyone,Some of you know me and know about the 1995 mitsubishi eclipse gsT full out drag car I am currently building. However, I, probably like many others, miss driving the car on the streets. So I found a 1990 plymouth laser fwd with 086457 or something close to that for 1650 on...

Hey everyone,Just letting everyone know my car just passed CA star smog with web 546/547 cams. The car idled at about 1100 and the guy told me he didn't even want to do it because he said it's missing lol, it was not missing, it's called idling.Anyhow the car was a 1990 plymouth laser...

Hey all,I searched but not for long, I need a answer or advice fast!!Yesterday when working on my 95 fwd drag gsT I was finishing up on my fuel cell and related items install. I was cutting out my old hard lines and my dumb axx accidentally cut one of the brake lines in half and the...

So, many may know I have been building My car for 7 months now and have ran into many many problems with trying to get it started. Well yesterday I got it to start for a second and today I fixed the fueling issue and found out I needed a jump and spark plugs.Well an hour ago me and my...

Hey guys and gals,My name is Anthony B. and I finally decided to start this build journal. I must say when I first got the car I had no idea what I was doing and didnt really have a plan at all. I just got out of prison 02-06-2012 prior to getting the car and also got married right before...

Hey all,I have posted this in the electrical tech forum and have not gotten any real help so I am looking here to see if I can get some help from you all. I am going to copy and paste my original post and then a copy to the link of the thread in the electrical tech forum.95 GST no power...

Hey all,First and foremost I have been searching and reading for two days and nothing has helped.Over the past four months I have building my gsT for 700hp and since having it stripped down to just the frame I decided to do a wire tuck and delete things etc.... Well two days ago I...

Hey everyone. I hope this is in the right thread this is my first time posting here, so if it is not I am sorry.Well, I have been porting my head for a couple weeks. I've been taking it real slow and making sure not to go to far. The head is off my 95 gsT and I am doing all the port and...

Hey everyone. Well I ordered a BNIB .55 ar bep housing for my H1E and I finally got it two weeks later today. Opened the box and it is really shinny and new like advertised. I had recently purchased one from a member on here for 20 shipped because it had 4 broke bolts. I couldn't get them out so...

Hi, I just got my manley single springs tht I am using in my build. I was going to use the stock retainers wi them for budget issues, but got a little extra now. I'm wondering if I would be able to use the CROWER PN: 87095s-1 chromoly retainers with them. I found a site that has them for 4$ a...

Hey all. I'm having a really hard time to figure this out and make a decision on my ptw and top and bottom ring gaps. I have read about a thousand threads and the posts are everywhere. I would rather ask my own questions and get answers to them. Im running the following:H1e 58mm same as hx40...

Like some of you may already know, my engine took a turn on me couple Wednesdays ago. Come to find out I had no compression in cylinder 2 and 3. Well after finally getting the passenger axle out the way (broke it should i say) I decided to pull the head. I also checked base timing before doing...

Like some of you may already know, my engine took a turn on me couple Wednesdays ago. Come to find out I had no compression in cylinder 2 and 3. Well after finally getting the passenger axle out the way (broke it should i say) I decided to pull the head. I also checked base timing before doing...

On Wednesday I changed the turbo to manifold and exhaust manifold gasket. As well as installed rc1200cc injectors. On the way to the track my car started to act up so I pulled to the side of the freeway. After I turned the car off it wouldn't turn back on unless I pressed the throttle. I started...

Ok, so let me start off by saying this was my first ever trip to the track. I was a nervous mess and I felt like I didn't even know how to drive.First pass: I drive around the box and do a light burnout (BFG r1 in front 18psi). I stage, or so I thought I did lol. I wait and wait, the guy...

Hi, I just received some wiseco 8.5:1 85.5mm 6 bolt pistons and some eagle h beam rods yesterday after waiting a couple weeks for them to get here. I purchased them off a guy on here and was told they are in good condition and drop in ready.Well when I received them two of the rings were...

