It is custom made but not selling seperately unless I have to sit on the shell for to long. Then I may strip it but the car doesn't deserve that.

All prices listed are best offer and shipped. Will ship Priority, First Class, or UPS Ground depending on item and weight. Local pick up would be great. May deliver trans for the right price and paid deposit in advance.2g Auto Transmission out of a '98 GSX 84k miles. Great Shape. Trans Torque...

All prices listed are best offer and shipped. Will ship Priority, First Class, or UPS Ground depending on item and weight. Local pick up would be great and is needed for the shell. May deliver shell or trans for the right price and paid deposit in advance.2g Auto Transmission out of a '98 GSX...

That restrictor you linked to at Extreme is for Ballbearing turbos the hole in that is something like .035 ..For what it's worth my car with no b-shafts and a ported oil relief filter housing, -4an line from ofh, a .082 sized restrictor brought me very good results with the t3 sc61. I bought...

Try to explain that your car is what keeps you happy and 'good boy' when she is not around. Try to explain all the finer things you could be out doing at 19.. Get her to the point where she is proud that car is what you have. But you must always make her feel more important than it or you'll...

If it is leaking from the hose end and you have enough extra line to trim it back a few inches with some type of cutting wheel try that. If you cannot trim it and make it fit, then you buy a new 2ft section(or whatever you need) of braided line..

Pics or it didn't happen?

You can go to extremepsi, and use their search for BISS screw and BISS o-ring. You'll want them both. They also have the rubber cap that covers the hole you can grab too if you want it.The BISS screw is plastic, heat the tip of a flat head and push it in there. You'll then be able to back it...

Something like this shall be my next cosmo mod, good buddy.With it thick or thin I bet it looks much better than stock.

Some have had a little luck taking it out and gluing the cover back in place. Most just buy a good one from the classifieds or junk yard and swap them out. The cover and airbag is one unit, they're only $30 or so.

Okay, the log is there now. I think there is some MAF and deadtime adjustments to be made still but I would like to have the idle down another 200rpms before the final tweakings.BISS adjustment was done and where it is now, it is only 1/2 turn from bottoming out. Idle is still around 1050rpm...

Alright, I had some time to mess with it this weekend and it's running much better. The problem it had with cycling in and out was I had the Simulate idle switch box checked. I unchecked that and the o2 starting working and it stayed in closed loop.After that I fixed some pretty large boost...

Hey guys, today I started my car for the first time in almost 2 years. It went through a pretty hefty rebuild and this is my first time using ECMlink.I'm having trouble with the basics, getting the idle down and steady etc. At first start it sat up around 3k and now after some TPS and Idle...

Spent another paycheck on it to get it back up and running ftmfw. Rear main replaced oil pan resealed and new southbend clutch from twicks69 installed.Next.

For what it's worth, the first turbo I ever put on my car was an ebay 50trim. This was one bought about 4 years ago and ran at 23psi daily until the car was put in storage this winter. Fed it with a -3an line, no restrictor from the ofh and it stayed on the car, running good for about 16000...

http://www.tmzperformance.com/Mitsubishi%20SBC%20Clutch%20Disks.htmlI just picked up a clutch kit here from Tim, a few days ago. I'd say for your goals the first one on that page; TZ-series full face Kevlar would be what you want. Pair that with your 2600 pp and it will be extremely smooth and...

I used a plastic "T" type connector (but a straight one) which allowed me to add about an extra foot and a half or so of 3/8" hose to that line. Connected a small breather filter to the end of it, and routed it down under the passenger fender.This keeps the smell and fumes away from the...

Did you ever happen to get a track recording so we can hear what it sounds like while it screams?

Put in 2 votes also. And, hey second place, $10,000.

The only other thing I can pull out of that gibberish is you are experiencing, Turbo Lag.You step on the gas, rpms slowly rise, turbo slowly starts to spool, and then it HITS.Again fill out your profile and let us know what you are running here or you are going to be impossible to help.

Making it one continuous sentence with a little confusion, for kicks. Was that your plan? ;)From what I could assume you were trying to say I vote on clutch issues as well. Sounds like it has nothing at all to do with your ecmlink.So, in order to accelerate normally again, you will have to...

