To me if I am reading your post right is sounds like there is a short or grounding issue somewhere. check every wire that may be near a moving part and make sure nothing is touching a ground source.

At least valve replacement is not that hard to do. Good luck. I cant wait to get another DSM!

Really good look do you have any plans of spitting the fronts so that the front bumper may be removed without removing the flares too?

Maintinence before you do any upgrades.DSM 4G63 Maintenance Guide - DSMtuners Tech Guide: 1G 4G63t Upgrades - DSMtuners If you follow these then you cant go wrong! Good luck and keep updating start a thread on your maintinence, take pics and then add your upgrades to it take pics lots of ppl...

Thumbs up! looks good.

Maybe try recirculating that bov valve too on a stock set up the bov should be recirculated.

Well there has been a lot of good advise on this thread so, I will just say good luck OP. IF it is MKC, I Hope it works out in your favor.

^ Wouldnt pushing it to that level, potentialy be catostrophic to the turbo, if sustained at that level (in most cases)?

Good stuff bro! Keep it up!

You know, You cant go wrong with some EVO 8-9 wheels, I had mine wrapped in 235/45/17's and it looked sick. But if I were to choose from the selection you have posted it would be those VOLK's, for sure. Those are just pure sexy, And If they are going on the car in your avatar then i think they...

Ok so I am deployed right now and My tour is almost up. I have been saving all year to buy and EVO, But My wife is a full time student and she is wanting to be a physical therapist the classes she has to take are at the very least an hour each way for her drive, we currently have a 2012 maxima...

are there any mods done to this car? I had a huge problem with mine doing a lot of what yours is doing. and went through a lot of money trying to figure it out. I had a EVOIII16g on mine and exhaust and some valve work done. Anyway got it hooked up to the computer and it was running EXTREMELY...

+1 on Punishment or VRSF. although I even hd to do a little dremmel'ing to get the bolts to sit flush on the j-pipe for both of my Punishment kits, but still worth it and there were no ther fitment issues either.Also, My Talon had a godspeed kit on it as well, but! I also had a t-25 at the...

Recirc, o2. the open dump that i had ws obnoxiously loud, lol quieter is better lol (unless RaceCar) haha.

OP, do you have any updates on your issue?

OK just wondering cause the Red that was on my buddies evo seemed like it would do very well and I had just wondered If they might be the same. thanks though:D

Since I am not in the know on tech specs, I want to ask, What do you guys think of the the FP old school red if i remember correctly, becuase I read it about 2 weeks ago, it said it was a direct bolt DSM frame made FP red, My plan was to build a road course or time attack next summer. what are...

For you and the OP, and the other few who are having cooling issues. When looking at your mods I dont see any Logging, or tuning solutions in your profiles. WB o2, Datalogger, and tuning solutions are a must when adding upgrded Turbo, injectors, ect. a GM MAF and MAFT, are not going to be...

^ this made me LMAO! To the O.P. good luck with your build.

Just a quick ? becuase i had a very similar problem what does your wide band read when you are driving? Reason I ask is becuase I also had an alum. rad. and slim fans, they kicked on correctly and everything but when I was driving the car would over heat. couldnt figure out why. spent countless...

you gan google boost leak tester they are fairly cheap and extremely easy to use, once you use your BLT. if used correctly you should know if your couplings are bad.

This is a topic that alot of ppl, may disagree on just from experiences. I myself would use a AFPR, at least some EVOVIII injectors, (560cc or better). it is not going to be cheap, I had my 450s maxed out at around 130% it was insane. They couldnt keep up with the 16g at 16psi. I was also...

Sorry I edited my Post becuase I failed to read everything wand what I had suggested was already suggested and replied too, any way I hope you get the porblem solved man, GL.

1st, this question has been posted, many times before. there should be some type of Manual Boost Controller, it your boost level is at 24psi. Might wanna check that out. Maybe take some pic's of your engine bay (detailed pic's), also of any modifications that look more than stock. I bet there...

lol it is a pain in the rear but you gotta manuver it i dropped the front roll stop bar to get the rear on and then put the front one up after.

