The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

Search results for query: *

  1. jpmxrider489

    2G NDD tube front help

    Im having a hard time figuring out the north/southbar setup and how it it supposed to be based on his kit. The last 3 pics are from his sources. If you buy his tube front end, the front mount is on the lower tube. If you buy his subframe, the mount is on the north/south bar. It seems as if the...
  2. jpmxrider489

    ECMlink RPM Spike issue

    I went to start the car up with the nice weather (been regularly maintained in winter) and the car would crank and wouldn't start. I then continued to crank the car and get a CEL for a crank sensor. I cleared it and it would just come back after continued cranking.I replaced the sensor with a...
  3. jpmxrider489

    3d printer help (Ender 3 v2)

    Im hoping we have some 3d printer people on here. I have got the ender 3 v2 and cant get anything to adhere. I have got 3 things to actually print but even if I try to reprint the same thing that was successful, I cant pinpoint the cause of my issue. I have leveled it many times even right...
  4. jpmxrider489

    ECMlink boost control table and automatic trans

    I been trying to dial in the boost control table as I got my trans shifting better now via rpm. When I click the help icon, it says for autos, use the latest speed raw value. Am I supposed to change the gear ratio in the DA tab to match what latest speed is for the raw value? It seems like when...
  5. jpmxrider489

    2G Aftermarket transmission pan?

    Not sure if this is the correct spot for this. But doesn't anyone know of a aftermarket transmission pan that is still available? I heard of someone makes one, but not sure how to get a hold of him.
  6. jpmxrider489

    2G Help with als with auto trans

    I'm looking for some guidance on als/launching. The trans has kiggly front clutch and IPT end clutch. Also have fourced four valve body and TCU. I also have IPT converter in the car. I also still have the factory TCU. Ill upload 3 small logs of ALS attempts. I also tried settings in the one...
  7. jpmxrider489

    2G How to install a vacuum pump with DSMLink

    In this thread Ill show you how to install a vac pump. The reason you would do this is to help launches when your brakes cant hold you back. While sitting at the line with boost, there is no vacuum going to the booster. This is mainly for people with a auto trans.You will need wire, wire...
  8. jpmxrider489

    2G Fuel hanger identification

    I recently bought a extra hanger and I have never see this before previously. If someone can help me out here. Can I plug the hole? Use it for a larger feed/return? Then I can cap the oem feed. I just dont know how it would fit in tank. Mainly just need identification. I'm talking about the hole...
  9. jpmxrider489

    fuel pressure issue and car dies

    So I recently replaced my diaphragm in my regulator because it had a tear in it. I went to take the car out today everything was fine until I got on the highway with some boost. I would loose throttle response and thought the engine had died. I was able to get it home and looked at my log. I...
  10. jpmxrider489

    Using a 3g shifter with shift buttons

    I havent seen anyone talk about this. However if your using the 3g shifter, then this is a decent option to have. It doesn't change the way the shifter operates. Im assuming you have the working shifter installed already. If not here is a good thread that I followed...
  11. jpmxrider489

    2G Cranks but wont start up

    So my car was running fine for months now. I parked it outside and got to be 30 degrees out. The car sat for 2 nights. Meanwhile all winter parked in a 50 degree garage, it started once a week. Now I go to start it and it will crank and wont fire up. Normally I have hard starts but never like...
  12. jpmxrider489

    custom vband o2/downpipe fab advice

    I have been thinking about making a stainless downpipe/o2. My current one was mig welded and is cracked now. The exhaust is completely custom fitted up. So I had some questions regarding angles and stuff. When you guys are making pie cuts, at what degree are you using in order to make fit. I...
  13. jpmxrider489

    ECMlink Fuel pressure issue

    So I am having a weird issue involving my fuel pressure. If you look at my log, it seems the issue happens most of the time above 5k. My rev limit is 8500. I cant find out why the pressure would randomly drop. Most of the time at the end of the pull. Does this look like a misfire? I highly...
  14. jpmxrider489

    2G FWD fuel cell options with battery above the rear subframe?

    I need to replace my gas tank. I know there were companies that made fuel cells for 2gs. Does anyone know of a FWD fuel cell that is a bolt in option? Or could you modify a AWD fuel cell to bolt in a FWD. I know people mount a fuel cell where the spare tire sits but I really would like to use...
  15. jpmxrider489

    2G Turbo recommendation

    I am debating on switching turbos for the next season. I am currently on a 7 blade holset. I am looking for something that will achieve 600whp on e85. I cant see me wanting more than 700. However I dont want to be maxing the turbo out to achieve 600. I am hoping someone with experience with a...
  16. jpmxrider489

    2G Tire and wheel recommendations for brembos

    I am currently running 225/35/17 on my evo wheels. The car is lowered and has evo brembos on it. I am looking for rim recommendations. Not so much on how light they are but wheel/offset to clear my brembo brakes. The tires are Falken azenis. They were good with my 20g at the track but now I need...
  17. jpmxrider489

    FWD drag racing help

    So I got the car all together. Dyno my hx35 as you all know at 530 and everything I read this is easily a 11 second car but I cant even get into the 13s or 14s. I am now a manual. I am fwd. But i cant get traction at all. The tires are Falken Azenis r16+? But they are decent with low miles. So...
  18. jpmxrider489

    For Sale hx35 to hx40 trade?

