Ok guys I'm over heating.
List of new parts and car.Car reads 260 on link.7 bolt 2G , less than 30 miles on NEW MOTOR car.rebuilt head.
Rebuilt block
New oem thermostat
Coolant/water for the moment in radiator
AC DELETED
HEATERCORE DELETED
BALANCESHAFT DELETED
timing is dead on
Brand new...
There is a decent amount of us here in San Diego.The thing is we all have our own little groups of friends that we hang out with.Roughly there is about 20-50 of us here in San Diego. Last time we had a meet/cruise was about 1-3 years ago and about 16 cars cruised or so.People have moved or...
Ok guys I'll update this for future searchers.I went to the yard found a 97 turbo car no body damage or air bags deployed. Took the SRS ECU and I installed it on my car.SRS light is gone. Bump and thank you for making this post.Replace the SRS ecu and light should be gone.Top is new SRS...
I did my 2GA Talon converted to 2GB Talon including the fogs. Had the template for the slashes and added the slashes all around.Before I sold that car. I parted out the conversion due to so many low balls. Sold the conversion 300 or 400$ IDR.I loved the big talon wing ** found the hatch at...
So after removing both brackets yesterday to see how close stock brackets would be to bolt onto the NXT seats. I am gonna use the OEM brackets from SXT seats and get those welded and extend them so they could bolt onto the the DSM base in the car.I'll get pics when I do it.
Yeah. I'm here at the moment. I put the "Dodge Neon SXT" in for a fitment. It's almost a bolt on, but the front brackets are off by a bit. Gonna need to cut and weld to make it fit.
Solid!!! I just found some Mint SRT4 seats at the yard. If they're as you say swap the rail and bolt on. I'll also post pics of the results.Stayed posted guys. :dsm:
BumpPage keeps growing. Got people from Up North SoCal down from San Diego DSM.Meets going down up north a lot lately. Soon an event should be planned for SoCal DSM.
Keep us posted Derrick, our rides are getting cleaner and meaner since last time we had that cruise. I'll def spread the word this time, get more DSM's rolling together.
No lights or power come on at all. Car doesn't crank or turn when key is inserted. No lights come on when the door is open. No sounds at all come from the car. It's like a shell lol...It happened about a month ago, but a few days ago after it started raining last month or so.I also changed...
Ok so my buddy has a 95 Eclipse GSX. It doesn't have power to anything. We have check volts at the battery and its 12.4v. We also checked all fuses with a multimeter to make sure they were good. All fuses checked good under hood and in car. We cleaned the battery terminals. We are lost...
Welcome to the DSM club Zack. If you want some help or opinion from other members hit us up on SoCal DSMhttps://www.facebook.com/groups/471447102891361/
ArticleHey guys, I am going to show you how you can start your manual transmission car without putting your foot in the clutch. Meaning as soon as your insert your key to ON your car will start.The main reason to disable the start switch is to save your thrust bearing and help prevent...
Check your Shifter cables and see if the bushing is still in the shifter. Also make sure that your bolt is in the shifter holding down when you shift.I lost my 2/4/R 2 weeks ago because of a shifter clip and bolt.
Just read/watched those video. This Tread was really interesting. Josh kept talking about this car, so I decided to finally look it up. Very nice car and sad that car was destroyed, but it was put to good use!Clean car and I love the blue.
Got my new POD in the mail today and installed it.Sal found a leak in the boost gauge set up and fixed it.Found out my http://members.shaw.ca/dsm.1000q/Engineprimer/2G/mdp.htm needs to be replaced. Found a CEL thanks to Sal!Removed the Strut bars off my RS and then I spiraled the...
Changed the oil and fixed the coolant leak, 2 hoses broke. Swapped new ones on and added new clamps. Called it a day for the engine so far.Also got the boost gauge installed.Removed my crappy rear blurry tint.
Put on the Exhaust gasket and got hit in the eye with a hammer and hit with a heavy metal breaker bar in the mouth/teeth area... Thanks Sal!!!Sal and Mike helped me get the boost gauge on yesterday to find out I have a worse vac leak than expected!!Put my Pod on this morning, broke a drill...
Omg it's you! Lol! My bro Mike loves you, and he always watches your videos :P today we were watching how you put a tranny in. We were having a bit of trouble putting on his 1g awd tranny.Anyways, thank you for the information and advice. Tomorrow I shall do a compression check and the...
I fixed my E-Brake on the TSi this morning after I woke up. Removed the console to find out I didn't need to... The E-Brake was really loose and I tightened the Cable stud nut thing. E-Brake is now tight and stops the car as it moves.