The fuse box thats at the kick panel im wondering what the little detachable black box on the back side of it is.

Hey guys... Im having huge issues with my 2g... let me start from the topI was in process of removing heater core and air bags in my TRACK ONLY car... well I figured if I am removing the core I wouldnt need the harness connectors. I decided now would be a good time to test my skills at wire...

Ok guys im in desperate need of help here...I have a 96 TSIso in my infinite wisdom I decided that it would be a good idea to remove the dash and take out and remove the heater core and AC stuff... Since I was in there I was thinking... air bags aren't needed... removed those... and well. ABS...

Hey guys...Im looking for a turbo blanket for the FP Black... I am getting mixed information on what to get... if anyone can give me some information that would be great...

Hey guys I have a 96 talon tsi with a shep 4 trans, act 2900, new oem master cylinder, oem throw out and extreme psi clutch line.So heres the problem..When the transmission is "cold" it will drive/shift/ everything just fine (plenty of play in the peddle as there should be) as the...

looking for a tuner in the greater Boise area, someone good with link. Ive talked to a few shops in the area and most aren't familiar with link.Thanks..

96WhiteTSi submitted a new DSM Profile :2gRead more about this vehicle here...

I'm moving to Boise area and am in need of a cage built and installed on my 2g. Wondering if anyone in the area knows of a place.

Hey guys... I have read a few other issues of peoples idle problems.. doesnt seem to match mineI have a 2g 7 bolt...I changed out my intake manifold to an evo3 and a 1g tb (turbo i believe) Changed the 1g tps to 2g tps.. adjusted TPS and even did it in linkI start my car and idle...

Up for sale I have5 gallon AEM brute force NIB meth injection kit.... 400$$ AEM meth 1000cc flow gauge (black face)NIB... 175$$$NEW Manley pistons (standard bore ) 8.5.1 compression attached to the Manley rods already!!!!! A time/money saver right there... (will not seperate) Manley "156mm"...

I finished installing my HX40 today and started up my car to test pressure going to turbo from OFH noticed my oil drain has a LARGE leak in it leaving a puddle on the groud with... AIR BUBBLES!!!! i turned the car off and pulled dip stick.. bubbles in pan as well...Before all this i had a...

As the title states .. I need a bumper cover for a 2ga talon.. please let me know if u got one or if you know of a junk yard with it in there.

Ok so I have this leak SOMEWHERE on or around the head area and it all seems to collect around the exhaust ports... and leaks down the timing cover off the OFH area... at first i thought it was the OFH but.... its not that after cleaning it up....took the manifold off and saw...ANDand...

My questionI am going to install a Fidanza Lightweight Aluminum Flywheel on my 2G. I was looking around on Forced Performance and I found theseForced Performance Turbochargers: DSM Aluminum Flywheel Hardware KitIm just wondering if these are a "must have" or will the factory...

Just a simple questionI was wondering how one goes about getting a better "response" from the steering wheel? I dont mean to just remove the "slop" but i also mean like as soon as i move my wheel i want my car to move that direction.... how to i get this??Struts and sways will only get...

Ok, I did a bit of searching and the pages where far to many for me to keep searching through... Most that I did look at had nothing to do with my question at handMy question.. With 280 cams will single upgraded (such as BC or what have you) be sufficient or is beehive or dual spring set...

can anyone tell me the size of the bolts that hold the turbo to the manifold?? i know they are 14mm heads.. but whats the length.. and whats the pitch on the thread??? anyone knowDSM OEM Turbo Bolts and washers kit - Turbo Accessories - Turbo - DSMparts.comlike those ones...

anyone know of these turbos?? anyone know where i can find information about said turbo.... i have searched high and low and havent found anything about them... any help would be great!!!!!!!!!!

Can anyone help me here?? I need to find information on this Dre Spec 50 trim on where i can get oil and coolant feed and return lines from... thanks

Hi, I was wondering if anyone can help me out here. I bought this Dre Spec turbo and its does not have the "stock" car flanges on it for exhaust manifold or o2 housing. Maybe someone can tell me what they are.

ok.. well i have taken my engine APART for the most part.... checked everything over... i lost compression when all my rocker arms came FLYING off... i know sounds like i jumped time... i didnt... when i got the car home i took a peek... everything was still in time and i took off my head...