    I have a hx35 7blade that in good shape. But didnt make enough power for me. It made 530. So Im hoping someone wants to trade turbos plus cash depending.
  19. jpmxrider489

    Holset backpressure

    I just got back from the dyno. And was told backpressre is the reason torque is dropping rapidly. So the turbo is a 7blade hx35 with a 16cm ported housing truly divided. How can someone solve back pressure?
  20. jpmxrider489

    Looking for fuel leak at high boost

    So I have a Wally 525,8an feed, 6an return, fic1600 hiz on e85.At idle I have no leaks anywhere. I did a boost leak test as mentioned in one of my other threads but tested to 30.My question is if linear fuel pressure is boost plus base, I'm seeing 70-80psi depending on how much boost I...
  21. jpmxrider489

    For Sale 7blade hx35 for trade only

    I have a 7 blade hx35 with a ported 12cm housing and a non ported 16cm divided housings. The 16 might be ported soon if I dont trade. I have ran 30 psi without issue.I am looking for something that is also divided and flows more than a hx35. Let me know what you have. I would be willing to...
  22. jpmxrider489

    Holset (7 blade hx35) turbing housings

    So i recently come to the conclusion that my divided 12cm housing was my restriction. I was only able to flow 45lb/min and after porting the housing, I noticed flowing 47, which is much lower from other peoples reports.So I have a divided 16cm housing that I plan on installing. Issues I ran...
  23. jpmxrider489

    2G Upgraded power steering lines and now runs hot

    I recently upgraded all my lines based on the thread linked below. I have both steering fittings on the rack that are -6. They route by the frame rail. I have the high pressure one going to the pump. Then the other one is going to the factory cooling loop and to the bottom port of the reservoir...
  24. jpmxrider489

    For Sale 2g fwd parts, Act, fidanza, 95 twisty, random

    I have some stuff for sale. I would really like to keep things as a extra but could use the money. All parts are from a 95 fwd unless said otherwise. Everything is best offer and pickup preferred since most items are large or heavy.5 speed tranny- Not sure of mileage. But i only raced a...
  25. jpmxrider489

    2G 6 bolt auto trans in a 2g

    I know kiggly sells a kit for this. However is it really needed? They say it destroys pumps. I dont want to risk it. I have multiple starter plates laying around. I only have the 2g flex plate. I still need the pilot bearing.But is the kit needed or could I make my stuff work? I just dont know...
  26. jpmxrider489

    2G How can put the hazard button on a switch

    I need to relocate my hazard button. I am using a gauge pod that goes in the vents. I deleted all the rear wiper stuff so I only need to worry about the hazards.What wires could I tap into to put the hazards on a on off switch?
  27. jpmxrider489

    The road to 600whp

    jpmxrider489 submitted a new DSM Profile :The road to 600whpRead more about this vehicle here...
  28. jpmxrider489

    2G Help with a modular cooling setup or EWP

    My water pump is going out I believe. Coolant temp goes down while revving the motor and I hear a slight whine as well. So I have been thinking about going electric. Was wondering thoughts on this. The car isnt a daily but is driven on nicer days. I have a -16 hose setup on a chase bays rad...
  29. jpmxrider489

    2G Color options and opinions

    I am looking for some opinions on color options for my 2g. I have always like the white car blacked out. Most of my cars has been this way. The car is 95 talon but with 97 appearance. Do you think I should keep it a factory paint color code? If so, should I stick with a year specific paint...
  30. jpmxrider489

    Resolved Oil pressure/90 filter housing issue

    On my 6 bolt with 7 bolt head that is in my 2g, I am trying to diagnose low and high pressure issue. I do not have balance shafts and I dont know if the ofh was ported or not.Cold start=70 psi Warm=15 Cruising=30-50My issue is I am leaking oil under the timing cover and for the life of me I...
  31. jpmxrider489

    ECMlink holset airflow issue?

    1). No boost, vac, or exhaust leaks. Boost leak test. leak from 10psi is well over a minute. From 25psi to 10psi took 45 seconds. From 34psi to 25 took 16 seconds. I have the factory pcv with a check valve tested to 30psi and routed like factory. I two catch cans both recirculated back to intake...
  32. jpmxrider489

    2G prothane suspension and handling questions

    I have some questions about some suspension stuff. I am currently running koni yellows. I have tein springs in the front and eibach in the back. I have corrected camber and toe. I also have upgraded the rear sway bar. I have been doing some pulls with my holset setup and getting into the higher...
  33. jpmxrider489

    General Misfire under higher boost

    I been having a misfire issue. So a little history first. I have ran 25psi on e85 with a 20g without misfires. But the car, has always had a random misfire code that it would throw a few times a year. I clear the code and everything is fine. The car ran fine.When that motor spun a rod bearing...
  34. jpmxrider489

    2G 7 blade hx35 oil and boost issue.

