Alright ill work on that next! ;) thanks.

Alright any helpful tips, I haven't tuned it myself on SD, took it to my tuner for that, but i did tune my MAF before I did the SD swap.

yes i did, i though i had posted after i did, but here is a log from just some idling, i think i need to adjust my idle screw, i was playing with it before and not sure if i got it set back to where it was.Never got attached cause the file was too big, but here is a cruise log i took split...

Car starts and ran for a minute, i shut it off tho cause timing needs to be adjusted now, then i should be set to go.Here is a short idle log at temp. About to go out and get her broken in here in a few.

motor has not been broke in yet, just trying to get it started so i can break it in. fixed the harness and am going out now to plug it in and see if it works.

Ok, missing airflow signal was because the pink wire come out of the plug on the SD harness cable. How do i pull the pins out on this to get it back in? and the global settings I have on there or the ones that had been given to and helped me when i first got them through the link site. Also...

the latest log was done using 91 oct, and yes the map sensor is hooked up properly, i will check it again and maybe see if it is set up right in link as well as far as inputs.

Also, WB reads 19.7-20+ when i have it running by feathering the throttle.

here is a new log, this time i put 91 oct fuel in it, wont idle on its own yet, but if i feather it it will stay running.

dont got a MAF anymore, or else i would have started there, but gofer, here is another log after the fact of the changes you suggested, still no start, closer tho.

I'll load this to the comp and adjust the settings, and report back with what i find out.

Hello, I am having trouble getting my car to start. It is running on e85 and SD. It recently got a rebuild in AZ but engine didn't go in I got to Oklahoma. nothing about the setup changed. The car was originally tuned in phoenix. I need help configuring the tune to start in the cold, so for...

I'm about done with my car, and once broken in then I'll be over in okc a lot to see my gf.

Haha of course it happens like this, I just bought one and just got the engine in last night. And I just moved here lol

That is too far me to go right now. and dont have the time to wait for it in the mail really :S

Hey guys, just finishing shit up with my car and I need that half moon piece, the engine builder tossed mine for some reason, dont matter if it is metal or not, just need the piece please!! Preferably deliver since I wont be quite done with my car. I may be able to get a ride to you depending...

Ya, i am trying, thats the only thing i need, i am trying a couple other forums i am on as well to see if n e one else catches interest, which i hope cause i need my shit running again! lol i miss the vroooooooooommmpssshhhhh! :D

I have everything but the engine hoist and help, thanks for you guys coming out now, lol i am just so stressed and have a ton of stuff going on! lol I have everything but the hoist. If you guys are interested in helping please PM me too and ill get you my number! I would like to have this...

Come one guys, what is it with this region? no one like to help or meet up or what? dont mean to come off like a asshole, but i have made 2 or 3 different threads and multiple posts and hardly had any action, there has got to be more ppl willing to help...

No one? I got into OKC last night late and I dont leave till tomorrow morning for tulsa so if anyone here would like to help me out please speak now if your want to, ill supply beer and pizza.

Hey guys I am moving to Tulsa tonight, i leave tonight and will be there tomorrow, but I need someone with an engine hoist and a place to put my engine back in. I will be towing it on a uhaul, so i would be able to drop it off anywhere, just need some people and a place to help, ill provide...

So does anyone know places that give out free meals and a drink for your bday? And places to go that get a free drink on your bday?

Going to TWS. Start the 26th. And AZ is nice, but the heat is frying my brain right now lol, i know its the same in OK only more humid, but this place i need to get away from for many reasons lol. I want a winter house here though...that would be nice.

Ok guys, I am moving to Tulsa in about three weeks and need to get rid of my bed so i can afford to move down there. the bed itself is only 4 or 5 months old. Its an 18" deep Regular King size bed, comes with both box springs and the frame rails as well. I am looking to get 800 or so out of...

Ya, seems like not a lot of ppl in here, unless they are not on all the time or unfriendly? idk, hope some ppl chime in...

So nobody still? 3 weeks till i am there.

Congratulations man!

Where is the underhood pics man? lol

Go 3". you will not be dissappointed. 3" is perfect for our cars, especially if you feel the need (which you will) later to start upgrading other stuff, then it will help out even more, no sense in settling, your paying the bill, i think they are just not wanting to do 3", i have heard of...

Yes that will be ok, that is how i have all mine.

Ya acutally just happened to me. I lost 20 lbs in less than a few days... we hadnt broken up at the time, but she needed her space to think or w/e, and so i was getting driven insane, couldnt eat, couldnt sleep, couldnt do anything i loved to do cause all i would think about was that. Well...

Hey guys, I will be new to the area in about a month. I will be in Tulsa, but will be traveling to OKC frequently for a friend too. Hope to meet some of you, I also have a thread going for an intro lolhttp://www.dsmtuners.com/forums/midwest-region-dsm/410659-hello-tulsa.html#post152686004

Haha, pm'd a mod to change the title lol, ill check that thread out.

Yes, the metal line is to the filter. And you can remove the vent, but it isnt recommended to let the vapors vent to the engine bay.

Haha, well i will be visiting OKC alot too, i got a friend down there, so i guess i shoulda said Tulsa/OKC lol

Hey guys, still for sale, price is lowered though I am askign 3500 but for you guys on here 3000 will take it easy. I am moving in a month so i need to sell this cause i cant take it with me, and i need the money to fix the car and for the move! please help me out guys, if nobody wants it here...

Nobody yet? Ppl out here not friendly or what? lol well looks like you may get a dose of me sooner than you think. I may be there in a month!

Haha ^^

According to them its a knock off. but I and a few other members have took them apart, and they look to have the same diaphragm in them as the NGR type s bov's that are better then the greddy ones.

Not going to lie, that's really clean...

Well it is for sure that i will be coming there to Tulsa.

Hey guys, my name is Jesse, I am thinking bout coming to Tulsa to go to TWS. I am currently in Phoenix, AZ attending UTI. Just wanted to kinda introduce myself here and get a few connections around the area. If I do end up coming it will be in Jan. I graduate here in December and my lease is...

like the title states, im in the market for some evo pistons and some 1g rods. if n e one gots some let me know

Haha where is the like button for that! ^ lol i got a couple stock o2 housings if that is the problem.

The relay for a/c that is different from all the rest of the relays, and when you finally locate it after 5 different dealers, you find out that it is a discontinued part...

I found one in the list called Loudtronix.me that seems to be working well, it puts buttons on the youtube page for videos under the video box that says Download MP3 or Download Video. So far seems good and they work with my Itunes too

Its definantly something different...and does kinda look like a ufo...

Hey guys, i was looking at plugins and addons for firefox and someone was telling me there was one that you could convert youtube vids and stuff to mp3 files or soemthing, anybody know of one like this or somethign similar?

Haha that shit is funny! Very true though!

not to bad. got a chuckle or two lol