The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support STM Tuned

Search results for query: *

  1. ***** NEW PRODUCT ***** 2G DSM Drip rail replacement molding DIY kit* (Active)

    Question by 'Shooty' on classified ad '***** NEW PRODUCT ***** 2G DSM Drip rail replacement molding DIY kit* (Active)'

    I'm so happy seeing such a product develop right now 🥹
  2. Shooty

    3D Printed Car Parts

    I've looked into that before and it looks not too bad to achieve. However I believe due to it's size it would be a two pieces which is the deal breaker in my opinion
  3. Shooty

    3D Printed Car Parts

    I've played around today and tried copying the top door vent for 2G's. I printed a rough idea of how they would look like and they turned out great! Some minor modifications must be done for a better fit
  4. Shooty

    Evo 1 project runs rough

    Hi everyoneMy friend bought an Evo 1 a long time ago and decided to make it run lately. The car probably spend most of it's last years in a barn so it's going to be a long run to make it beautiful again!The car is completely stock except for the fuel pump. The reason is simple, rust had...
  5. Shooty

    ECMlink Unstoppable Knock... need help

    So here I am today, now on speed density, trying to go forward with the car It's been better, now idling like it should and getting the car moving fasterBefore continuing with ecmlink and wot tuning, I'vs linked 2 logs to show my concern I'm now at 20psi, creeping up to 23 with equal or lower...
  6. Shooty

    ECMlink (RESOLVED) ECMLink - No CombinedFT, AirflowPerRev, and Always Closed Loop

    You should verify with a multimeter that the coils in the isc are still good and the pluger of it is still working like it should If it's correct, you may be suspecting a bad vacuum leak, can be found using a boost leak testerGood luck!
  7. Shooty

    ECMlink (RESOLVED) ECMLink - No CombinedFT, AirflowPerRev, and Always Closed Loop

    Yes, I would definitly look into the MAF and it's wiring In addition, here is some info found from the wiki, The following must be true for a full 5 secondes so the ECU can go into closed loop operationThrottle position too high (varies by RPM) Airflow too low (units are tricky, but it's very...
  8. Shooty

    ECMlink Unstoppable Knock... need help

    I already went from .28 to .24
  9. Shooty

    2G Subsitute for MR258670?

    If keeping the stock sidemount is your goal, maybe a hard piping kit from ebay by exemple would be a quick option besides junkyards?
  10. Shooty

    ECMlink Unstoppable Knock... need help

    From the boost gauge it goes to 18 maybe 19. It's actually not so off from the map sensorI use the coolant offset only to trigger the fans earlier, it does not change the value seen in the log Without the offset, fans only starts around 220 or so
  11. Shooty

    ECMlink Unstoppable Knock... need help

    So I'm back from the dead!I did two differents small wot, the first one shows an initial setup with FIc 1220cc injectors at around 17-18psi. It shows knock around 5k and higherThe second, same setup, same psi but with less timing in the knock area and a better AFR, still it still shows the...
  12. Shooty

    2G 1999 front and rear bumper on a 1997?

    Sure they will, those are 2GB 95-96 are the pre-facelift design
  13. Shooty

    2G 1999 front and rear bumper on a 1997?

    Rear bumper is not a problemFront will also fit but it must have matching 97-99 eclipse headlights
  14. Shooty

    ECMlink Another Idle problem...

