Does it come with Halo 2 as pictured in the trunk? My disk is all scratched up and I love that game

I ran Toyo Proxes4-Plus All season tires, 245-40R18, on my GSX a couple years ago and they were a monster in the snow. Second gear, 5-6000RPM and 25PSI with the wheel completely locked to the left and I still couldn't get them to break free after a light dusting of snow (Open parking lot)...

Slightlystoopod updated 1995 Eclipse GSXView updates to this DSM profile...

Figured I would update my list of current guns I own and my brother.Sig Sauer M400 FDE Enchanced (.223/5.56) - Shilen Match Barrel 16" 1:8 Twist, .223/5.56 Wylde Chamber, Leupold Mark AR Mod 1 1.5-4x20 Optic with a Leupold 1-piece mount, GDT Canted Ironsights, CMC Flat blade trigger with...

Unfortunately, so much truth in this.

Looking for a clean '95/'96 rolling chassis for a motor swap. Current chassis is sort of beat up and the wiring harness has been tempered with by PO that it's becoming more of an annoyance everyday. PST or post if you have or know anyone with a nice chassis. Not looking for anything special...

Slightlystoopod submitted a new DSM Profile :1995 Eclipse GSXRead more about this vehicle here...

My dream car is a MKIV Supra. Hopefully when I graduate school and get the financial stability for a Supra, I'll purchase one :thumb:

That is some phenomenal woodwork my friend. Outstanding job(s)!

Not a real good side pic but best one I got.Rims - XXR 527 18x8.75 Tires - Toyo Proxes4 Plus 245-40/18R

I. Hate. You. OP

My bulbs look fine and I haven't seen a short yet while going through the wires. I pulled out the HCM and took out the board. I noticed this around the front solders near the plug. Not sure if this is the problem but it looks sort of burnt to me. I am not an electrical expert

A great number of people give very helpful and friendly advice on this forum. Astonishingly, most of the advice given revolves around relationships (I wonder why?). The private hangout homes the best advice when it comes to marriage, become a supporting member and you'll find out, and I didn't...

Paul Walker dead at 40: report - NY Daily NewsTragically, our beloved actor Paul Walker has passed away from a single car accident and explosion. I loved the fast and the furious series. I thought it was good wholesome entertainment besides the infamous 420a in the first one that we all...

Got my License a little while ago. A few purchases so farRuger 10/.22 Carbine (Classic) Smith & Wesson M&P AR15 in 5.56/.223 Smith & Wesson M&P .40Not shown in picture, also got a Remington 870 PumpIn a few weeks I am also looking at a Savage BMag in .17 Winchester Super Magum

I can't see why anyone would bash Holsets besides the mere fact that an under $500 turbo can compete with the big ol' $2000 turbos. People spend ridiculous amount of money expecting so much when they could get similar or the same results with a $500 or cheaper Holset. I honestly LOVE my HY35...

Thumb'd :thumb:I thoroughly entire the whole EJ vs LS arguments in the comments sections. Pretty interesting swap though. Never would have suspected that that beast had a V8 in it

Signing in from Cape Cod haha. I very rarely see any Eclipses on Cape. Hopefully there is a few on this forum. See you guys at any meets probably

I have read and looked through many different websites trying to find a solution to my problem. My turn signals and Hazards suddenly stopped working. I popped the hood and noticed the fuse was blown so I replaced it with a new one. The problem I am running into now is that, with a new fuse...

Oorah! Hooah! Hooyah!I am doing this right? I applaud and thank you for your service good citizen of America. Keep up the good work :thumb:

Perfect :thumb:

I f***ing lost it right there. So perfectOr maybe one of those bug zappers. Taser might be a little extreme unless you want her to have uncontrolled muscle spasms on you. But it could make for less "work" if you know what I mean :hmm:

My first car was a 1994 Mitsubishi 3000gt Base Model 5-Speed. I loved that car. Quick enough for me (Not anymore) back when I was 16 and was a fun around-town car. I told it to one of my friends for $3,300. Apparently his mother thought the car was too "fast" and "scary" so they sold it, to...

It left a small gap unfortunately, but it isn't very noticeable from the front and doesn't ruin the look of the bumper IMO. I haven't seen any bumpers that already come with the slits removed in the mouth. Maybe aftermarket? Not sure.Here are a few pics of the before and after.Before...

