according to the previous owner I have a act 2600 clutch assuming with a act PP. This is BS! $#$#@ ACt!!! Could I have broken PP fingers flying around in there? Also now when I go in reserse, my tire locks up. what kind of clutch kit should I get now?! god #$##$# DAMN IT!
While Driving in 2nd gear I hear a noise coming from the passenger front side. It sounds like sticking a pencil in a fan. It only does it in 2nd gear while driving. As soon as I press the clutch in for 3rd it stops. It doesn't do it in neutral while sitting in second. Could this be a long over...
What is NLTS ? If you mean clutch wire disabled I have the clutch satfey switch unplugged so I can start the car without clutch being pushed in. my fuel psi reads 40. but I have a 6bolt in a 2g. shouldnt it be set at 43.5 I think it is? please help me
I have DSMlink and my motor cuts out at 6krpms. almost like there is a rpm limiter i have it set to 9k in dsm link. could this be from lack of fuel psi?
92 motor in a 95 body with 1450cc Injectors. My PSI on my fuel reads 40. 1g fuel psi should be 37.5 I think and 2g 43psi* My fuel psi reads 40. Should I raise pressure?
Hi I have a 95 sixbolt swap tsi mods in profile. My motor doesnt want to go past 6k. Its almost like there is a rpm limiter at 6k. In DSM link i have it set to 9k. I have hks cams. please help me, this car is pointless with a redline at 6k. The CAS was just replaced.... out of time?
I will let you know how it goes, Thank god I met some DSM professional at a shop when I got a flat. He is on his way. Actually he knew right away it needed to be rewired, and thats why it had a funny idle. So with a Christmas miracle I will have my baby back please god
Hi, every car I previously had in the past I have always seafoamed threw a vac line about a qt of the can. I previous done this in a 1g talon non turbo. I now have a sixboltswap 2g with a 20g turbo. Would this be a horrible idea to seafoam threw a vac line with all these mods? I have never...
Hey guys, I just wanna say thanks again. I'm having a DSM nut come over tommorrow. And thanks for the warning about retiming motor if the cas comes off <3The only thing im worried about is the nasty looking glue.If it gets wired incorrectly, is it possible for some serious damage?
cam angle senor is that the same as the camshaft position sensor? and why is it taped and glued? Car wont start, and DSMlink states camshaft pos. sensor malfunction. Do you think this is a wiring issue or do you think the whole sensor gave way?
oh boy that whole piece? I thought I was looking for an adapter or something . As you can see they hard wired it. I dont believe there is a plug connector am i correct or am i just out of it right nowthanks rickyou no what hang on im gonna go take a close pic of this and get to the...
aw damn, you guys rock. I actually just got in touch with the previous owner. it said its a 6bolt motor, and i need a 92 cam pos sensor. i pray its at the thermo house. and actually you know what, mrVR4 my wires looks REALLY bad in that area. I pray its the sensor. thank you guys so muchyou...
Hey guys my bad I cant seem to find this answer and I need a big break from you guys, trust me i need it. Anyways car has been idling rough, finally gave way and wouldnt start. I checked my dsm link and it says camshaft sensor malfunction. I have a 6 bolt swap in a 2g body (previous owner) Can...
thanks..... real quick i forgot to add my fuel pressure is 39psi. i heard i need at least 45 psi. is there any truth to this, and could this by my issue
Hello, I have a 95 tsi 6BoltSwap. I have a ton of mods done to this car, well actually the previous owner did them and I am a noob. You gotta start somewhere right? Anyways the car has a Hard Idle. If fact, the more juice that runs in the system example Headlights Heater the car idles worse. The...
they claimed the cylinders held their pressure, and I haven't seen and drops of liquid on the ground, and the reservoir is filled. Its actually past max...someone said that can cause problems but yeah. as far as adjust pedal height, do u have any experience of tips for that?BTW I also tested...
p.s. master cylinder WAS NOT replaced at the shop when the slave was.really? thats what I thought and sorry i posted the previous post before I saw your response. any other theories? Can you technically drive with a bad PP?
hey guys thanks for looking anyways Ok I was driving one day and I couldn't shift anymore. I pulled over opened the master cylinder reservoir and it was empty. So i took it to a shop and sure enough the slave cylinder was shot, ACCORDING to my mechanics who I thought I could trust. Non-the-less...
thanks guys!!! yeah the talon runs like a dream. yes your right driver sound ball joint is going ;) Hey so about my so called term underboosting, same im going up a hill and im in third and i give it gas and the car really doesnt move but the car is boosting, thats a no-no right? This car is...
Hello guys, I have always dreamed of getting a DSM, now my dream is real. I trade a 96 NPI mustang gt for it. Im trying to see whats it worth, and If i completely stole this car from this guy and I have no idea what im getting into.
Here is the list of mods -Engine-
4g63
ported MHI 20g
1450cc...
Hello guys, I have always dreamed of getting a DSM, now my dream is real. I trade a 96 NPI mustang gt for it. Im trying to see whats it worth, and If i completely stole this car from this guy and I have no idea what im getting into.
Here is the list of mods -Engine-
4g63
ported MHI 20g...