    Well, where to start...I think I red every post containing idle problems and now I'm out of idea, againI started with the basics, did a boost leak test. Fixed the leaks and now it holds 25 psi I've adjusted the TPS within specifications, loosen the throttle cable, adjusted the throttle...
  15. Shooty

    ECMlink Unstoppable Knock... need help

    I though about it :O Lifters sounds silent to me, I've looked for something loose, tighten what I tought it would cause a problem, retorque the knock sensor, I don't what I could be missingHere is the first run of 2018 20 psi (can't do better with the boost creep of the 20g)The second log...
  16. Shooty

    ECMlink Unstoppable Knock... need help

    Summer season finally arrived, snow finally melted and I finally drove the car last month.I've decided to breakin the engine just to be sure 1k miles before taking it for a spinBefore that, I fixed boost leaks, idle and cruise tuned itAfter first pull from 3k rpm annddd ... knock again...
  17. Shooty

    Methanol Injection & Catalytic Converter

    Hello all,As the title says, I'll be running for the first time this summer with a methanol injection setup After some research, I did not find a definitive answer of the utilisation of methanol injection with the usage of a catalytic converter.I'll be using methyl hydrate with water as mix...
  18. Shooty

    ECMlink Unstoppable Knock... need help

    I felt like dropping an update after all this time :)I finished rebuilding the engine before storage, I also used oversized oem style pistons The crank and rods were reused, balacer shafts deleted, new timing beltI could not even drive it and went dirrectly into storage for the winter...
  19. Shooty

    Bought a used FP manifold...

    These cuts should helps prevent cracking, but like you said I don't know if it's worth the time spent on it. Even though I'm feeling confident as is after all
  20. Shooty

    Bought a used FP manifold...

    Thank you for your answers, it had me wondering since I had it in my hands. I'll bolt it to the car and hopes for the best! Thanks again
  21. Shooty

    Bought a used FP manifold...

    As the title says, I bought a used fp manifold and to my surprise when I received it, it had some cutting done to it to clear the bolts and washer I suppose. I've linked some picturesI was wondering if it the cuts were too deep that would cause some cracking over time or else... The runners...
  22. Shooty

    ECMlink Unstoppable Knock... need help

    Endplay was about 0.006"
  23. Shooty

    ECMlink Unstoppable Knock... need help

    Here's the situation right nowBeing not able to find the source of the problem whatever the actions I took allong with peoples who knew more than myself, I've decided to open the engine after a quiet but prononced knock from the base of the motor was constantly appearing after the the car was...
  24. Shooty

    EVOscan Randomly goes lean

    Maybe you could upload it to youtube? Once the car is warm up, can you see the o2 voltage with the evoscan cycling up and down like it's supposed to? It's a good start to see if it's working or plugged in correctly
  25. Shooty

    ECMlink DSMLink v2.5

    I think I might have the software on the original CD if you can't find it
  26. Shooty

    ECMlink Unstoppable Knock... need help

    I have trust issues with the sensor, it's the way there's no knock then it spikes really high. I have another log for the infoI run at 10:1 actually, I left it there but it's not enough, when knocks appear the afr drops even lower in the 9Yes, I have changed the knock sensor since the...
  27. Shooty

    ECMlink Unstoppable Knock... need help

    That's what I tought first and flush my system, refill at two other stations without changing the results. 91 is currently the highest rating avalaible here. I could get 94 but the closest station is around 330 miles away :|
  28. Shooty

    ECMlink Unstoppable Knock... need help

    Yes I do, a 3" GM maf with a translatorSince I don't run speed density, isn't the maf compensation w/SD operation unused?
  29. Shooty

    ECMlink Unstoppable Knock... need help

    So today I tried to perfectionate the tune, Mafcomp has now a smoother line, whitch didn't help I raised afr from 11:1 to 10:1 This kind of helped, the car now runs at a higher rpm before knocking, again by a good amountI must say, I'm out of ideasHere's another log
  30. Shooty

    ECMlink Unstoppable Knock... need help

    I already have a up to date profile, feel free to check it out The car has a complete 3 inch exhaust, with or without cat, the results are the same. I've also tried a 10 psi spring, the results were not so good, even worst The turbo creeps close to 15psi and then knock sudently occur, over 10...
  31. Shooty

    ECMlink Unstoppable Knock... need help

    The housing is the dump version from ebay, wich I cut to weld the vband for the tialIt is an authentic version, no doubt :thumb:It's exactly what I did today. I remove the turbo again, ported the wastegate hole some more and I also removed some meterial so the exhaust flow would go easier...
  32. Shooty