Hi everyone.Like the title states, I might be taking my first trip to the track ever tomorrow. Every Wednesday they host Wednesday night drags at the infamous infinion raceway in sears point. Racing season has been open up here, but I just keep adding to the car because I really don't want to...

Hey all.It seems like the only time I post on here is when I have something going wrong which is all the time for me.So, on to the problem at hand. I and a couple friends did a clutch job which took 4 6 hour days. when I did the clutch job I got a used exedy 3 puck clutch kit with I...

Hey all. So, let me start by saying I searched for hours and couldn't find any info on my "problem".Three days ago I started a clutch job with some friends. We always start around 6 pm and call it a night around 10pm. The first night we got the transmission out and got the old clutch, pp...

Hey. Well today I was driving and my ic pipe blew off and I stopped to put it back on and I noticed oil on top of my valve cover and upper Intercooler pipes coupler. At first I thought I found it because I had a breather filter on my valve cover and I thought it might be full so I went to pull...

Hey all. Before the bashing starts let me state that I have been reding and searching for 2 hours and haven't found anything close to what is happening to me.Well yesterday I got my hafe manifold in the mail and got my throttle body elbow back from getting meth bung welded on. I install the...

Hi, first off let me tell a little of my story so you can understand my questions more.I just put about 12-15 grand into my car in last few months and two and a half weeks ago I took my car to the shop (ZiggyBuilt performance) to get my cams installed, dump tube made, SD bundle bungs welded...

Hi, like the title says I am in need of some help/advice on some tuning. I just got somewhat done with my build. I still got things to install like meth kit, and some suspension stuff, but I'm taking a break on parts and trying to get the car going. Tomorrow I am picking it from the shop after...

Hi, like the title mentions, I am stuck between the two. I searched and for what I'm looking for I couldn't find. So here it goes.As of now I have a genuine mhi 20g that I just purchased from someone on here and that was rebuilt by jus in sep. the turbo has low miles and I only put 16 on it...

Ive searched and found nothing related to my questions.About three months ago I got a CEL for tps. I didn't change it because i ahrdly drive the car. Well recently I put a lot of money and time into my car withing the last month or so and am a big beginner when it comes to tuning. On link it...

I have searched and there is no thread like the one i am going to create ike the problem I have.So, here is the problem. I just put a lot of time money and hard work into my current and dd 95 gs-t. Most big mods in my profile are the ones i just did within in the last month or two. I finally...

hey, i have a unknown plug/wire that i found that isn't plugged in that i need help out with. It doesn't look like any other plug/wire under the hood. It doesn't have a fennel or male fitting. It is located under the right side or driver side right under the intake manifold. It kind of looks...

ok i know there is a million and one threads but i don't have the time to search right now i am in need of good advice. This is my first dsm and put about ten grand into it within a couple months all mods are in profile and were done proper. I just finished up my some what build I went and got a...

Hi, I am currently doing a build and I just got the rest of the stuff I needed to star putting stuff back together. I went to put the turbo on and the darn ting is hitting the water pipe. I dented it as much as I could and it still isn't fitting at all. Can anyone help me out with this. I have...

Hey everyone. I know that Fmic installs is your own way to do it., but I need help installing mine. Anyone with this Fmic can you please help me out and show me how you mounted it? Pictures would be awesome. So far the only thing I did was cut out some of the bumper so it could fit, but I just...

Hi everyone I am fairly new to tuning. I just got dsmlink v3 lite. Was this a good investment?Lucky for me I had an EPROM ecu and just had to get it socketed for the chip. All that is done and I'm having trouble with installing the wires that came with the kit. The clutch wires I believe. I...

Hi everyone, I am fairly new to tuning and I need help with installing my aem uego wideband kit. I know how to do the power and ground and already got my downpipe at the shop getting bunged for the o2 sensor. I just need help with the white and brown wires I believe. The manual says its lambda +...

Hey everyone. I am new to the site and would like to say thanks for welcoming me in and for all the helpful tips and advice ahead of time. On to the matter at hand.As of now I have a greddy Fmic. I am selling a super 20g and got a offer for a Fmic, real greddy BOV, Megan downpipe, and...