    I am finishing up my build and finally got the car to idle. My 7 blade hx35 is rebuilt. I have noticed oil in my intake pipe. Could this be to high of oil pressure? I will confirm pressures today and post back. I have a catch can properly set up as well.When you measure the pressure for the...
  35. jpmxrider489

    water pipe modification

    I have a 7 bolt water pipe setup and I am no longer using a water cooled turbo. I am also used a 90 ofh. So I been wanting a versitle setup rather than just welding them shut. I want to cut off the nipples and weld bungs on in the factor nipple locations. For the people that have done this, I...
  36. jpmxrider489

    How to remove and plug throttle body ports

    I have been wanting to remove my throttle body ports for some time now. I know the caps would crack or blow off. I wanted a more permanent but reversible if needed. I have read that the nipples are removable and people would weld them or jb weld them shut. If you are looking for a reversible...
  37. jpmxrider489

    ECMlink fic 1650 high z tuning

    I have a few question regarding setting up idle on these injectors. Normally I would set the global and then adjust the deadtime to fine tune idle. I have no boost leaks at 25psi. I also have the resister plug from ecmtuning installed. Now I have the fic data sheet. My question, do you set...
  38. jpmxrider489

    For Sale 3an to 4an lines

    I have 6 of these lines. I ordered the wrong ones and I cant return them. These sold for 30 a piece. They are a foot long. One end is 3an and the other is 4an. Three are opened and 3 are new in box. I would like to sell all of them.
  39. jpmxrider489

    2G 16an fitting options and cooling setup issue

    This setup was installed on a 1g which I guess has more room from the motor to the rad. Anyhow, Does anyone see a easy way around this issue? I got two push fit fittings from fragola which are shorter than normal fittings. I even tried a long route but its still two tight of a bend. Does anyone...
  40. jpmxrider489

    For Sale Pte 1000cc injectors

    I have a set of used PTE 1000cc injectors. They flow like 940s according the dsmlinks wiki. I ran pump and e85 threw these no problem. I am selling because I was close to running out of fuel on my 20g setup with e85. The seals are reusable but it would be best to replace them since they are...
  41. jpmxrider489

    2G how do I run twin scroll waste gate lines

    I have just recently upgraded to a twin scroll setup with tial mvs wastegates. When I had a single wastegate, I installed the way my aem truboost directions said to. I believe before I had the turbo port going to the solenoid. Then the other end of the solenoid went to a T and had the side port...
  42. jpmxrider489

    2G Feeding ofh with nt water pipe

    I am installing my holset this weekend and doesnt use water lines. I have a NT water pipe with a 1g thermostat. I also have a 1g turbo water pipe but is in pretty rough shape. Rather than using either my 1g or 2g turbo water pipe, is there a better way to get water returned to the ofh? I know...
  43. jpmxrider489

    logging sensors in dsmlink and gauges

    I am sort of curious what sensors other people are logging as well as what gauges you have in the car. My current gauges are all AEM. I have WB, boost, oil pressure, water temp, and volts. I am on SD and have dsmlinks kit for that. I am using their plug and play cable as well as the e85 kit. I...
  44. jpmxrider489

    Mounting battery in the trunk to pass tech

    I am going to mount my battery in the trunk and having some trouble. I want it to pass tech at the tracks. I already have the kill switch installed. I am having a hard time mounting the box to the frame. I cant mount it to the passenger side of the trunk because its full of bondo from a...
  45. jpmxrider489

    For Sale Pte 1000cc injectors

    I have these pte 1000cc injectors for sale. I dont need them anymore as I upgraded. 235 shipped. I'll include the seals.
  46. jpmxrider489

    For Sale Tdo6 20g

    I have a 20g that I would like trade or sell. My kit is a tdo6 20g that has a billet wheel and was freshly rebuilt. I have put less than 5000 miles on it. I only drive the car on weekends. I was never on the dyno. It saw a track twice. Dsmlink was showing 44lb/min at 25 psi. It has a tial 2...
  47. jpmxrider489

    2G Shimming pivot ball and clutch wear

    I had replaced my clutch a year or so ago and only driven the car roughly 5000 miles. The flywheel is a act streetlite, clutch is a act 2600 with a street disk. I have only been to the track once since this clutch install. I did purchase these items used but with extremely low miles (guy gave...
  48. jpmxrider489

    2G DSMLink boost control with AEM solenoid?

    I just upgraded to v3full and would like to do boost by gear. I know they reccomend the ingersoll rand solenoid. Was curious if the aem tru boost solenoid would work? Cant find much info on it. Also do you think the truboost controller is better than doing the boost by gear in dsmlink?
  49. jpmxrider489

    2G Heater core and fiav delete questions

    I am working on putting in my new motor and I would like to delete these two things. Reason for deleting the FIAV is because I believe mine is stuck and causes high idle on a cold start. Even after properly adjusting the biss and getting the ISC to correct values in link. The heater core, I dont...
  50. jpmxrider489

    2G Plugs, wiring, and fuse box relocation

    I have a few plugs that I am unaware what they are. I believe some of them are for AC, evap and stock o2 plug. There is yellow wires coming out of the alternator plug. Not sure what they are for. I just pulled my engine and want to clean up my harness. Im planning on moving the battery to the...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top