The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support ExtremePSI

Search results for query: *

  1. MotoEclipse

    more steering angle?

    The tranny was on the way out before I even started this, I'm honestly not too worried about it. This car is my play car if it breaks it breaks.
  2. MotoEclipse

    more steering angle?

    As of right now my buddy and I are just ripping out the front drive shafts to play with it, I have the tranny for the swap im just waiting for the money for the driveshaft and mounts and everything. the center and rear diff are both welded.Im testing the waters for the rear axles for my...
  3. MotoEclipse

    more steering angle?

    Hey guys I'm right in the middle of converting my car into a drift car, and I was wondering if anyone knew how to get more steering angle? I wont be messing around with the steering for awhile but I want to start planing for it now. any help is appreciated.
  4. MotoEclipse

    problem with 02 after doing 2G maf install.

    I found the problem, I forgot to change back over the MAF signal to 1G lol. Thanks
  5. MotoEclipse

    problem with 02 after doing 2G maf install.

    So I wired up the 2G MAF, all the wiring was fine, I started it up and got 025 code for the barometer malfunction. I checked my wires 5 times. they were all done correctly, I checked the soldering connections they were fine. SO I went for a drive around the block and I realized that my wideband...
  6. MotoEclipse

    oil pump pully oil leak...

    Granted this is a cheap oil pump, if this problem continues im just replacing the pump with a good one. I was just wondering if anyone else has ever had this problem?But the weird thing about the seal is, you need to take a socket and tap it in just like any other seal would need, the seal...
  7. MotoEclipse

    oil pump pully oil leak...

    I didnt hammer the metal till this last time, the seal was original with the pump, came pre-installed. the seal came out on it own with out any damage to the pump.
  8. MotoEclipse

    oil pump pully oil leak...

    Has anyone ever had this issue where the seal behind the oil pump pully will not stay in?? it is a pretty major oil leak and i've taken the front of the motor apart 3 times and it came out again with 2 miles.... I even hammered the metal around the seal to make a lip to keep the seal in, but it...
  9. MotoEclipse

    Car is stuck in open loop (log attached)

    My car is stuck in open loop and i cannot figure it out, it is just dumping fuel, anyone have any ideas?**THIS IS A DOUBLE POST IGNORE THIS**
  10. MotoEclipse

    my car imeediatly revs to 4500k on startup.

    Found the problem, the intake manifold had a crack on the bottom of the mani. I have no idea how it happened but yeah.. lol
  11. MotoEclipse

    Car is stuck in open loop (log attached)

    I cannot figure out why my car is stuck in open loop, can anyone see why? granted this is with me driving it around too with no change. It is just dumping fuel. all the wideband wires are fine and everything.
  12. MotoEclipse

    my car imeediatly revs to 4500k on startup.

    I just went out and double checked the vacuum hoses including the brake booster. they are all on.I'm not sure if its only on cold starts ups since I didn't let it run for more than 2 secs at 4.5k rpms. this is a fresh rebuild on 0 miles.
  13. MotoEclipse

    my car imeediatly revs to 4500k on startup.

    I cannot figure it out. what would be some culprits to extremely high rev on startup. This is a brand new motor with 0 miles on it. and I don't want to keep starting it like this. I have no vacuum leaks. or boost leaks. my tps is at .63.......is there anyway in ecmlink to adjust cold idle?
  14. MotoEclipse

    connecting rod bearings

    Hi, So I am currently enlarging my main bearing's holes in the attempt for the holes in the block to line up correctly. I have the issue with 20% of the hole blocked. And I had a question about the rod bearings holes. the oiling holes are extremely tiny, and I'm wondering if anyone has ever...
  15. MotoEclipse

    Does anyone know where i can purchase .040 over rings?

    Well shoot. that makes perfect sense.. at least im on the right issue lol. my car defiantly needs rings.
  16. MotoEclipse

    Does anyone know where i can purchase .040 over rings?

    they are 1995 pistons. they are the nippon racing ones off ebay.If one of my oil squirters were pointed wrong, and on the cylinder wall, would it be possible they are shoving oil up into the top of the piston? cause this is my whole problem, it smokes but only under easy driving, and idling...
  17. MotoEclipse

    Does anyone know where i can purchase .040 over rings?

