i know someone is going to say search and i have searched and the info is very limited with auto transmissions, i've called jacks transmissions i've called stm and i've called a few other places, nobody seems to know squat about this. does anyone know what parts i will need to mate a 2g auto...
does anyone know if anyone else makes a kit similar to this besides Kiggly? also what other parts do i need to make the 6 bolt to work with my auto trans? or is there some kind of adapter plate so i can just use my 7 bolt flywheel?doing this for someone who has a auto 99 eclipse gst...
Yes I do. When it first started to missfire. I was unsure of why as i had that box unchecked and was not able to get a CEL, Even using my mac, matco, or old red brick scanner wasnt able to pull a code. So I checked that box and drove it and pop comes a p0300. And I still have it checked.I...
Most of the time on the highway in 4th / 5th gear or crusing around town in 4th not exactly sure on the rpm's . I can check tomorrow and see at what rpm's it does it at. But it is annoying as heck especcialy when I have my kids friends int he car.I dont think it has done it in 1st gear...
Ok this might not be the right place for this. So If it is not Mod's please move this to the correct place.Ok so I have a 6bolt bottom with a 7bolt head, with the green top cas with the harness from RRE, I also have the box checked in link for non 95/96 cas. And yet I still get the dang...
WalMart Brand has been good. Just make sure to read the bottle as I stated in another post. Also some brands may add some other stuff in there just check the additives.You can also use HEET(gas line antifreeze) it is pure meth and is a great booster to washer fluid.You can also use...
LOL yeah I know. I have been putting my kit apart piece by piece Using that diy.
Great minds think alike :thumb:side note I have noticed when using washer fluid, You cant just use any brand. -20 degree's below zero as it will contain a large percentage of methanol mixed with water. Make...
As Stated above it is not very hard to build your own kit. You can use shurflow pumps or one from devils own, Shurflow is cheaper.Items you will need is a pump, Nozzles,High pressure switch, relay,Wire, Brass fittings,Water tank, Then either denatured alcohol, Distilled waterYou can...
If the scratch is not to bad just take some sandpaper or emery cloth or green scotch bright pad and take down the scratch so there is not any high spots. Just do not go to crazy with it ;)Our motors have roller rockers so they will go right over the scratch with out any issue's:thumb::thumb...
Ok So for the life of me I can not figure out how to post a log or what the heck I need to do it. I have searched and have not come up with a definate answer. I am at a lose.Calan, This is where you chime in and save me :DP.S. do not shoot me :thumb:
Yes Sir, You need to Log your WB in link. Here is a write up on how to do it for you.http://www.dsmtuners.com/forums/articles-electrical-wiring/383190-1g-2g-aem-uego-wiring.htmlYou need to get a warm up log, and a cruising log. Also you need to capture mafcomp,combinedft,maf.
Ahh Ok thanks Brian. It just stinks having to dial everything back in again. It always resets to the old setup with 950's and I am on stock inj's atm.I thought it was something I did, when I relocated the bat to the trunk.How do I reload a tune after the battery is disconected? As soon as I...
Ok so I am having issues, everytime i trun my battery disconect switch off, I lose all the settings in link and have to start over again each time:banghead:.I read on the wiki about saving it in direct access, But I get a popup that says This ecu does not support direct, byte-level access...
Good luck on your goal.
I am running a blouch racing 18g with a evo3 exh housing and dump. I just installed it not too long ago. So I am working on perfecting the setup.Let me know how you make out, and what info you are able to gather up.
:thumb:
Woops lol, Cleaner, cooler, apples and bananas ? ROFL .I know where the oil comes from haha. I had a blonde moment while I was typing.:ohdamn::ohdamn::thumb:
The biggest Injectors you can use on an safc is 650's.You can either buy a waly 190 or 255. and do a fuel pump rewire
http://www.dsmtuners.com/forums/articles-electrical-wiring/313914-2g-fuel-pump-rewire-pictorial-diagram.htmlYou also need to think about your power goal's and go...
