I know I will probably catch hell for this, but I am having a low oil pressure issue on my new build and cant seem to figure out why. I have been through two gauges. One mechanical gauge and one auto meter digital gauge with remote mount sending unit. Both read anywhere form 0psi-5psi at...

I have searched for a few weeks now and cannot find a for sure answer to my issue. My car has sat in the garage for almost 3 years being built. I recently installed 3 gauges but am having multiple electrical issues. All of these items worked prior to parking the car.I have no wipers. I have...

Purple_Demon submitted a new DSM Profile :95 TalonTsi My First DSM BuildRead more about this vehicle here...

I am doing a full rebuild of my suspension and have come down to the rear lower control arms(not the toe arms). I have the full Energy Suspension kit and have installed all of them, but the control arms dont work...Both control arms have the "taper" outside of the metal sleeve. Both of the...

Got my punishment racing o2 housing and was concerned about the ammount of gasket overlap. Is this too much overlap or flange showing?

I picked up a new Fuel Lab AFPR a while back and I finally got around to installing it. Well the gauge that come with the kit doesnt seem to want to thread all the way in. It gets around 4-5 threads in and stops completely, even when using a wrench.I have tried running the NPT tap in both the...

Just wondering if anyone knew where I could get some replacement parts for a set of ARP main studs? I have a set that is missing a few washers and nuts. The Head studs are listed as 11/12 mm but the ARP Mains list as 10mx1.25. Does anyone have a tip or suggestion?

I recently picked up a set of "Twisty" Side Skirts but it was missing the front drivers cap. After some searching a member on here sold me one that was supposed to fit. Well it doesnt, it sticks out too far.The correct piece is on the left. The piece I was sold is on the right. Notice...

I cannot seem to find a topic on how to tell differences, so apologies if there is already one. I found out how to tell differences in transfer cases and transmissions, but not rear ends.Long story short, I am going to buy a shell with an LSD rear end(main reason I am buying it). The car...

I was wondering by chance if anyone knew where I could find a Tial MVS-A for purchase. I have been looking for a few days now and all results lead me to the standard MVS. I am seeing the newer one with the heat dissipating fins between the actuator and the casting.Tial MVS-A TiAL Sport - MVS-A...

I am shopping around for gauges and would like to do something other than the usual autometer gauge. I am getting Innovate for the A/R for sure. But I am also looking to a boost gauge and oil pressure gauge. A particular style from Innovate caught my eye, their D3 series. But I have yet to see...

Power Goal: 450awhp-500awhp Fuel: 93 octane-Fuel Sending unit with 255hp rewired and -6an fitting welded to the top for direct AN line attachment - Have. -255hp pump -Fuel Pump Rewire -FIC 1150cc injectors -A1000 FPR -STM Tuning Tank to rail kit STM | 90-99 DSM FUEL TANK TO RAIL KIT...

I am curious to what methods everyone uses to defog their windows if they have deleted their A/C.I am in the middle of my build and my car does not have A/C and I had no intentions of re-installing it. But I also live in Ohio so we get a frequent amount of rain and causes my front window to...

Just wondered if anyone else was having issues with paypal. I am being told I have to provide a copy of my photo ID, social security card, and billing address.And now I am listed as un-verified. I have been verified for ages and now they are saying that due to federal regulations they...

Im slowly inching towards being able to build my 6 bolt bottom end and get it swapped into my 2g. But I have stumbled upon some problems and concerns. I purchased a used 6 bolt motor that had started to eat at the mains and rod bearings and at the time I thought I was getting a great...

Ok ill keep this short and sweet.....Ive been searching for literally days trying to find out if a single in tank walbro 255lph fuel pump will meet my needs. I can find all the injector, dual pump, and 400lph info i need, but nothing for the 255.setup: 2g Tsi Hx35 93Octane -6 an fuel...

sold

Ok I have searched but the answer to my question hasnt really been answered in other threads yet, so bear with me...I recently purchased a built 6bolt block from a friend only to find out the wiseco pistons had cracks in them. So I took the block to the machine shop to have it...

I had a specific question about the Greddy intercooler on my talon. It came on the car and worked fine for the previous owner, but I personally am not too comfortable running an intercooler that looks to be this banged up...I have a friend currently wanting to give 200cash for the...

Well I decided to tear apart my 16G that came on the talon and do a quick rebuild and just turn it for a little money. The turbo had a good bit of axis and in/out shaft play. I already have a turbo im going to be using once the motor is rebuilt. But during dis assembly the nut did not want to...

1995 Eagle Talon Tsi Actual Miles - UnknownPicked this shabby guy up for 2,000. A friend of mine owned it in highschool and it wound up being sold to a few people here and there and I wound up with it.Current mods:***Updated Mod List***Suspension: Megan Racing Coilover System Rear LCA...

I recently picked up a 95 talon tsi for a decent price. Well the decent price came because of bad rings in the 7bolt motor. I have had a Burschar 6 bolt shortblock in my bedroom for some time now and will be switching the 7bolt out for the 6bolt. But I have a few concerns about the internals of...

Hi everyone!I just picked up my first DSM a few days ago. I got a Black Cherry Metallic 1G Talon, 5 speed for $600. clean title and no rust..well sorta. No motor, trans, or drivetrain other than a drive shaft.I rove 8 hours round trip for this beauty, upon getting it home I found out the...