    I realize that i used 1g piston rings on 2g pistons.. is the ring height different from 1g to 2g?
  18. MotoEclipse

    Does anyone know where i can purchase .040 over rings?

    like the title says, i need to re-ring my car, and im having a Huge problem finding rings for my.o40 over... the pistons are 2g 8.5.1 comp.
  19. MotoEclipse

    Starting issues - No / Doesn't / Won't Start - MERGED

    the only thing i could think of is, the valves aren't seating properly, or your timing is off. did you make sure the dow marks on the cams were facing up when you put the belt on?and yes, the rollers should be touching the valves at all times. if they aren't you got bent valves! ive been...
  20. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    i rebuilt the turbo cause i was ignorant, and didn't know. but i do now. and ive already got a oil catch can. when i put the motor together again, it got brand new ARP everything. and a all new gasket kit. i threw on a buddies 14b, and it ran like a champ, absoltuly now oil. so it 100% the...
  21. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    at the time it never crossed my mind. since this ive driven it several times. it only smokes once i get into boost, so im pretty damn sure its the turbo. regular driving doesnt smoke at all.
  22. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    how was there pricing? cause i can pick up another 14b that runs without any problems for $115.
  23. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    on a fresh motor, ive only put the best filters i can get on this thing, along with good oil. i don't think it's an oil contamination honestly, i was very very anal about keeping it clean when i was building it, and after. i dont think a fresh motor would be that dirty either. after all this...
  24. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    So then safe to say the turbo is done?
  25. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    then maybe it is the turbo. i already ported the relief port for the oil. when the turbo blew it had about 1/4 inch of play. it was a lot
  26. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    Yeah i broke it in properly. though the pistons were out after the break in. i wonder if it does need a re-ring/hone.. an oil squirter broke and i had to take the crank/pistons out to get to it. i marked where the rings were loactated, and how they came out, and put them back in the same way..
  27. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    when i get off work tomorrow, ill recheck everything again, and check the pipes for oil.i appreciate you guys helping as much as you can.
  28. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    I cant drive it, cause anything harder than "grandma driving" throttle makes it smoke. ive already been pulled over once for excessive smoking.Ive never been so lost on a problem like this :/
  29. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    it smokes a little at start up, then stops. i start driving, and imbetween shifts it puffs, then when the motor starts making more than 10 vacuum, it all goes to hell. is it possible for a turbo with 5 miles to already go bad? i just dropped $110 for the kit..
  30. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    14B turbo, when all this happened i was running 15psi. my wideband was at 11.4 when it started the inital burning. the motor has a brand new PCV valve. but ill check it again, and ill drain my intercooler too. its dark now so i wont be able to do it till tomorrow.im bruning oil pretty...
  31. MotoEclipse

    Impossible to fix blue smoke. Massive amounts.

    OK. so i have over 4,000 in this car. including a full motor rebuild, Brand new turbo rebuild with maybe 10 miles on it. brand new valve seals with maybe 5 miles on it. 176 compression across the board. heres the story.my car ran great when it was an auto. no smoke. no nothing, the auto went...
  32. MotoEclipse

    Starting issues - No / Doesn't / Won't Start - MERGED

    yeah, the motor only has 5,600 miles on the rebuild. i have 176 across the board. and i have good spark.. :hmm:i found the problem.when i was tightening the MAF, it slipped off somehow.
  33. MotoEclipse

    Starting issues - No / Doesn't / Won't Start - MERGED

    MOV01896 - YouTubeAfter i got my turbo back on my car. i had this issue. i can hear the fuel pump turning on, ive checked everything 4 times. there is nothing out of the ordinary. it ran perfect before i took the turbo off. not nothing. (the original fuel pump is still in the car)...
  34. MotoEclipse

    1G Broken oil squirter, replace with a Evo 8/9 squirter?

    i ended up getting mine re-brazed. worked great. Thanks for the answers.
  35. MotoEclipse

    1G Broken oil squirter, replace with a Evo 8/9 squirter?