Yes, it would be the first one there, $440. If you want to use an aftermarket flywheel instead of the stock 6bolt one you'll want to grab the 6bolt act streetlite and new 6bolt flywheel bolts instead. And if you go with the new flywheel you won't have to worry about setting step height, it would...

At least your rpms should have been pretty low if you were 50mph in 5th but, the trying to downshift and restart it multiple times afterwards probably hurt you a lot more. At best you lost near every valve but, end up real lucky on the pistons and can salvage them with a little grinding and...

Are you able to look at your timing belt, make sure it's is still on and well? Check if your oil is still full and looking good. And can you still shift into the gears?

Aftermarket.COMPACT PERFORMANCE 2.0 NEON1995-99 L4 122 CID BORE - 87.5mm/3.40"Valve: Int 1995-99 01730R - 1.409 Head Diameter Exh 1995-99 01731R - 1.221 Head Diameterhttp://www.sbintl.com/downloads/sbi107-10.pdf page 18 of this document.

Big unorganized part out list 1g&2g - DSM ClassifiedsHere you go, all the way from the dsmtuners classifieds part out section. There's both 6 and 7 bolt pans listed in there.

Grab a 85.5 .020 for it. I'm wondering if you have a shift key?

There you go, KYB gr2's at rockauto - $200 gets you all four.

I've never had a 1G but about 4 inches to the right of your hand in that second picture looks to be a black plug. That may be the spot for the clip.

You know that kind of like................ Did it for me?

Stock head is easily fine with that. Listen to Darren if you get it rebuilt, Bucshur builds some great blocks but his head work is not that amazing.

Shorty after I bought the Talon my bank account went from ehhh, to; WTF?! But besides that it's been pretty sweet, so I can't complain.

You won't Josh, they caught this girl in a lie I do believe. It would be her going if anything. She was trying to get big monies acting like the flu shot destroyed her nervous system or some load like that. She played it off until someone busted her with a hidden cam while she wasn't...

These guys will always hold me down.

My best moment had to be the first time I turned over my yet to have bought Talon, and it ran.Shorter story, a local kid just paid a shop to swap in a 6 bolt and put on a new clutch. He thought it was still low on power so he decided to put in some 650 injectors and a mbc; only was totally...

If that's your state law then when one does write you a ticket for it there will be no fighting it and winning. The judge may drop it though as long as you have been given a few other tickets to go along with it. LOLBut for the most part you are usually given the option (fix it ticket) where...

http://www.dsmtuners.com/forums/152157801-post108.htmlI came so close to buying that from him but he already had some negative feedback so I let it pass.When you live that kind of life eventually one will catch up to you. And there are many DSMers to catch up to him in Alaska.

:notgood:

Ward will get it done. Who Dat!!

^ is rooting for the right team. Steelers the TBA SuperBowl XLV Champions.

What the ### Pittsburgh, Get them boys Take them boys.

Congrats guys, I'm quite pleased to see this new batch of Mods on board. It's a definite step in the right direction!And spawned... I believe your said nudes caused my firewall to try and block this thread for it's "Adult Content/Pornography" Boy am I sad it wasn't true.

SOTP IT Gofer, it's making me jealous!! :D

And I thought this storm had heavily lifted its leg on the NY side of lakes today. We have it easy cheesy, it's only chest high against the house and across the driveways. First time in probably 10 years a storm has left this much fluffy rain behind.Now if only we all had a skidoo with a...

Check classifieds and try a search of the forums. I can't remember where it's posted or who it is but there's a freelancer on here that makes them and has a thread about it. Try stuff like custom gauge pod vent pod ect..

Yes, Very nice!

I love all the gas money and random parts it saves me while he's hibernating for the winter.

That's going to be quite hard to look at while driving too. It looks nice though. Have you tried mounting it a bit higher or even better right on the dash above the 2 center vents? I'd hate having to take my eyes completely off the road just to glance at them.

call them white girls and then tell them give me a boney:aha:

The cops love going after the little stuff because that is the quickest and easiest way to get themselves and the state the money. They hate doing paper work above anything else and all these violations add up to little paper work little time spent and a real high chance the person will just...