Need some help, after not finding an answer searching online. Im working on getting my 2g back on the road after rebuilding the engine over the last few years. After having the car aligned a few weeks ago i had an issue that when i stopped at light after 20 min of driving, the car felt like it...
I wanted to ask if anyone has used an oil pan from a 4g64(MD332039) on a 7-bolt 4g63.?Im looking to have an a/n fitting welded to the oil pan so i'm not worried about it not having the spot for the turbo drain. More so want to make sure it will bolt up in my gsx without issues. I searched...
I am putting my engine back together and picked up some id2000cc injectors from someone. I had them checked by ID and they are for the dsm and flowed fine. While they checked them all new seals where put on. While doing my boost leak test tonight the injectors sounded like it popped up and...
I have a mhi small16g that was rebuilt and upgraded to a 20g wheel by turbo lab. It comes with fp 17psi waste gate actuator, jpipe and -10 drain and -4 feed connectors. What's in the pics is what it comes with. Zero shaft play. Only has idle time on it before I upgraded turbos. Asking $450...
I have a set of used Tien Flex top hats from a 2g. the bearings seem to still be in good shape. They came in a trade so i have never used them, but previous owner said they worked fine and didn't make any noises. Ill do $65 shipped.
I have a 2g black steering wheel in good condition $45
Black powder coated intake manifold and tb with tb gaskets $45
Passenger side j pipe $25
7bolt ARP(missing 1 washer) head studs torued twice $Sold
Manual boost controller $10
Working coil pack, no bracket 2g $offerAll prices are picked up...
With this rebuild I changes the injectors, fuel pump, fuel filter and feed line. Previously had an evo9 fuel pump on stock lines.I had to cut the feed line on the engine bay side because it had a kink in it.
I have a walbro 450, 6an tank to rail, fuel lab pressure regulator and stock return line.After my engine rebuild and upgrading some parts I can not get my fuel pressure to drop at idle. I am going to pull the hanger back out and make sure I drilled out the siphon already. My question is, is...
Did you finish installing the shifter? Did the center console go back in after? Trying to find pics of the 3g shifter in a 2g with the center console reinstalled
Are the rod ends/heim joints a common size, if so what size or do you know if they make a boot for them? Would there be any benefit to putting a heim joint in the top of the knuckle as well?
Sounds like the end clutch kit o-ring. When i installed mine the first time to o-ring twisted and tore a little on me and caused the issues your having.
Thank for the suggestion, but it ended up being the cam was holding open the valves. The vacuum leak would have shown its self when i did the boost leak test. Also some metal got into the top of the pistons and destroyed the rings.
What I used for firing order.
http://www.dsmtuners.com/threads/firing-order-2ga-2gb.459087/reply?quote=153218004It's tuned with just a 2g maf, no speed density
So I don't know where else to post this and feel like I am missing something like a noob. The car has a new 2.3l JAM stroker that only has some idle time on it. My mods list is up to date. The car starts and will idle no problem, once i try to rev the engine it sounds like its backfiring and...
Does any one know the length and size of the bolt for the clamp for a tial 50mm bov. I seemed to have lost mine. I found the tial part number but was hoping to buy the bolt locally.
I used the Morimoto Mini H1 5.0, with the mini gatling shroud when I did my retrofit. They have held up well for 3 years, the only issue i have had is the headlight fogging over again, but that has nothing to do with the retrofit. The install was easy and straightforward, and I choose the h1...
After finding out that i had 40% leak down in 2 of my cylinders over christmas break I decided to pull my engine and rebuild it, even though it only had 20k miles on the previous build. This time i am taking my time and learning from my mistakes of the first build. The motor will be a 2.3 long...
I'm going to bring this back from the dead. The linked article is refrenced in several different threads but is no longer active. I wanted to ask if anyone had a copy or knew where to find it. Thanks
I am not near my eclipse and will need to transport my rear subframe. Does anyone know the dimensions of the rear subframe, I am trying to figure out if a fully stripped down 2g subframe will fit in my wife's golf for transport.Thanks
I need to replace my front passenger side axle. I have used raxles in the past but they no longer do dsm. I have been reading on the forums and see most people recommend GSP or tough-one axles from advanced auto parts, but they no longer sell them. Advanced auto parts now carries carquest...