The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

Search results for query: *

  1. zedicus

    Who still offers parts for DSMs in 2021?

    http://www.rockauto.com/RSS/vehiclefeeds.php?carcode=1205570&m=wc&l=en&html=trueFelpro head gasket kit on sale for 54$ valve cover set on sale, some good deals on belts. i use rock auto for a lot of the generic stuff.
  2. zedicus

    Is A 4500# Winch Enough?

    you could get a double over pulley also. https://www.amazon.com/Extreme-Max-5600-3027-Snatch-block/dp/B001TW1LO2/ref=sr_1_50?_encoding=UTF8&c=ts&dchild=1&keywords=Towing+Winch+Snatch+Blocks&qid=1594153201&sr=8-50&ts_id=379523011honestly i use a crappy harbor freight 2500lbs rated ATV winch on...
  3. zedicus

    SAD PANDA

    out with the old. the new motor is partially built, i am hoping a couple more paydays and i can finish it off. the tranny only has about 1000 miles on it since being rebuilt, i am still sure i should open it up and add a 4 spider center, though. drive shaft was rebuilt before the car was...
  4. zedicus

    Farm Field Find

    this 2g was sold a couple years back. the kid drove it for a while and tried turning the boost up way to high and popped the head gasket. i helped him swap out the motor, he then sold it and now it sits in another guys yard with a bad fuel pump. i debated buying it back at one point.
  5. zedicus

    SAD PANDA

    mall shot of the current inventory, Kevlar belt, fluidamper, gear driven clutch, fresh viscous coupler, the ITM kit on the side is from something else, it just landed in this box.passenger side front end removed. check out that strut. guess suspension is higher up on the list than i might...
  6. SAD PANDA

    Street Build SAD PANDA

  7. zedicus

    SAD PANDA

    zedicus submitted a new DSM Profile :SAD PANDARead more about this vehicle here...
  8. zedicus

    2G Help with a modular cooling setup or EWP

    i JUST got done doing a davies craig install on a toyota. it was a small pump EWP80L and the previous generation DC8907 EWP controller. on MOST cars the thermostat controls rather coolant goes through the radiator or bypasses the radiator (there are other systems but this is most common and...
  9. zedicus

    2G Ticking noise

    man i wish i could here that in person. it sounds like it is faster than engine RPM... are you still running balance shafts???
  10. zedicus

    2G Cams

    you are again correct but really, we are not in disagreement. "We wouldn’t have made 325whp on stock cams..." absolutely correct, but the cams you installed shifted the peak out towards the end of the RPM run. remember that you always build power as you build RPM unless there is another force...
  11. zedicus

    2G Ticking noise

    yeah it is hard to tell any spacial info from the video, i was just trying to think of similar sounds.since it is not all the time and rev matching you can at least rule out things like lifter, rod knock, alt bearing, what you are looking for is something affected by load. maybe timing...
  12. zedicus

    2G Ticking noise

    is it an act clutch? kind of reminds me of a broke clutch spring rattling around but not dislodged from the clutch.
  13. zedicus

    2G Cams

    its funny how you said thats not true at all, then in the same thought mentioned peak HP at 7500RPM (500rpm off from what i said...fine)look i don't disagree that there are better cams than the stock ones, especially if you EVER go to the strip. and the stock cams tend to fall off before...
  14. zedicus

    2G Clear Taillight Refurbish

    tape a small rubber hose to a shop vac and stick it in through the bulb hole to get the bugs out.the chrome spray paint sucks. even the chrome automotive grade paint you have to mix and spray through a gun is not very chrome. Eastwood makes a spray paint for the inside of lights that isn't...
  15. zedicus

    1G Factory oil pressure gauge not reading

    just take that pic from stmtuned with you and find one that looks like it. a chrysler, DSM, hyundai, kia, and a ton of stuff from 1990 to 200x all use that same sender.
  16. zedicus

    1G Factory oil pressure gauge not reading

    correct, it is not a factory item on that car.so decide if you want both the idiot light, and the gauge. you can do this. https://www.dsmtuners.com/attachments/84e5ec22-f32b-45e4-91cd-7ba44ec7de7d-jpg.327421/or you could just run the sensor and ground out the idiot light, but with out doing...
  17. zedicus

    1G Factory oil pressure gauge not reading

    here is what you should see. https://cdn11.bigcommerce.com/s-26dh6/images/stencil/1280x1280/products/406/4140/P1220314__21777.1510868743.jpg?c=2here is what you have https://www.dsmtuners.com/attachments/2ezqzxx-jpg.433276/
  18. zedicus