JL, or MTX is the only way to go really and JL amp, and Rockford amps are under rated as to what they really put out, also if you really want a clean sound a head unit(radio) that has 5v pre outs or better with front rear and sub on seperate preouts Kenwood radios are my favorite brand for head...

go to oriley's or autozone, or take it to someone who is near you get a compression test and leak down test done to rule out the head gasket, that is a very clean looking car. I know they are expensive, if the turbo ends up being the bad part let me know, pm i have a 14b in perfect shape, and a...

At least they were still in one peice when I took mine apart they were in chunks.

A Spyder model, is a convertable. GSX is a 4g63 turbo powered All Wheel Drive, and the GST is the 4g63 turbo powered Front Wheel Drive.Good choice on finding an all wheel drive, if you go talon, the TSI is the 4g63turbo powered version but there is no designator to wheather it will be front...

read the upgrade path and understand it, then start your upgrades. dont jump ahead to far, because you COULD not will but could run into problems and then you will be taking 2 steps back. these upgrade paths were writen by guys who have been in the dsm scene for a LONG time.

+2:thumb:OP: just know I have done a lot of incredibly stupid things with my dsm's as well as asked some very stupid ?'s that I maybe should have though about before asking them. but hey you live and you learn right. if you are going to replace the stock t-25 with another one just remember...

(enk9) tsi4g63awdit is in all CAPs

lol that sounds good i think i will add all this info to my sig as well as how many times i have been married, the date in which i joined the army, and how many children i plan to have!:thumb:ROFL, JK but hey I still am going to get an EVO! and will probably not use their forums and just...

herp maybe? ROFL just kidding it was open:tease:

this is the one i want!

i hate ppl like that, that should be a crime.

anyone notice how the OP has not commented since the first page, i do believe that everyone made their point lol.

so glad i read this thread:rocks:

wish i coul have been there, maybe i will make the 2013 shoot out lol i wont even be in the us in 2012

as for where to get your engine built, that is on you, if you do not have the mechanical know how to do it your self you are going to have to research your surrounding area and find the right place.sounds like you have a nice list of bolt on mods, but if your engine is seized or ready to...

jeez bro I could only wish for a car with that much attn. to detail, i guess if I had time, I could do something along those lines, but I am a very impatient man, you sir did a very nice job. :hellyeah:

Nice clean looking car bro, A buddy of mine had an rx8 about a year ago until his unskilled driving self went sidways in some gravle and procedded to drift his car into some rebar from a construction site.but anywho dont really know what your plans are for it sounds to me like it is your dd...

any t stat from autozone or orileys is going to be motorad brand so it dont matter, go to the dealership and order a mitsubishi t stat it is like 15 dollars.

Awesome program growing here, I would love to contribute i have a nice little box of used parts that i can throw in when ever you guys get your reginal hubs on line let me know and i will get them there, hopefully soon cause i deploy in a couple months.great idea from DSM community members.

i say that 400 at the stealership is pushing th limits of what that should cost. do it your self it is not hard, get a chilltins and do it yourself.

ppl like her and her family make me uneasy to say the least. you definatly need to find a lawyer and get that child out of that situation and get him into a stable environment, FIND A LAWYER fast!

congrats:thumb:

sounds like an extra oil feed line i had one coming from my oil filter housing as well when i had my t4 on my talon find a plug bolt take that line out and put in the plug bolt, use some thread tape. and you should be done with that extra line.does that line spit out oil when the car is...

they did I live off post, and my working dog is a mutt so they just call him a lab but you can see it in him.

hey bro Pit bulls are terriers just so you know, their correct name is staffordshire terriers. dont know if anyone here knows it but the dong that was named petey in the little rascles was a pitbull, american pitbull terriers come from a combination of english and Irish bull terriers, and...