    ECMlink Unstoppable Knock... need help

    So a long time have passed since I'vs updated thisI have menage to fix the coolant issues, it's now staying around 200F at it's maximum The leakdown showed nothing critical The next thing I fixed was a cracked turbine housing. I replaced it with a used one which i cut the flapper on it, welded...
  33. Shooty

    ECMlink Unstoppable Knock... need help

    Coolant sensor was changed last year, it's still reading correctly according to ecmlink I have not forgot your advice of doing a leakdown test, however no car parts stores have the tester in stock. It can be order tought, one week delay at a fair price of 90$ WTFThe cap was changed along with...
  34. Shooty

    ECMlink Unstoppable Knock... need help

    I always see 200 degrees and more even when cruising... This is with a 154°F thermostat and a two row radiator.
  35. Shooty

    ECMlink Unstoppable Knock... need help

    So I've lowered the timing considerably but nothing changed, even at stock boost. I tried methanol injection and still see knock. I will look into buying a leakdown tester next
  36. Shooty

    ECMlink Unstoppable Knock... need help

    Unfortunately, 91 is the highest octane rating I can get, I've decided to go with methanol injection but I cannot get the car to work properly first. I will run a datalog with a good amount of timing pulled and see what it says. My coolant level inside the system and in the reservoir have not...
  37. Shooty

    ECMlink Unstoppable Knock... need help

    A leakdown test will be on my To-Do list, for now I don't have the right quipment to do itI did some more pulls, today: 13psi, I can see about 4 to 6 of knockRet 15-17 psi, I saw around 3.5 20psi, saw 3 againAll of these test were done on an untouched stock timing table Can something...
  38. Shooty

    ECMlink Unstoppable Knock... need help

    Since I've upgraded ecmlink from v2 to v3, I am not able to stop the knock. Was running perfectly last summer at 20psi on 91 octane This year, the car knocks at stock boost pressure1). Any boost, vac, or exhaust leaks? Boost leak tested 5psi above your max boost with no leaks? No problem there...
  39. Shooty

    2G Knock?

    So today I've tried water/methanol injection (50%water/50% methyl hydrate) I was able to raise the boost to 20psi and saw at maximum of 2.5deg of knock (The same boost level I was last summer on straight 91 octane without problems)Compared to last year's tune, only the AFR was really different...
  40. Shooty

    2G Knock?

    Here they are, BPR7ES at .028
  41. Shooty

    2G Knock?

    So my car decided to be mean with me this year, it decided to knock all the timeI used to run last summer at 20psi on highest octane available... being 91. No knock was visible trough ECMlink. No timing advance was addedThis year I switched to V3, did the tune with a wideband and saw some...
  42. Shooty

    MGP GSX

    Shooty updated MGP GSXView updates to this DSM profile...
  43. Shooty

    How to properly mount your 2g Rear Diff

    Definitely on my wish list
  44. Shooty

    MGP GSX

    Shooty updated MGP GSXView updates to this DSM profile...
  45. Shooty

    MGP GSX

    Shooty updated MGP GSXView updates to this DSM profile...
  46. Shooty

    2G ECU Eprom Socket

    So I souldn't be worried about it, it always worked like it should anywayThank you for your time!!
  47. Shooty

    2G ECU Eprom Socket

    I've been running DSMlink v2.5 for a long time and I've decided to finally upgrade to v3 I've pulled the ecu out of the car, opened it to see it's conditionThe ecu looks like to be in good condition to me but looks weird where the the eprom socket has been welded on by the previous owner Some...
  48. Shooty

    MGP GSX

    Shooty updated MGP GSXView updates to this DSM profile...
  49. Shooty

    MGP GSX

    Shooty updated MGP GSXView updates to this DSM profile...
  50. Shooty

    MGP GSX

    Shooty updated MGP GSXView updates to this DSM profile...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top