....

I bought all my fuel line off summit.

Its a mishimoto fan shroud with mishimoto fans.

Here is a little update I haven't had much time to work on the car due to work. But I got my rear brakes on and started messing around with the bumper. Finished my fuel line setup, wiring and some other little things.

Hey guys,I need a base map to get my car started, so I can move it on and off the trailer. I'm sure someone out there is running a similar setup, so if you could post up, that'd be awesome!Pertinent mods are; AEM V1, FIC 2150's, FP @ 43.5, AEM 5 bar map sensor.The car will be...

For the t-case Contact: Jacks Transmissions LLC — Welcome I think it was 450. For the brakes Contact: The Brake Man.com - Home 2100-fronts 1600-rears and yes they have them for the 1gIts never ends so plan on spending some money and time on your car this build has taken me 3 yrs due...

I ordered shell urt advanced Research Octane no.115 Motor Octane no.105 around 700 shipped for 55gal

They weren't bad kind of a pain in the ass. It's just because of how stiff they are nothing to be afraid of. They really stiffin up the motor deffinitly worth taking the time to install them.

$215.00

It has been awhile since I have got on here but heres a little update. My tank finally came in from frontline fab and catch can. Tank is -10 feed -8 return so fuel wont be a problem. I am going to be doing a 10pt cage and a full aluminum exhaust soon. 2150cc injectors came in and I just order an...

Well I had my interior almost completed. Then I started talking to cory at bbfab and decided to send my harness to him to be stripped down. I would rather not deal with the headache and take the time do it. Sadly I don't have a welder so I brought part of my exhaust to my buddy's house and got...

I will be at ne dragway as much as I can. My buddy I work with has a dr750 vr4 he built over the winter youll see us trying to run each other off the track haha.I am building my exhaust today here are some pictures of it before.

Yes I will be making videos and traveling to every event I can make it to also. I have some more parts to order and I am hoping to be done by april. :pray:. Well anyways here are some more pictures of some little things I have been doing and new parts that have come in.

No E85 around where I live it blows big time. I'm going to go broke spending all my money on race gas. Tough life haha

I sent the injectors back today after deciding the fuel I am going to be running. I got the 1850's because of the oxygenated gas issue with the high z injectors. I found Shell urt advanced race gas unleaded(ordered a 55gal drum), so now I am going to run the high z 2150's should be here by the...

Most of the parts I ordered have arrived getting excited for spring hopefully everything will be done in time for april 1st opening day. Waiting on my tank and I also need to find a fwd fuel pump hanger to use as a gauge.

I was going to but the wire casing is old and brittle. It will crack if I bend the wires around. :nono:

Alright well tonight I broke down and spend some more money on this gold digging bi*** I call my car. Ordered my entire new fuel setup dual Bosch 044 pumps, Russell pro classic nylon hose, AN fittings, FIC 1850cc injectors, Fuel lab FPR, Dual Fuel lab filters, Frontline Fab tank.Here are some...

Nice fab work, cool build.

This car is going to be factory new when your done with it. Looking purrrrrrdy!

Great build! Keep it up.

Yeah I dont love it either :ohdamn:. I did it when I first got the car and now way to lazy to change it. I'm ready to beat the hell out of this thing! I will change it when I have to pull my motor again.:thumb:

Hahaha your such a sarcastic prick. Did you get picked on when you were younger? Just kidding.

Yeah I always tell my parents if I didn't spend it on my car I would just have more money to drink, and nothing to show for It.

I will always stay 5spd and that clutch was $1300. I don't really have a lot of money just an addiction haha

New ClutchDid some wire hiding/clean up tonight

Rims came out really good nice work!

Car looks awesome keep it up!

Alright shut up with the bullshit!!!!!

Haha how do you look in a skirt....?:sneaky:

No you don't at all haha. You just said what I was thinking. People are corny, because they don't cost $1,000 a seat they suck? I got both of them for real cheap not to worried about it. Bride is a legal manufacturer in Canada also so they arnt really fake. Just not the japanese expensive ones...

Haha they are fake. You guys are good. I'm going to get one bucket sparco or something to race with.

Thanks buddy I appreciate it! Your build looks damn good yourself. The wheels are 17x8 Tires are 245/45/17

What makes you think the brides are fake?? I'm confused why you would assume that?I went with a cheaper manifold because I want to get my car running, and I plan on building my own sometime soon. I thought it was a waste to buy a really nice one if I want to build my own.

I didn't do anything with the with the camber just slammed it to see what it would look like haha. As far as the abs delete kit goes, yeah its pretty lame! Its made for a 3000gt so the lines are real long. It was very easy to install.I have those clear lights just sitting in my garage if...

I didn't have much time earlier to post up everything I wanted, so here is the rest.I finally got the motor back in.Also got the trans in.I ordered some bride seats.Hallman boost controller.Cleaned up and painted my shifter assembly.EDM taillights and EDM folding mirrors...

Hey guys its been awhile. Thought I would post up some of the things I have been doing. My old dash has some blemishes on it, so I bought a new one. I stripped the new dash down pulling all the wiring out and the vent tubing. While it was out I stripped the firewall of the sound deadening...

Snow+Salt=Rust

I got the lug nuts from a friends shop in vegas acme two motorsports let me know if you guys need anything I can get stuff cheap! :thumb:

Just got home from work and inspected the weld nothing is wrong with it, its just the picture you had me scared there for a second thanks for pointing it out though...Just purchased AEM ems.

They are Tein hood dampeners. :hellyeah:

Well I got the tires mounted today. Had to go to 5 different tire places, nobody would touch them "to much of a liability" sounds stupid to me! Also my new brake man brake kit came in looks awesome cant wait to put these master pieces to work at the track! heres some pictures....

Well today the man in brown showed up with a little something for me, got some new purple nrg lug nuts and nitto nt555r Drag Radials

Good stuff get some better tires on those beasts... Got to nail that 60ft!

Looks awesome keep the pictures coming.

what was the 60ft?

Build a tubular front end!

Haha, Yeah having a lift at home is a nice feature. I'll post more updates soon brakes should be here Thursday!

Sent out my transfercase to Jack's Transmission in Colorado for a fresh rebuild.And then the new wheels and wheel studs arrived. Enkei RPF1's 17x8 +45, and ARP wheel studs. Just waiting for my Nitto 555R DR's to arrive so I can get them mounted.

Cleaned out the garage and freshened up the floor.Fresh OEM front axles (with lifetime warranty), DSM Graveyard Stage 2 Hardened Rear Axles, new Hubs all around..Dropped the rear subframe to install solid subframe bushings and hardened poly rear diff bushings...