Ok, So I installed a new shift fork and fulcrom ball, rebleed the system and now I have a dead stop at the top of the clutch pedal =( I am going to replace the clutch master even though it is not visibly leaking. They can have an internal seal leak which might be my new issue hopefully. It is...
Thanks for the definition on that code.Also I purchased my ecu from a member on here. it had trace repair work done to it. So I am hoping that it is not the ecu.:cry::cry:
Everything is new minus the fork and ball. And the pp and flywheel. I do have a ss line from the mamaster to the slave. Also followed the video to a T. And still no first or reverse
.
Maybe ill just put the stock pp and flywheel back on and use just the act 6puck disc ?I have done all the...
Yeah sorry, I have no idea why I said PP. I ment to say flywheel. Sorry about that, Thats why I said he had it resurfaced. I was thinking flywheel yet typed PP. he had this setup in his car and had no engagment issue's at all. And I thought it was strange to have every other gear but 1st and...
I have tried it with the stock slave rod aswell. I don't think there was a change at all. I will try it again and re adjust everything and see how it pans out.Actually it is a used PP that I got from a friend. He had no issues in his car and I'm pretty sure he had it resurfaced aswell and...
I am using An Mac task master and a Matco scanner, both came back with the same code. I am wonderign if it is an OBDII fault code ?And thank you very much for the diagrams. :thumb:
I tryd that. I even did it where i could just move the slave rod by hand. I will try again. This dang ACT is kicking my arse.. been tryn to figure out for 3 days now haha.
Ok so here we go.I just instaled and act 2900 pp act street light flywheel and an act 6puck unsprung disc in my car. with a new TOB.
I am not able to get into first or reverse it grinds like hell. I am able to get into 2,3,4, and I think 5th.I have shimed the fulcrom ball with 2...
Ok So I was forced to drive my car with no first gear or reverse just to break in the motor ( had to keep starting it to check the clutch adjustemnts worked and did not want my rings to not seal right) And it ran ok until it started bucking and popping. while it was doing that the WB would rean...
WOW, Nice. I was always told that was imposible and could not be done due to the cans being to thin. LOL, Now I know it can be done. To bad I dont own a tig. One day I will. Just not sure of a decent one to get to start with.Anyways congrats on the cans.
DupliColor makes Rim paint and it works good. Just make sure you do all the prep work then clear the rims after. It can be found at any autoparts store's And I think walmart's.Dupli-Color :: Wheel Coating
DupliColor makes Rim paint and it works good. Just make sure you do all the prep work then clear the rims after. It can be found at any autoparts store's And I think walmart's.Dupli-Color :: Wheel Coating
Looks Good. I had my trans painted once. And now with this build I just bead blasted the whole thing. Loooks brand new from the factory(maybe even better) LOL. but yours looks good. cant wait to see it in the bay.
Yes I know. It is nuts. Heck they can just be driving and figure out if I have insurance,registerd, etc etc. I hate our new plates, they are just horrible.
Yeah Tru story on that. They keep changing our plates Here in NY, They are now orange and black. I used to have my plate in my front window but got sick of tickets.They said the reson for changing our plated was it makes them more visable... Umm i would have thought the white plates were...
haha, I stopped a green GSX the other week. I spoke with the driver and said I like the car, what turbo are you running. The driver was quick to say its stock! (thinking i would give him a ticket if it wasnt) I lauphed and said again what turbo? He looked at me funny and said uh-a green. So I...
Yes it is illegal here in NY, Along with tinted tails and headlight covers, And any tint that is more then 70% In all windows now. NewYork changed the tint laws =(I get yanked for my tinted tails all the time. I just swap out tails with my buddy get the "fix-it" ticket signed off and back on...
Simple terms - a hunk of metal (or other thing) starts out at ambient temperature. It's exposed to other another temperature that warms (or cools) the surface. As time goes on, the head (or cold) evens out throughout the metal and the thing is "heat soaked". If you take away the source of the...