Hey guys i'm new to this whole ecuflash thing and i have my 1G already setup for a blackbox ecu. i've been reading a lot and decide to give it a try. The thing is the first time i did a read and flash everything went perfectly but since that the Ecu won't let me Flash again only read the rom...
Hey guys i'm really interested on having my T4 .68 precision turbine housing machine fit a HX40 i too have. Who can do that? from some measurements i think it can be done. Really want to do this because car is already is setup on that turbine housing.
Hey Justin, i was cleaning my garage and found 2 turbine housings around. One is a Pte .82 T3 from a 6262 from a 62mm Precision turbo and also have an old mhi 8cm turbine housing machined to TD06h spec. Now i was givin a lil bit of thought about having the Precision machined to accept a HX40 or...
Guys any of you have any video ?? I'm anxious to test any of these 2 turbos but i'm afraid they'll spool later in the 6000 rpm on my stock block motor.
Now that you mention it i didn't noticed the rubbed on the exducer side. I really don't know what could happend there. I was on the track on monday and it did went overboost 1 time but i did lift. So you think i'm not overflowing the 8cm?By the way she already spools a lil later over 5000
Justin i removed my Turbo today because i want to ceramic coat all my hot parts and came across this Turbo is a 35R billet compressor wheel on a Td06h thru a 8cm turbine housing. I'm afraid the 8cm isn't flowing enough to handle the the 35r compressor wheel. I have this T3 td05h 10cm housing...
Hey guys here's a little video of my 1989 Mirage 4G63 AWD.Mods are on the video. On my last pass car made 1.73 on 60 ft. But apparently broke 3-4 fork. Let me know what you guys think1989 Mirage Turbo AWD 11.5 @ 127 - YouTube
Hey Jus, What's the safe bore for me to machine a T3 10cm housing for it to accept a TD06H turbine? I ask you because i have access to a machine shop and would love to do it myself and have to send it out.
Thanks in advance
Hey Jus and guys!!I picked up this turbo advertised as a 60-1 but found out it wasn't. I take some measurements and on the compressor side the inducer measured 57mm and the exducer 70mm. The turbine wheel seems small the inducer measured 62mm and the exducer 46mm. Any info on what kind is...
Thank guys!! Also i have laying around a 10cm Turbine housing from a i think hahn S20G. What do you think that mated to my turbo? Would be an upgrade over the 8cm?
Hey Justin,guys!!I currently have a TD06H "20G" with a 35r compressor wheel, went on Tuesday to dyno it to see how much it makes. Final run was 500.3 at 31 pounds. I know that the 35r compressor wheel can handle that type of boost levels but how much can the TD06Hnturbine handle? Turbo is on...
Guys where i can find a restrictor for a Holset?? Can't seem to find any. The closest one i found was .060 but don't know if it work. Also Justin do you still sell the 90 degrees fittings that goes in the ofh?
Guys another question, how this turbo with almost a 35r compressor wheel and a Stage 5 turbine wheel came from pte in a .63 turbine housing? Is the 61.3 compressor wheel to big for a .63 housing and even on a stage 5 shaft?
Hey Justin i came across this turbo today but didn't find anything in specific on what she is. Is a Precision Turbo and it has this marked on the tip of the compressor 400-6162s. Also guy gift it to me because it apparently chew something and the turbine side is chewed up. Here some pics:
Justin does all small 16G's come with 7cm housings?? I ask this because i have bought 2 separate small 16g on 2 different ocassions and both came the the 6cm housings
No im just changing the headgasket and putting arp headstuds on it.Block looks firm and pistons too.Before the head gasket blow i did take the conpression and it did 160 all across.So block must be in good health
Hey guys im in the middle of changing my headgasket and putting arp headstuds to my 1gb daily driver.Once i take out the head found that the engine had this pistons installed but they dont have any marking on them and looked aftermarket.Here's a pic:
Guys i have this weird turbine housing that came with a regular td06 20g turbo i got in a trade, but im trying to figure out of what it came from.I think is an 8cm housing but where the wheel runs seems bigger for the standard TD06 turbine wheel.It's all DSM flanged but i dont know what to do...