Thanks everyone for the help got everything pretty much dialed in and WB o2 is logging properly now. Few issues I was causing and this was just a base tune so I went it back out to get re adjusted and then go from there!

So I just went out and cleared everything and started over this is what the log gave me now. Thing looks much better so I must have mixed something up at one point. Now my only issue is I cant seem to get my AEM wideband to properly log. Its there in the log but not recording the values...

Okay I just checked on my compute that the logs and info there is not actually the tune so it looks like I either installed them wrong or accidentally deleted them. Im going to clear link and re load them up here in a little and see what I can come up with

Maybe I didnt load the tunes in correctly? I have never used link before and read over everything so I very well could have over looked something. But I had tunes sent over to me, I know the guy that did them and not worried there its probably something I mixed up with the tune or didnt do...

Any one able to check the tune over to give the okay just to make sure its good? Also pulled all the plugs this morning all white to the whole system is running lean not just 1 injectors so either something timing related tune or fuel pressure

Not yet I just bought one should ne here by Tuesday ill toss that on an see what I get there also

Yeah mine like that now all the time idle and moving. Some days though ill start it and it will idle perfectly at 14.7 but then I shut it off and turn it back on and its back to lean. Might actually have a fuel pump going out? Never considered that but just thought of that talking this out

Its honestly running lean enough (17 to off the gauge) so it very well could be they did sit for about a month in the car while I dealt with other stuff, Ive seen stranger things happen.As for your injector you should be fine, I usually leave mine in marvel mystery oil if I know they are going...

I actually rebuild injectors for a living so I just went over them and flow matched them when I installed them. Ill check them again just for the heck of it, they way this car has been it wont hurt, trying to check and double check everything so ill do that this afternoon!I would think that...

Its ran lean since I started it back up from the build. It ran a little lean on start up before the tear down but after I reved it up to like 2k rpm it cam out of it and ran fine. Here is the log plus the 2 files for my starting tune. I did change it and have the WB set up and on the data screen...

Hey everyone I am having an issue with the 2g GSX after a motor rebuild (new HG and just went over it to take care of leaks ect). I am running super lean at idle after getting it going and after the tune and when driving (didnt drive far). I know I am over looking something obvious but I am...

I have a few sets of injectors that have been sitting around I was going to use for a few projects but I clearly am not going to get to them the rate im going now.Delphi 680cc injectors (2 sets available) 125$ shippedDelphi / Rochester 1000cc 170$ ShippedDelphi 525cc 80$ ShippedRC PL4...

I have a few sets of injectors that have been sitting around I was going to use for a few projects but I clearly am not going to get to them the rate im going now.Delphi 680cc injectors (2 sets available) 125$ shippedDelphi 525cc 80$ ShippedRC PL4 750cc (from evo 8) 150$ ShippedI have...

Just finishing this off here. I finally got a check engine light to come on after about 600 miles of this! Turns out it was the upstream o2 sensor was being a little funky. Should have the new on here in a day or 2 and will be good to go!

I have to check on the fuel pressure, that actually kinda seem like the issue. If I rev it around 2000 rpm its usually come out of it then once driving its gone. ill have to check that when i head to the post office later.Also no check engine light. I have driven it about 250 miles so if it...

Im from New England so temps can be 20 at night and get in to the 70s during the day right now so wanted to make sure that was clear lol

Cold as in only if the car hasnt been started that day, outside temperature doesnt seem to have an affect on it yet. Once I drive it during the day and come back out to drive it its fine

I just got done getting my 2g gsx ready for inspection, Replaced o2 sensors, did new hard IC pipe, fixed an exhaust leak and rebuilt the 14b on the car, Nothing else has changed with it and only had bolt ons right now. I drove it 200ish miles after all of this was done with no issues, now when I...

Is there any fix to this or should i just get a new ECU?

I have a 2g eprom ecu with dsm link v2 that wont pulse my injectors for some reason, everything else that I can test with out the car running seems to work fine. I took another eprom ECU out of my buddies car and put my chip in it and it started and ran the car fine..Do you guys know if this...

I'm posting this up for my neighbor, he's come on hard times so he has to get rid of her. Hes open to offers but needs cash.https://nh.craigslist.org/cto/4945757560.html

Im parting out my 97 GSX so my buddy can use the shell to finish his build. Everything needs to go besides the shell, Hood and hatch. Anything else is up for grabs. Almost everything is still on the car so it may be a day or 2 to get the parts off depending what it is. Just post a reply here for...

Sorry for a late reply but in NH you should be fine as long as you dont have any CELs on. If you have DSMlink you should be able to get rid of everything that would cause any troubles

Im working on getting rid of a bunch of parts for 1g and 2g dsms that I dont have a use for in the near future. Ill list the few big parts I have but Ive got a ton of littles from cold air intakes, to turbo parts, to engine components a good bunch of everything.1g radiator with fans 30$ good...

Yeah car has been sold for a while, no one wanted to drive all the way up north to pick her up but she ended up going to a good home.