    1G Factory oil pressure gauge not reading

    you have a front facing oil filter housing. did you know that???the most common thing to do is swap that switch for a sender and then hook the cut wire to the sender. you will have the pressure gauge but the idiot light will be on. how involved do you want to get here?
  19. zedicus

    1G Factory oil pressure gauge not reading

    usually the sender wire is broken right by the sender. something about being covered in oil and 4 inches off the pavement makes them fragile... you are looking for the wire off the middle of this thing. https://stmtuned.com/products/oem-mitsubishi-dsm-oil-pressure-sending-unit it is just over...
  20. zedicus

    2G Cams

    for a street build/daily driver under 400hp i would put the stock cams back in and degree them. MAYBE do a regrind but that would be it. there is a lot better areas to spend the money on than cams in a street car. cams primarily move the power around, great if you are building an 8000rpm...
  21. zedicus

    2G Turbo Oil Drain Line Angle

    man people are still fighting with the holeset drain??i am going to make a few of these... gimme a couple weeks to get flanges cut and press them together.https://www.dsmtuners.com/threads/new-holset-drain-idea.512815/
  22. zedicus

    4g64 dohc swap using two timing belt tesnioner pulleys

    the lower section that covers the oil pump (and the oil pump itself) are the same DOHC or SOHC. so you could find the lower section from a SOHC 2.4l 3rd gen eclipse. the upper part may be a challenge to find. but honestly i have ran cars with out the mid or upper timing cover section. just be...
  23. zedicus

    1G chery or am i crazy?

    well yes most ICE engines are similar, the chery looks like a re-engineered 4g63. here is a side shot of the block and one of the motor mounts.unfortunately i missed the sale, so the world may never know. still if you guys come across a Joyner or Oreion UTV or sport UTV for sale, go...
  24. zedicus

    1G chery or am i crazy?

    does this look a lot like a 4g63? there is a 3 and 4 cylinder version and the trans mounts all look identical to a 4g63. even the head beyond the weird SOHC gear with gear driven DOHC cams looks close.i ask because there is a UTV roller near me that needs a motor, and i started looking...
  25. zedicus

    ECMlink isc input log something else?

    i wonder if the isc stepper could be set up to control a mivec butterfly... or maybe a NOS trigger? seems like a waste to just abandon it.
  26. zedicus

    ECMlink isc input log something else?

    the car i am building now has the FIAV and ISC removed. can i feed something else into the ISC input and use it for logging? a fuel pressure sensor would be the bees knees. does link have an ability to swap that sensor? i have link v3 for this built but the motor is still next to the...
  27. zedicus

    420A Boost?

    why not look for the non-evo based 4g63, or g4cs and or 4g64 blocks? any of those should be 500$ USD. probably running. the only concern would be if you picked up a wideblock 4g64, but in a custom application i do not know that would matter much. if you want to do something crazy you could go...
  28. zedicus

    2G Small 16g with evo 8 fuel pump

    honestly a better pump and a pump rewire and a 16g set to 15-20 psi or pretty standard fair. most of the people saying to get tuning first and waving the cautionary tale have probably done it themselves with out any tuning and had good results.my recommendation, would be to get a wideband...
  29. zedicus

    2G High Mileage 6bolt motor, worth buying for rebuild?

    he is serious. there are race teams that pitch iron blocks out in the elements for years and then use them in their race cars. bore that thing out 1 size and run it. (if you are having pistons made a bore might not even be necessary)
  30. zedicus

    HX-35 BEP .55 Housing Results on 2G AWD(1/4 and Dyno)

    that info is fairly old. i am building an HE341 holset build and it is actually similar to what an hx35 with a .55ar BEP housing set up is (VERY similar actually) my goal is 24 psi with over 500 HP. (other engine mods make for huge variables) the reason i went this route over a modded 16g or...
  31. zedicus

    Help me pick a turbo

    http://www.dsmtuners.com/threads/new-holset-drain-idea.512815/that is a good holset drain with VERY minimal pan modding.
  32. zedicus

    Help me pick a turbo

    an he341 or he351 are T3 single scroll with a vband exhaust. they are nearly bolt on easy. (do not get one that says VGT)oiling the Holset is easy, it is the drain and the drain kits that are way undersized that everyone gets wrong. (and that people run a small feed line and a restrictor...
  33. zedicus

