you have to do boost leak and eliminate ANY leaks that you have ( btw its not that hard to do boost leak :) )if you eliminate boost leaks go from there
thats the thing
i have brand new o2 sensori would like to know how to tune cruse and like step by step and how to edit fuel and timing map when i have knocki have evoscan so my knock is 2 counts by 5400rpm and 255 loadwhat should i do now ?
what kind of injectors do you have ??i have PTE maybe PTE has some problems witch startsups idkmy fuel trims are okay in -+5% rangeidk does anyone have startups problem with PTEs injectors ??and another questioncan anyone tell me how to tune cruise ?? my fuel mid trims are off...
Thats good someone with 2.3 is here to help me :)Yeah so i only change 4 colums for 10.5 in fuel map too.Whats your fuel trims ??
and whats your injector scaling and latency ??Thank you.
Can you guys help me with maf scaling ??How to scale my maf ? since i have 2.3 stroker ??and another thing
i need to know how to change my fuel map since i have 2.3 and it sucks more air in and with this stock fuel map when im 1/3 throttle its hitting almost 10.5 afr cause my load is biger...
hey guysI changed Coolant Temp Fuel Enrichment table by -2It made the startups better but it is still not like it used to be.Can you guys help me with some other stuff in ecuflash ?:hellyeah:
I dont know than.I have PTE 1000cc now in my car and i have problem with warm startups.Back to the Topic did you guys mean ??Coolant Temp Fuel Enrichment ???i atached a pic
Thank you
hey guyscar 2.3 stroked 98 gsxi have problem with warm startups after my PTE 1000cc instali have Dialed in injectors good cause my fuel trims are in the -+5 areaso when the car is warm i have to give it a lil throttle on startup and for like 1 sec i see black smoke from my...
hey guysmy car 98 gsx with 2.3 stroked engineso yeah i started tuning with ecuflash 2 days ago
i instaled my PTE 1000cc injectors
dialed new injectors in pretty good because my fuel trims low are almost 0but my Aem uego shows 16.8 - 17.5 on idle ??in WOT its showing good...
hey guysso i got my 2.0 open port cable today and i went to the garage instal my PTE 1000cc and flash my ecu with ceddy modsmy engine is 2.3 stroked btwi changed injectors scaling to 940and latency i did " select all than add to data and i put .450 "my table looks like this...
hey guysi found a good thread on 3si forum about evoscanHow to: Tune Scaling and Latency tables for larger fuel injectors using ECUFlashi started reading this and post #2 and #3 says that evoscan values for fuel trims are incorrect ?is this true ?? Does someone heard about it...
thnks for that info but i just needed someone to show me or learn how to lower my timming by evo scan cause im putting my 2.3 stroker in this week. Later on ill take it for full tune i still have to get bigger injectors and fuel pumpcan anyone show me or learn me how to do it ? thank you
Hey guysi build 2.3 stroke engine and im thinking of putting it in my car this week.But i know stroke engines likes lower timming.Im looking for someone in chicago that knows how to tune with evoscani will evan pay you for a basic tune just the timming .ill drive by your...
Okay so is this right guys ??99gsx 7bolt block 4g64 crankThe Main bolts : 16 ft lbs + another 90-100° turn ??Thank you.and yeah hehe sorry i meant ''asap'' :Danyone ??
Hey guys.Im building a 2.3 stroker right now and i need some torque specs to do it right.I need torque specs for main cap , remember that im using 4g64 (2.4) crank,
are the torque specs the same what 4g63 crank is using ?Im not sure here thats why im asking you guysThe crank was...
check that EGR system
mine was leaking pretty bad so i just blocked it offthere is a lot of vaccum houses from EGR system under the battery check there
i know a lot about 2.3 stroker engine
but i was searching some more and i found thisRunning 9:1, on a stroker, with pumpgas, will have you running no timing at all.so i was just wondering if this is true. because ill be running 9:1 pistons on my strokeri know i shouldnt go over 5k without...
i read somewhere on this forum this"Running 9:1, on a stroker, with pumpgas, will have you running no timing at all. "is that true ?
because im bulding stroker motor with manley 9;1 pistons right now ??help me guys
Heyy all :DIm about to buy a block to do my rebuild (winter project )
and i dont know what block should i get ? i mean what year of the block ? with the thrust bearnings ? or split thrust bearings ?
To dont get the crank walk issue later.I want to build 7bolt block .so guys what year of...