So my car has been in the shop due to bad a leaking rear differential. Got the seals and bearings replaced, but the ring and pinion is messed up and needs to be replaced. I'm guessing due to lack of oil in the differential? Price for a new ring and pinion is about $400. Would it be possible...
So I started having some problems with my passenger door were sometimes it wouldn't want to lock. From there it escalated to it not wanting to open up from the inside. Few days ago I tried opening up my passenger door and my door handle broke off! :ohdamn: I tried opening the door from the...
So few Months ago my Battery light and radiator light turned on the day after of some heavy rains. After searching I came to the conclusion that the water damaged the voltage regulator in my alternator and my alternator was slowly dying. I have since then replaced my alternator and the two...
Like everyone has stated there is no difference on 2g ecu's. You probably are thinking of the 1g which the ecu's are different from m/t and auto. Stick with the Eprom ecu though!
I'm having the same problem except its my first gear. Only happens once in a while and not all the time which makes me hope that it is just a shift cable prob. Keep us posted!
You may want to post this up in the Socal Regional section. GT fabrications is in the Buena Park area and I bet a lot of the 1g guys would be willing to sign up for this. May be able to get a lot more interested that way as well.
The guy isn't saying that Monster can buy the court system out. But basically that even if he wins the case Monster can then come back and appeal the decision. Monster would be able to do this over and over again and never take a huge hit to their pocket in which the little business would and...
Well I think the problem was that I had air in my line because its much easier to shift into and out of reverse now. But I'm still a little worried because the trans still sometimes pops out of first. Which leads me to believe that maybe I have a broken clutch fork.
Where is the reverse light switch located? The shift linkage has a lot of movement where the rubber bushings are on the trans. Im debating of either trying to put some skateboard bearings see if that helps or just go out and buy new cables all together.
I checked out the linkage today and I really don't see anyway of adjusting them. What I did notice was that one of the rubber grommets on one of the cables was all crubmled up and pushed up the cable. Not sure if that could mean the cable is damaged or not. I searched on how to adjust the cables...
I just had my transfer case replaced and while driving back home from the mechanic's everything seemed perfectly fine. Car shifts smoothly and I have no complaints but when I was parking I put the car in reverse and thats when I realized that it is extremely difficult putting it in reverse and...
Alright guys so I passed! Seemed like the new plug and wires sure did help a lot. I also drove the car around for a good hour before I took it in and I never turned it off to keep it warm. The tech said my idle was kind of low and raised it a bit and I ended up with 12 points of hydrocarbon...
Yea thats actually a really good point. I made the mistake of just driving down the street to the smog station without letting it warm up completely. This time around I'm going to go for a good drive and then take it in. I just realized I left all my tools at my parents house so not sure if I'll...
Awesome! I'll clean out my EGR tomorrow. But yes rock1t consider yourself lucky! I just hope I pass because tomorrow is my last day for a free retest and I really don't feel like paying again.
I took my car in last week for a smog check. I passed all across the board except at idle my hydrocarbons were to high. Max is 100 and I registered at 155. I recently replaced a dead 02 sensor which eliminated my check engine light and I thought I was good but apparently not. The tech mentioned...
Ugh I don't know if I'll be able to make it. Seems like everything piled up on Saturday for me to do. Larry Mike. I have a new number so I'll PM it to you guys so we can all keep in touch. Been about a year since I've seen you Mike but Larry I think its been about 3 years now. I still look 15...
That looks great! But now what you going to do to see how much gas you have? I would of put it either in the oil or temp gauge slot and then gotten an aftermarket gauge for either or. But none the less it looks great!
I actually just picked up a MR downpipe from a friend. But the thing is there is absolutely no neck downs it is full 3inches. So I'm guessing maybe I have an older version or could this be the new version? Regardless I know I need a aftermarket 02 housing but in your case with the 2.5 it will...
Like everyone said it will work fine. But what you need to do is grind down a little bit of the bottom right hand corner of the flange that connects to the head. So it can fit in perfectly.
Looks like you have the Turbo XS RFL Bov, there isnt a recirculating kit made for that because that bov is made to vent to the atmosphere. What you may want to do is try and come up with something to make it recirc. back to the intake or trade someone for a different type of bov that will work...
Well I just got back from a month long vacation in mexico and well I'm ready for MOD. But hey Mike are you still going to come on friday night; so we can leave early saturday morning?
I have a extra intake air can for a 2g if you want to use it. just let me know. You can also try www.sddsm.org someone there may be able to help you out too and a lot closer.
haha well I mean I have more I guess I'll give off a better one. What happened one night I went out to a bar and drank way to much. I ended up loosing my house keys and I thought I was calling my brother to open the door, but I was accidently calling the house. Well my mom came to answer the...
Well today I had a pretty big embarrassing moment and thought it would be fun if we all shared what has happened to us. As for me what happened today I was at the mall shopping and was there for a good amount of time. Well on my way out I realized I had my shirt on backwards with my shirt pocket...
I personally would just take it to a place that specializes in A/C repair. Brother actaully took his car toa place the other day and got his system recharged and they charged him about 150.