like title says need the part number from Napa or carquest. I usually ask them and they always get it wrong. :( would really appreciate it. Also for injectors and belt.
Thank you for the help I really appreciate it. I have the new parts just need to ask one more question. Would you recommend using that copper head spray stuff or not?
dam gonna have to get another... whats the part number at napa so i can get the correct one this time. i need the whole set with intake and exhaust stuff. would really help me out if anyone could.or should i just go back and look up the gasket set under mistubishi?
Honestly I was in a rush at work when I order it. I don’t know exactly all I know is they said it would fit both which didn’t sound right. Will know 2mrrw and post part number thanks you everyone
Since i have to do the timing belt and water pump. I will be doing all front suspension and steering parts. it kinda looks like it would be easy to pull the end cover off the transmission with it in the car after i would've removed all the front upper and lower control arms. Looking to pull the...
i could just lift the front end of the car and spin the wheel and watch the other wheel if it spins the other direction i assume its fine and if it doesn't move its seized, at least to test the broken or seized gear part. not sure if it will work but asking for your thoughts on testing it that...
the front left intermediate shaft was missing the very end right where the c clip was and kept falling off so i replaced it. i can't say i heard anything bad just tire noise. i dont think they welded center dif since the car is completely stock, atleast from what i see. but i've read alot about...
HI just got my awd fixed on my car and the cold start problem fixed. first thing i noticed while turning on asphalt it kinda feels like a 4x4 is locked in is this normal? like the wheels are fighting each other and if not would it hurt my car since its a light car? 1997 eagle talon tsi awd
K ordered the coolant temp sensor was like 27$. They asked if it was a Mitsubishi motor or Chrysler I said Chrysler but I’m Not sure. how do you tell if there is a difference or if it even matters. If I’m mistaken the 420a was the Chrysler motor but they also asked if it was turbo’d so I don’t...
Hi just got the car finally got below freezing and the car won’t start. It was 24 degrees Fahrenheit out when I took the photos. ignition on not running. I don’t know a lot about these cars but I am a somewhat educated mechanic. Just not completely sure what I’m lookin for.
If I pull the intermediate shaft it would leak was talk about the cv shaft. I was planning on just driving it to the shop so I can fix it. I have a new problem now posting new post thanks for the help. I understand the open front diff part just doesn’t explain why I can do a rwd burnout in the...
It does move without the front half shaft dunno why it can, but I know what you meen by free wheeling. Just want to know If doing maybe 15 mph to get to the garage would hurt anything in the front end? Not extremely worried about the cv shaft getting messed up. It’s 4 miles and it’s the front...
Or do you guys think I should just remove the intermediate shaft and try to grind out the c clip and replace. Kinda been noticing that these parts are pretty scarce. Can some one post a pic of where the c clip is supposed to go.
Well I was asking cause right now the front left cv shaft keeps pooping off the intermediate shaft and from what I can see there’s no c clip to hold it in. I found this but I don’t know. https://www.mitsubishipartswarehouse.com/oem-parts/mitsubishi-intermediate-shaft-mb620806 from what Ive read...
hey I’m new here. I just picked up a 1997 eagle talon tsi awd. Was wondering if the front left cv shaft and the intermediate shaft where interchangable from manual and auto transmissions?
these people i talked to they said every once in awhile the car will start up fine but when they start to drive it. there engine will start losing power and it'll start bogging down then just die and won't start do you have any tips on what it could be. excluding the ignition wires and spark...
if i lose i'm not only going to beet him next time but i'm setting a goal for my car and if something does blow up it gives me something to learn money for me is not a problem i want to learn about the car i could easly just bring the dsm to a shop and give em 5g's to fix it up and i can beat...
i'm not trying to blow my engine and i'm not impressing anyone i just hate the kid cus he buys a pretty quick car and knows nothing about it and acts all good about he doesn't even know what a alternator is or even were the power steering is just annoys me...
its not racing its a event that is legal in my town theres cops and ambulence its like a day at the track but you can race other people its made to keep car with high performance from racing on the streets
theres a 500bhp drag racing blazer outside and another 400hp one i know how to race and i know about cars i just want to squeeze some more power out b4 i have to get deep into the car. i want to make sure i will beat him. He won't race the blazer cus he know he will lose thats why i need...
well my plans is to have this project done by next year i'm hoping to be pushing about 600hp but idk how much i can put into the engine b4 i have to fix up the tranny
driving isn't the problem just need a car thats somewhat street legal for him to say a yes to racing me in fun dayswhat kind of mods could i buy to make certain that i win that race????
so a auto would be good. and do you think the tsi would beable to beet a chrysler crossfire cus this kid up here wants to race me at fun days its a drag racing thing for our town to test out what our cars got. anyway what would i need if i couldn't?
i am planning on it cus when i get the car i'm putting every full pay check into it cus i don't need to pay bills. but my question was will the manual or auto tranny matter in the acceleration of the awd turbo? not the 420a
is there any big diffrence in the launch of a awd auto then a awd manual like in acceleration. i'm planning on trading my 97 420a for a 92 tsi awd auto.