    TDI swap questions

    totally random thought but there is a diesel 4g63 that was used in forklifts. allegedly it is the same narrow 4g63 as the car engine, but fueling, and the head, pistons and everything is of course all different. figuring out the differences could make it possible to build up a automotive 4g63...
  34. zedicus

    RTMracing gone way down hill??

    i have ordered from them a Few times over the last year and it wasn't terrible. some stuff arrived on time, some stuff was a little delayed. one item had some missing bushings. took me a couple weeks but he did make it right. these smaller shops i am extremely lenient with. i work in...
  35. zedicus

    1G FWD NA Flywheel Help

    that most certainly is a FWD non-turbo tranny.
  36. zedicus

    1G FWD NA Flywheel Help

    starter locator plate, starter, flywheel, all need to match whatever tranny you have. post pics or the number off the tranny for help in identifying it. (if it has a place to mount the transfer case it is an AWD tranny) and yes, the 1g NON-turbo 4g63 TRANSMISSION does use a different clutch...
  37. zedicus

    Fast Cars?

    muscle cars are common out here. Lt1s to old style 350 SBCs and of course LSx in all variety. the well built ones will absolutely pin you to the seat, for 30 to 60 foot. as soon as they get passed the initial launch they just feel like someone pitched an anchor out the trunk. And the truck...
  38. zedicus

    POS Carbon Creations hood

    VIS and Seibon do use a lot better resin in their products. they resist UV degradation about 10x better than the ebay clones. typically if the person wants it painted to match the car i recommend the ebay clones and then after fitting and prep work and a heat barrier is installed they last a...
  39. zedicus

    POS Carbon Creations hood

    Did you happen to put any thermal shield on the under side of your expensive cf hood? Have you ever waxed the topside with even a cheap turtle wax? I am going to guess both answers are no. Want to save it before it looks like sun burned crap? It will probably take a weekend worth of work...
  40. zedicus

    Manny The Mistake: A Lesson In The Dangers Of Nostalgia

    if you still need to replace the hatch board that goes under the carpet go to home depot and get a piece of this stuff, lay your carpet on it and trace it, then cut it out with a jigsaw...
  41. zedicus

    Here is transmission part numbers we all need

    i couldnt find any new, i ended up paying 300$ to have one rebuilt.http://www.dsmtuners.com/threads/rebuilt-coupler.514950/#post-153670950
  42. zedicus

    rebuilt coupler

    couple pics of the rebuilt coupler. looks good as new, going to hopefully get it installed this winter but wife thought the holiday season was a good time to move.
  43. zedicus

    rebuilt coupler

    found a place that will rebuild our center diff viscous coupler. for those who are mostly street this might be the better option. i plan on running the rebuilt coupler and a 4 spider center.cost of rebuild was 300$ i will post some pics of the coupler tonight. i have meant to post pics but...
  44. zedicus

    HX35

    AN fittings for the drain is a terrible idea.http://www.dsmtuners.com/threads/new-holset-drain-idea.512815/
  45. zedicus

    For Sale WTB old viscous coupler

    i found a company that rebuilds VCs and i would like to send them one of our VCs to see if they can create a rebuild for them. sell me one please, so i can send it to them.
  46. zedicus

    1g 3-bolt 4-bot rear housing the same?

    wondering if i can put an evo LSD in my 3 bolt housing, change the seals, use 4-bolt axles, hub cups, and evo diff side cups.does anyone know if the 3-bolt and 4-bolt rear end housings are the same? if so, this should work.
  47. zedicus

    2G Short throw shifter

    the top part of the shifter is easy, just grinder down the handle about 2" bellow the thread small enough that a tap will fit over it then tap it. and cut about 2" off the top. the bottom of the shifter needs to be made longer actually but that is not a big deal really.like this turning...
  48. zedicus

    2G Short throw shifter

    with as cheap as the typical DSMer is i never figured out why modifying the stock one isnt the common practice. the Megan one isn't as tight as a modified stock shifter even. and it is one of the simplest things to mod in the car.
  49. zedicus

    1G Really bored 30 over?

    the very top of the cylinder is always the smallest, by fractions i know, but still. the caliper is fine for your goal, you are not trying to buy pistons based on the reading just figure out if it has been bored. so according to your numbers it has not been bored.
  50. zedicus

    I have a GSX.. what to do with it?

    bore scope and post pics. a guy could ball hone, pistons, valves, lifters, bearings, and be out under 1000$ and a weekend. they do not have to be expensive to be reliable. its only when the HP bug bites that people start breaking stuff quick.and as far as turbo cars go, the DSM is dead...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top