I have a Holset HY35. I absolutely love it. 3rd gear, 2700rpm, turbo begins spooling and by roughly 4k-4.5krpm it can hit and hold 25psi all the way to my 8000rpm rev limit. More people go with the HX35 with the BEP housing since it basically makes the HX into an HY. Plus, HX (from what i've...

Replacement 1986 Bumper Cover | Auto Parts WarehouseThat is where I bought my front bumper from for my '95. The fitment is almost perfect and is badge-less. I used a very sharp knife to cut the front "mouth" part out so my intercooler wouldn't hit the bumper. I also did cut out the extra 3...

What is fu? And how do you hold it? I need answerzzzzz

Couldn't tell ya. No kids and its staying that way for a little longer

Condom - It's like taking a shower with a raincoat on... What's the point?

^lol

This is getting intense. I need to find some popcorn

+1 for creativity haha

+1 for creativity haha

Congratulations on your new girlfriend :thumb: Hope she is a good one and lasts for a while (unless you don't want that. Idk I don't know you well ha)

Diesel trucks don't have BOVs. They don't have a throttle plate except for 03-06 Ford 6.0 Powerjokes. Apparently ford couldn't figure out their problems with VGT Turbos so a throttle plate would help.Back on topic. I have my 95 GSX while in high school. Spent most of her time in my...

Internet History. Creating awkward situations and ruining relationships since the dawn of the interwebz

This is probably the best advice anyone has given in history. I second this above notion +1 :thumb:

I enjoy this shot the most even though the Blue plasti dip isn't perfect<a href="http://tinypic.com?ref=1442nv4" target="_blank"><img src="http://i43.tinypic.com/1442nv4.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

Quoted for future use of that statement. I love it

On my 1995 wiring harness, the CAS is under the intake cam on the drivers side. The CAS located on the side of the intake cam on the passenger side is not being used. The previous owner seems to have spliced in a Non95-96 CAS into my wiring harness since there is a trailer plug that goes to the...

I have an 1995 GSX with an EPROM ecu and Link V3. My car was a wiring nightmare and the interior was pretty bad when I bought it. I have done a decent amount to try and bring it up to par but still have problems (dash lights now don't work, directionals don't work, many service lights etc.) I...

"Now me and the mad scientist have to rip apart the block and replace the piston rings you fried."

When I was in college, I used to come home (2 hours away) once every month to two months. My GSX was sitting in my shop while I was away. Looking forward to working on it on the weekends I came home, one time my entire car was filled with packaging peanuts. Another time, my friend wrapped the...

https://www.youtube.com/watch?v=WA9V0roB82I This new 6 rotor is ridiculous. Watch their dyno video of it, made over 700hp on pump gas and no crazy tune. Also, its naturally aspirated which blows my mind more.Rotary is a crazy engine. Still amazes me to this day even with the amount of...

D2 Racing - High Performance Suspension & Brakes TEIN USA Home - The Official TEIN Site - Coilovers, Lowering Springs, Performance Suspension parts, and more KW product range /// When it comes to sporty suspension systems for every use KW is one of the leading providers. Megan RacingThese are...

^ This 100%. You should have kept your DSM out of the picture and people would have commented on it. You are on another forum to get answers, not promote and show how "superior" your DSM is.

If you are on a budget, then I would go pick up a nice Kicker CVR 10''. 400RMS, 800W peak @ 2ohms. I had two of those in a custom built box and they worked amazingly. Powering those subs was a Kenwood Audio 1800W amp. The entire setup was around $700 but nowadays you can get the same setup...

I just finished my Basic Pistol Training Course so I am now eligible for my FID Card. Need to now wait on the state to send it to me. I am looking at getting a hunting rifle for around or under $450 and in .308. I also love bolt-action over semi-auto for "sniper" rifles. I have narrowed down...

I tend to stay away from eBay parts. eBay comes right after cheap and unreliable. You get awesome FMIC kits for around $300 and they will easily outlast/out-perform most, if not all ones on eBay. I, myself, and alot of other members run a VSRF (VR Speed-Factory) FMIC and its an entire kit for...