    Can I replace my 1g oil squirters with a Evo 8/9 squirter? they look the same. I can't find any 1g squirters, my whole build came to a halt because one just broke.Thanks, Ethan
  36. MotoEclipse

    bad situation with my DSM.. Lost..

    when i blew up a turbo on my old probe. (water/oil cooled) it puked white smoke like mother. very likely it punched a hole, and coolant is getting into the exhaust. :) it was a blast when i blew mine. i literally burned off ALL my coolant within about 50 secs lol. good thing i was close to home..
  37. MotoEclipse

    wideband O2 sensor acting up? attached log

    i dont have 850s in the other post, he read my wishlist. i still have the stock auto 390's.im almost positive i have clogged fuel injectors. my outter cylinders are burning lean, and my middles are rich.
  38. MotoEclipse

    clutch dragging still after adjusting everything.

    yeah. i was careful not to burn up the nylon washer. but i put a nice thick, weld on it. it shouldn't break anytime soon lol. and ya, it was an awkward weld job lol.alot of un-orthodox welding angles haha
  39. MotoEclipse

    clutch dragging still after adjusting everything.

    I got the problem fixed. i took the clutch pedal out, and found out it had major play. so i welded the bracket, and got rid of the slop. and boom. everything is 100% now. :hellyeah: god it feels good to finally speed shift. lol. this is the first time i actually got to really drive my car since...
  40. MotoEclipse

    clutch dragging still after adjusting everything.

    its a ACT pressure place with a stock mits clutch.ive already shimmed the pivot ball so the fork is sitting more towards the slave.and ill have to check on that pedal. < what will i have to do if my pedal is bad? :(
  41. MotoEclipse

    clutch dragging still after adjusting everything.

    ok. so i know this is a dragging clutch. EVERY gear is a bi*** to get into. over half the time it will grind. ive replaced the slave cylinder and master cylinder with dsmgraveyard's parts. (equal) ive adjusted the rod on the pedal like jakcs transmissions. and ive bled the living hell outta my...
  42. MotoEclipse

    gas pouring out my muffler? good lord.

    ok. ill start looking for one.F***!! this is getting ridiculous. i did the plugs. it ran a tiny bit better. as soon as i got it past 3k rpms. it just fell on its face. sputtering horribly. i cant go past %30 throttle or it just starts to sputter. and the wideband is still everywhere. when i...
  43. MotoEclipse

    gas pouring out my muffler? good lord.

    Yea i have a spare. im ordering this FPR tomorrow.ADJUSTABLE BLUE FUEL PRESSURE REGULATOR/FPR+GAUGE+HOSE | eBayits cheap. but it will work.
  44. MotoEclipse

    gas pouring out my muffler? good lord.

    yea the vac line is right off the intake.ive ran the simulated o2 4 months before i took the motor out for the swap, and it never had a hiccup. and i never changed it since.
  45. MotoEclipse

    gas pouring out my muffler? good lord.

    no not yet. its running on the stock fpr
  46. MotoEclipse

    gas pouring out my muffler? good lord.

    ok cool. then ill save my money. lol. yea i just re-set it to 5 degress before.yeah because i had the car running with the simulation wideband for 4 months without any issues. and i never changed any of it when i put the motor back in.
  47. MotoEclipse

    gas pouring out my muffler? good lord.

    i have the stock 390's the 850's were on my wishlist lol.and i dont get payed till tomorrow so i decided to post all this to see if anyone may have had the same situation. im buying NGK iridiums tomorrow
  48. MotoEclipse

    gas pouring out my muffler? good lord.

    Ok. So i got my auto - 5 speed swap in. car runs like complete shit. i got the wideband re-calibrated. didn't help a bit. it idles like crap. and the wideband is EVERYWHERE. im possibly thinking the plugs are completely shot? or if somehow the injectors are flooding my car? lol i have no idea...
  49. MotoEclipse

    Mitsubishi Galant MAF

    Right on! Thanks guys
  50. MotoEclipse

    wideband O2 sensor acting up? attached log

    yea simulating. i have had the wideband in the car running good for about 4 months before the car was down due to tranny problems. so i know it had a good history. ill re-calibrate the lc1 tomorrow. and run a BLTOk i ran a BLT, and i had no leaks. i also re calibrated my wideband, along with...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top