I am selling my built 6 bolt manley pistons on eagle rods, OEM rebuilt head, its coming with everything you need new gaskets, bearings im also putting the MHI 16g turbo with it. Call or text for all the details 540 408 9610. I just want to put this money into my srt4 everything has 0 miles. I...

Im in p.g. county. Last year was my first year going to frederick I had to go to York P.A. to get a 7 bolt.

Good observation. Check the recalls because I do believe there was a hose recall.

I was highly confused to. If your car isnt moving then to me its most likely a trans issue. How we got to a head gasket issue I do not know. Sounds like to me you need to pull both pans.

Drop the trans pan and inspect the fluid if there is a magnet in the pan perhaps take a picture of how much metal is on it.

Its the booster ive seen this problem a few times in the dealer. Swap it out.

I think you misunderstood me. I know I have to have 2seperate ecu's. What I mean is can I use the software on two cars and still save data?

Pump gas and Jacksons is going to build.

Jacksons in hanover is a very good machine shop. I used him call him and talk to Tony and tell him Tony sent you. (My name is Tony to)

Ok this is what I want 2g gsx. 600hp. Thinking about a pte 6262. I dont know to much about housings and compressor covers. The pros and cons of journal bearing and ball bearing, internal and external gate options. Im not really sure about all the little things to go with as far as clutches, twin...

Of course 90-94 doesnt have creash zone sensors because it doesnt have air bags. So yea you have one. If I remember correctly your not supposed to put a ohm meter to the sensor because you can cause it to send the signal to deploy the air bags. This is the best way I can explain how it works. If...

How many miles on the engine ? Think about why the 2 holes in the middle are around 150 and the 2 outside ones are 160's.

ExtremePSI.com You need to check your crank. I bet you have a lot of metal shavings all through out your oil pump, and block. If you just replace the bearing im sure that you will have to tear it down a second time and you will waste time and money.

I was going to go with the evo pistons but then i realized that the price for the pistons would be 200 more for a fully forged piston. So ponder on it for a second before you buy. Two things I regret in my build that I purchased a Evo III 16g turbo, and 650cc Injectors. I now want a pte6262 and...

How do you plan on making it to 350 - 400hp ?

Tony did my machine work on my block and head. Great work! Bogus refered me to use him and I did. I will be using him again.

:ohdamn::banghead: Im not going to flame, im not gong to flame. I would just get anoher 2g manifold.

You can find afc's all day for under 100 used. I have one, and I will be switching to dsmling and a speed density setup so maybe by the end of March or the start of April I will be elling the afc for the low. You can even find dsmlink cheaper used.

Ok thanks I found an oem cut down shifter in the classifieds.

Ok thank you. Any input on those bushings ?

Has anybody heard of horsepowerfreaks.com, and ralco rz ? I want to make sure this website is legit and the rz parts on acceptable. Im looking for a 1g short shifter. I was looking at this product Ralco RZ Short Shifters from HorsepowerFreaks. I have oem shifter cables should i get...

Im dont know shit about shit when itcomesto body work, but I always thought hood pins was focaron fiber hoods not having the latch on the bottom, and because its so light its going to try to move. I cant see the pins doing a better then the oem latch.

I never understood why people always throw out there I" hope he means he was at the track". He never gave a location so just leave it alone. If your hood isn't moving violently while going that fast I would assume it should be fine. Ive been in a friends bmw while moving fast and I saw his hood...

Tip for the OP. When u search make sure you hit the drop down box that says "search entire post" and change it to search titles only. It took me forever to realize that and I felt like a flaiming idiot, but it makes a world of difference.

A 93 is a 7 bolt. Your not supposed to use "lol" here. All it takes is a little capitalization and punctuation. They dont even rip your head off to hard for not using commas. I know capitalizing and punctuation marks is well before grade 12. You spelled damn wrong to. :thumb:You shouldn't...

The motor still hasn't been ran. Meaning it also hasnt been hot as hell from engine temps which im sure has a lot to do with a headgaskets wear and tear.

I got a shell in Upper Marlboro MD. 95 gsx shell for 600. Tt needs a motor comes with a transmission, needs suspension wheels tires driver seat and transfer case. My 1g wheels are on it now so those are staying with me. I do not have pics now as i am in another city and without a cam phone right...

This had nothing to do with re-using a head gasket. Im not a pro but the motor wasnt started I would reuse it.

I havent done it with exhaust yet. I did it all the time with my stereo tho. Everytime I drove threw this one spot in DC past an apartment complex I always set off the same jeep liberty's alarm.

What proof do they have that the engine only has 950 miles on it.

:barf: Damn those things are ugly.

Im a 1g guy with no fog lights anyway so i wouldnt understand. JAM is a very good shop. (see pics on page)

I did it with my RSX all the time and never had an issue with it. Which car are you doing it in. With mine if I messed up wit would flash and put it back up a gear.

F*ck those prices. :notgood:

If your not getting girls now you wont get them later. I see more guys walking to the store with a girl down the street then I see most guys in a car with a girl. (A new girl thats not already his girl or wife)

I wanted the OEM but its like 260. I went with the topline kit and used a cometic MLS. I would put my trust in fel pro to, but my next build will be OEM.

Great info guys im on it right now ! :thumb:

Ok Time to do some more part shopping ! I dont think extrememepsi carry these things any Suggestions on where to look. You kind of lost me on UICP. My guess is upper intercooler pipe. Im searching now.

Newbie question. Is this all thats needed for speed density ? EXTREME PSI : Your #1 Source for In Stock Performance Parts Im sure its not.

I dont know how much Greddy FMIC cost but VRSF is running a sale right now on there kits till the end of Feb. Everybody Ive seen that posted on here say that the VRSF kit is better then Greddy. The guy who posted earlier (jacksons) did my machine work pics are on page. I would give them a call...

Haha you did didnt you ? Some people dont care about oil squirters find one of them. If your time is valuable like mines you would just pay the 185 for squirters (labor). I would check into using the shorter evo squirters as well.

Whats a rex ?

Well I do have a few people around that are into dsm's real heavy that will help with the tune.

O ok thanks for the help I will go with speed density and link.

O ok I thought I would have to get better springs regaurdless. I did have a stock rebuild tho.

Yeaaaa im not even going to lie to you I heard nothin but good things from them so lets just say I ran across the street with out looking. What would you suggest ?

:D I got two montero sports sitting at the garage I should nab um !

What does one do that the other doesnt to, better yet what do the others do that the 1g cant do.

Hello tuning world ! Ok I got a 1g build going on. I have everything so far needed engine wise, now its time to think about tuning. DSMlink is a must. I assume I have to send out my ecu and get it "socketed" I think thats what its called. My real question is about MAF's. Which one is best to use...

700! :applause: