the mishimoto catch can i got was free just a little FYI my buddys dsm that i have at my house is being baby sat by my while he is over seas, we are military, he buys me parts occasionally for being a good friend. he bought us both catch cans so im not complaining about free. It was only 100 and...
Well im not new to the DSM scene, but the one thing im new to is catch can info. I see tons of people using them and i see tons of people not. So i bought a mishimoto sealed catch can and i installed it. 1 hose running from the Turbo intake pipe to the catch can, the other hose from the breather...
When porting the waste gate hole do the light test. Go in a completely dark room and take a flashlight and try to shine light through it while waste gate flapper is closed. If you see no light then your good.
it is very strange, yes fuel pressure is still 43.5 without the vacuum line on my aeromotive. i still havent had another change to hit the highway, i might tonight going to the car meet. Im gonna log it if i can go. But i may have caught the culprit. I have been switching back and forth between...
When the AEM wide band reads --- its just like when you let off. When crusing and it hits --- its only for like a split second. I know its the right pin cause its set up exacly how my buddys car is. Unfortunately he cant help me right now cause he is deployed. I know the WB gauge is good because...
Hey guys, im kinda stumped. I went to take my buddy to the Airport today and while cruising at about 75-80 mph i noticed my wideband reading very lean. 16-17 and sometimes reads nothing (---) AEM WB. This is the first highway cruise i have done since i did switched over to Narrowband Simulation...
i replaced my master cylinder when we did the clutch cause i noticed the rubber grommet was wet. I have seen that jacks transmission video, thats good stuff im gonna rewatch it tomorrow during the day and do everything according to that video. The "parts store" master cylinder i have in now is...
No no extended slave rod.as for drivability it drives just fine, my synchros are going out in second but i know that isnt causing this issue. it grinded it second before my old throwout bearing tore everything up, causing me to replace to this new clutch and now its all weird. Engagement is...
Hey guys bare with me on this, I have searched and searched but didnt quite find an answer, so here is the situation in the best description possible. I had a ACT unsprung go bad, So i replaced it with a ACT 6 puck sprung clutch, ACT pressure plate and a fidanza FW with a Mitsu OEM TOB. after...
idk if this is too old for someone to respond or not but i flashed my ecu with just the launch controll and i have all the bits on,but i noticed in this picture that the launch controll AFR is set to 0 is that going to make a big difference cause i have a 1 in that section meaning its enabled...
sell that safc and save for dsmlink or go with ecuflash. Link is way easier but like said above more expensive. Im running ecuflash and logging everything with Evoscan. Ecuflash is kinda difficult but very doable. For now recirc that bov like the mod said.
im right there with you, wow i used to get notifications on my phone when people would respond to this thread. It quit notifying me obviously! lolwhats up people! if any new people have came to the area pm me! we have tons of dsms here that meet up on the weekends! lets get some more!!!!:dsm:
Those mounts are actually pretty good me and all my dsm buddies have them, the bigger ones go on drivers side and transmission side. Small ones are for the front and rear, the oem black rubber needs to be completely removed to put the red inserts in. Throw all 4 mounts in a fire, I'm not joking...
I got ahold of a 99 gst black box ecu, we put it in my 98 gst, the car started and ran fine. We then attempted to hack it with tactrix cable and EVOSCAN to adjust it for my injectors and do a good mild tune on my set up so i can rid of my safc2. We have the correct definition but we think we...
mannnnn i was born and raised in Hanover, Pa! if i still lived there i would help you in a heartbeat. Miss hanover, grew up right on york street across from the family dollar lol! I go back up there every once and a while. Im military and i live in georgia now. keep in touch and ill help you...
My buddy has a 96 GST and it has a spun rod bearing. What all parts do i need to order to complete this rebuild myself? I already know the crank probably needs replaced, but a small chance it doesnt. i know i need bearings, the knock is not very loud like other dsms i have heard with spun...