uh oh....I guess I could only stay away for a year...brought another one home....I'll throw some pictures up shortly. I bought back my old 1997 GST from a friend I sold it too back in 2009.

That's fine, I am basically just looking for a motor but if I can find an entire 1g parts car with an engine, harness, etc then it is easier to make sure that I have everything. I am doing a swap into a non-DSM car and looking about building an engine beforehand.

Want to sell me your 1g now? I need it for a swap coming in the future. I moved to Siloam but go throw PG occasionally.

When you tuned the car and set up the idle and low speed settings did you account for that difference? If not, your car will be running and tuned 1.3 difference all the time, at idle it won't matter much but at WOT you may be running really rich and losing some power. When I get to a computer...

Are you using the preset settings for the AEM in ECMlink? If so you should try using the linear wide and "generic" setting and calibrate it yourself so they match. There is a tutorial on the ecmlink wiki. You will tune via the ECM link data so you need them to match before you do any serious...

Trust the wideband, if there is a difference between the two it means that you didn't configure th wideband input correctly in ecmlink.

I picked up a new project to keep myself sane. We also just bought a house and it is driving me CRAZY, it is nice to have a chance to step away for even 15 minutes and tinker on the car and fantasize to ignore all of the house and school issues.

I'm in NWA as well, Siloam Springs, I had a 280z a few years ago and did a slight restore, this one I'm gonna go all out now that I've built my bodywork and fab skills.

Hey guys been inactive for a bit since I sold my talon but picked up a new project this weekend I wanna share. 1973 Datsun 240z, saved it from a friend who was going to scrap it since he moved and couldn't take it. Came with 1500$ of new parts still in the box.....only paid $500! I couldn't let...

Too bad to see it not stick with someone. That's the life of a DSM, gets passed around for project after project until the original owner decides to snag it again. I'm tempted to buy my original GST from my friend I sold it to after highschool. He blew the engine and it has sat for years calling...

Yea I was happy about the sale. I have to take it to him today as he swing by after work. I had a few highschoolers interested but I didn't want to have someone tear it up. Now to figure out what to do with the datsun. Me and my wife are looking at some rental property so I may have to get rid...

Just sold the talon, to a fellow DSM enthusiast as well. His first car was a white 1996 eagle talon TSi AWD....I feel that it got a good home.

Or you could let me keep the engine and ecu plus 4000. Then swap your gst engine....I am putting a 4g63 in the datsun....

Decided to list my talon to fund the Datsun project. Would prefer that this goes to a DSMerhttp://fayar.craigslist.org/cto/3938577061.html

Even with a cracked wastegate you should creep past 5psi on an unported 14b. Do a boost leak test first and make sure no serious leaks are around.

Sounds to me like your battery may be down some, my 210 recently did this, charger the battery full and try again.

Throw out a price for what you are looking to get for it, I'd be stripping the thing as a donor for a race car anyway...

Yea what's wrong? I might be VERY interested in it, atleast the motor and harness for the right price.What issues and price you looking for

So I picked up a new toy which will shortly have my motor swapped into it.1979 datsun 210

I know where you are coming from but EVERYONE does an rb, sr, or KA swap on them, I have also thought about a SBC but that puts me in a whole new class in NHRA that wouldn't be as competitive for me.And it's a 210, slight different body lines but similar chassis. A STOCK NA ka motor swap nets...

Ok guys I've decided to finally build a straight drag car with a 4g63 swap, I'm picking up a datsun 210 this weekend with a cub weight of <2000 pounds.The talon will now be for sell for $5000 without dsm link and 5500$ with it tuned.Anyone looking for a great platform? Just finished all the...

Damn that's nice. No I haven't watched any E3 yet I probably will catch up tonight. I watched the Apple Keynote this morning and got the Xbox order email this afternoon.

I just preordered my Xbox one Yay

I'm fixing to head out to Tulsa's Import Faceoff 2013. Don't expect a lot of eclipse or talons representing but the Evo crowd will be out in full force.

Well keep the offer in mind, I'm looking to start a new swap project and put a 4g63 in a datsun roadster. A donor car would be halfway there...

Man you can't catch a break. Sell your camaro, and trade me the gst plus 5250 and take my talon and you'll have no more problems....

Cox for me, 25mbps upload, 6mbps download :D I typically get host position on Xbox Live

I had this issue and it was due to the mass airflow sensor harness connector came loose. Have you done any work in the bay recently to need to double check connections? The weather seal inside the plug can get distorted and make it not "click" back on easy enough.

There is not a satellite Internet service under 200$ a month that will let you play online games like CoD at a decent speed. The upload speeds are WAY to low and cannot compare to a deducted hard line.Keep going up the ranks to their supervisor you can get out of it I'd you raise enough hell...

Said 420a owners who just lost all torque....throw up some pics

Hey man glad to see another NwA member around. I teach at the university and am around quite a bit. Currently live in Prairie Grove but end up in Fayetteville daily, let me know if you ever need some help I'm always up for some wrenching.

Nice day for some upholstery work.

Why a torque wrench for inch pounds? Just snug it tight by hand.

My plan is for a datsun roadster, super light and tons of suspension mods due to the racing industry for them.

Shave th while thing.

No it actually mounts inside the door pull cup. I will probably cover them with headliner material to clean them up. The doors are rock solid now.

Got tired of my doors squeaking so I did some stiffening with expanding foam and created some metal door pull plates to expand the forces across the panel more. Makes a huge difference for 20$ in supplies. Now just gotta tighten up the window rattle and ill be happy.Each will be trimmed and...

It could also be a virus, there are many viruses that high jack a browser and regenerate HTML code o use their own ads....

The bug bites quick, I can't believe I stayed away from a DSM for two years, now I can't stop tinkering on my own. However, now it has become more of a DD and I have to be careful how long I rip it apart for to get things ironed out.The next round of modifications to the car are more for...

I'm picking up a gs with a black interior possibly, anyone want to buy the dash and console? Rest of interior is tan.If I can find a solid buyer for interior parts the wife won't be able to bi***.

Powerblock is entirely ran from sponsorships so it makes sense to me. Atleast powerblock still shows fabrication unlike Speed which puts on Truck U, the show that only shows you how to bolt on shitty, overpriced parts from summit racing....velocity has car fix with Jared and Guy which use to do...

I use them in my lawn equipment but that would be the ONLY thing I would use them on. I might also use them on an NA car or truck as they have been proven but why didn't he just go to a different store? He could have bought 3 sets of NGKs for the price of the E3 plugs....You can probably still...

How long are you waiting? It took my brand new lifters probably 50 miles before all sound went away.

They are all pretty similar in quality for what 95% of us use them for. I went with an lC-1 purely for the gauge that matched my Glowshift set. Now if we were truly going all out and running a wideband on each exhaust outlet like some of the top contenders on here I think the mtx would be much...

They are different sellers, also notice that one has the indent for the mitsubishi logo while the other does not.Personally, I would go with the one without the indent.

Yes, should be fine if you are talking bumper, skirts, and rear

Good to see it coming together, mine is back on the road...for this week...I got a small coolant leak in tracking down...

What did you pay for it if you don't mind me asking? I'm still debating selling my talon to snag this avenger gr kit car (gt40 styling)....

Nice, love those wheels, pick up some plastidip and kill those yellow center caps though.Cabot, can you shoot me a Facebook invite on there it looks to be invite only. Zach.steelman