Well here it goes up for one last time as a whole. If I dont get any interest she will be parted out once the snow starts to melt away.1997 Eclipse GSX - DSM Classifieds

You will have better luck asking in the Tri State Regional Forum where PA is.Tri State Region DSM - DSM Forums

Wow people flagged that fast haha I had it up for 5 minutes and its gone. Its located in Glen nh. Here is the tuners add1997 Eclipse GST SAVE IT! - DSM ClassifiedsNew CL ad http://nh.craigslist.org/cto/4350824701.html

I need to get rid of my gst now and if doesnt get sold with in the next week or so its going to the scrap yard which is sad because it is a good chassis and still can be made in to a great daily with a clean chassis.there is the add only 350$ that what I can get for scrap on it.1997...

Any one with basic photo shop skills wanna put a set of black 522s and 521s on it for me? If not ill make another post in the photo shop things for me section. Thanks for the input so far!

I forgot to add that it can shoot .223 and 5.56 and everything on the gun is Mil Spec. The gun is in great shape he is anal when taking care of things, ive both other things from him and they have been in amazing shape regardless of age. He said he would let it go to me for $850 so it seems like...

My buddy is coming home from overseas this weekend and I'm going over the pick up one of the AR-15 hes has so he can have the money to go buy a hunting riffle for down the road. My only problem is I am not to familiar with these type of guns as far as their worth. Its an AR-15, DPMS upper with a...

I'm looking to get a new set of rims this spring when my car comes out of hibernation. Ill be picking up a set of Tein SS coil overs from a friend in a few weeks to give it a little drop.Here's how its sits a year or so ago, the only thing appearance wise I have changed is a CF hood and...

This was me when I was 9, He was one of the main reasons I got in to cars in general, and eclipses, I always wanted to as good of a driver as he was even if it was based off of a movie.I went for something simple with the decal,"if speed kills me someday don't cry; because I was...

I will be sure to let you know VR4joeHere are the 2 official links in the classified section. Im moving on from both of my projects so I can make room for an Evo...1997 Eclipse GST - DSM Classifieds97 GSX For Sale "Racecarish" - DSM Classifieds

Im looking to move on from my 97 that I started to build for a racecar but have been really busy laity and havnt had time to work on it and with winter coming up I would like to see it go to someone that has a garage to finish it up. 113k on it very minimal rust, strut towers still in great...

Well I ended up going on to an audio forum for help. This is what has been ordered and ill relay any info just incase some one else is interested.2 Bic F12's Dayton Audio APA-150 Infinity Primus PL63BK FMOD Crossovers Various wires and connectors

Im looking to upgrade my home audio from the logitech z623 system to something much bigger. Trying to stay around 600$ and must have a sub woofer. I mostly listen to rap and hip hop so I want a system that can pump out a lot of bass. From a little research so far I have found 2 solid set ups...

Would let go for 1300$ if some one gets it by Friday I need money ASAP

Ive been working on bringing this car back from the dead but I had a huge financial issue come up so I need to part with this one way earlier than I would like. Make me a cash offer and it could be yours! Trying to move it with in the next 2 weeks but Im not going to just get rid of it for dirt...

I just hit you up!

Also would trade for an open dump 02 housing, a grey 2g hood, a j pipe to side mount from ETS, 2g awd coilovers or Aerocatch hood pins

I have a complete 7 bolt bottom end that spun a rod bearing, It might need a new crank or this one turned. 100$ picked upI also have a 1g awd 5 speed tranny 100$ picked up and I have the transfer case to match if for 50$ picked up. Not shipping any of these item sorryVRSF FMIC for a 2g...

Thank you!No Need to brag :pId take 400$ with any color/condition as a trade aslong as its not dented/rusted. For any one that is interested. I would be keeping the hood but I dont think aerocatch hood pins will cover up all the screw holes. :cry:

Im surprised you guys are shocked with the price. Ive seen the backs alone go for 200$ and a full set for 800$. I feel like 300$ and trade for greys is reasonable. And good luck with kirkey's, nothing more comfortable than some straight back aluminum seats for driving around town.And a set of...

Yeah I understand where you guys are coming from but I dont have to sell them. I figured I throw them up for someone that has to have them. The best I could do is 300$ and good greys in trade

Nah only for greys sorry. Tan Would look awkward with a grey and black interior!

I have a 2h ViS Oem style carbon fiber hood that I'm looking to see what I can get for it. I am looking for 400$ with trade for a good condition black hood. Not shippingI also have a set of good condition manual front seats from a 2g in black leather. I would let them go for 400$ with trade...

I was wondering if any one in NH or close to it in Maine have a complete running 7bolt or good condition 7bolt bottom end. I need one to finish up a car that has a spun rod bearing and destroyed the crank. I have a 6bolt bottom end that I am willing to put in for a partial trade depending on...

I would say one of your belts is either too tight or not tight enough. Check that first. Not your timing belt but one of the accessory belts.