What's your logo "dcp" stand for?

Interested in this. I was looking into getting the qa1 bump steer correction kit for the 05-10 mustang. I've read this works on a 1g with very little fab. It would be nice to find a easy solution to address the lower ball joint for roll center.

Good to know.

I prefer to call mine a slick top. My 97 gsx is a none sunroof car and I'm the same way every time I see a turbo 2g I look for a sunroof, lol. Guess I have a fetish too. They are less conman and have a little more head room. I'm six foot and alway skim my head in my girlfriends gsx with sun roof...

:applause: Very nice piece!

Same here 255lph and fic 1350's ran it that way for 5 years on e85 with no box and drove smooth as could be. I also made 440 on mustan dyno with 60% idc.

How you gonna put coolant in it?

1g bov will work fine.

I thought the same thing. All the years of messing with these cars never seen one stock flange tho. As for a erl t3 manifold I doubt it. Their cleaning shop now of all the import stuff and are focusing a lot on ls engine

Anybody ever seen one of these? My buddy works at erl and was asking me if I was interested.

FlyinTalon updated Just an Eclipse.View updates to this DSM profile...

I seen the same video like every body else. They seemed surprised it happened. Jett racing has a 4g swapped datsun and a 6sec eclipse with a billet block and were asked if they were gonna switch to billet in there datsun truck that's getting ready to break 6's . They said no. In the 12 years of...

Well because a MAS sensor reads from normally the intake manifold, any boost leaks you have can go on undetected do to it's only reading the air that it sees at the intake. So it's also easier to tune around things like this and in some cases people gain power is because they were able to tune...

Ecmlink is great it still uses the 25 year old stock computer.

Well I made over 450 to the wheels on 2g maf and I'm setup and ready to make 600hp this spring with 2g maf

If you have no boost leaks nothing works better than a maf setup on a stock ecu car. Since you already have a 2g maf that's perfect. It's not a restriction and your goal of 600 can easily be made with a 2g maf don't even bother with a gm maf , save your money and spend it elsewhere gaining...

Nice where'd you pick the spark plug cover up at, looks good with the color of the valve cove. Great work.

I call it a header too! Turbo header hows that sound. Lol

Thxs Gstwithpsi I wanted something different and was looking to get the car up and going after setting for a month it's spray paint. For some reason the paint didn't lay as well as I hope so when the snow hits the valve cover will come off and be addressed. But come on man I loved the black...

Seen this a while back thought it was interesting.

Congrats to Jeff Bush and English racing for resting the world quickest dsm record with a 7.38 at 187.94 mph in the word cup finals, import vs. Domestic over the weekend!

I was gonna throw a baffle back in mine. The guy that did the welding for me burnt it up pretty good so I'm gonna cut it out and probably leave it out. I also have -10 lines welded in the stock location. Keep posted on how fast the catch can fills up. I knew you'd keep those wheels they look great!

Yea I know we talked about that if you go back that was also when he was running a Hal Landry oil cap. With the new valve cover setup I was curious.

Nice the new valve cover and fittings look good. Did you put the baffle back in? I'm thinking of leaving mine out.

Your AN lines look good! I did mine the same way.

FlyinTalon updated Just an Eclipse.View updates to this DSM profile...

Hello and welcome. Were at in southern Indiana are you?

FlyinTalon updated Just an Eclipse.View updates to this DSM profile...

Your right I didn't even look at any of the other post. I came a cross it one day and figure hey this is a good spot to post a pic considering I just had the plate made. Lol and here I thought I was pretty clever, oh well.

2Lv8BTR

The thread is still relevant I don't see your point.

Care to share some pics of the new manifold. I love your build man!

I have also found factory service manuals that the dealer ship would use at Chrysler on eBay that you can pick up for cheap.

I also have used this YouTube link and like it a lot.

Not to sure how the local police will feel. Lol I'm gonna get pulled over all the time!

I thought the same thing about mine.I didn't even say it I just spelled it out the woman behind the counter didn't bat an eye.

Eat me , I'm slow lol. Still don't know the last one.

Paul walker drove a non turbo eclipse just like yours in the movie and they computer edit the turbo sounds in. Somebody correct me if I'm wrong.

Lap the valves in by hand. Make sure the seats in the the head are good and clean , then take a marker color in the back side of the valve then snap it down in the cylinder head. Next pull the valve back out and check the back side of the valve were you just colored it in, you should see a nice...

I have the same problems as well.

Please share!

Thanks for chimin in Keltalon I was thinking of you. That's all I was trying to say, is the cams aren't bad, and you'll hear a lot of people that don't have first hand experience try to tell you their junk. I wasn't trying to sale them or nothing. Guess somebody with a lil more weight had to...

I have gsc s2 cams in my car now there good cams. I'm not trying to have a pissing contest , but brain crower is not ebay. I'm not sure if you know how big there company is but they make parts for tons of applications and a lot people have good success with them. A lot of what people say is...

This cam gets a lot of hate for what 10, 15 peak hose power on a race engine that ams did one time for a magazine years back. This was my experience with this particular brand of cam that's it. My success was years back the grind on the cam is updated and more refined now. I was thinking for the...

Like I said don't lesson to what people will say Travis b has nothing to back up his clam. I just wanted to give a little of my own experience with bc cams because I know others have had good success also, but the internet will tell you no they suck bla bla bla! I was sharing because he...

Don't lesson to what you will hear about Bc cams I ran 272 in /ex for year with my 20g setup and loved them, spool good, top end was good, and the price even better. I ran my set up with out after market spring as well.

FlyinTalon updated Just an Eclipse.View updates to this DSM profile...