The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

What did you do to your DSM today?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Moved the GSX out of the garage so when my grand prix gets dropped off I can have that in there until I can figure out what my no-start issue is. no thrilled about it being outside in the soon to be snow.
 
Bought a Gates Racing Belt L19 Headstuds and a Felpro MLS HG along with other misc parts.

Sorted out a cage, seats and a new motor to use while the stock one comes out to get checked over, stock split thrust 7 Bolt is getting the new parts and some boost!
 
Changed the oil, added Stabil to the gas tank, washed, waxed and put the cover on while in winter storage. Pulled the battery to use a smart trickle charger to keep it topped off.
 
Pulled my HVAC apart and vacuumed the mouse house out of everything, removed the a/c evaporator, scrubbed/disinfected the whole business, and tried fixing the last couple coolant leaks from the water-to-air setup. I hate mice.
 
After more than year of searching I finally found an OEM Infinity radio, not sure why but I like the stock look much more than aftermarket.
You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.
 
Made my cardboard mounting plate for the smart coils so I can get a billet piece made.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
Made my cardboard mounting plate for the smart coils so I can get a billet piece made.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.

Very nice, I've been looking at doing the Toyota/denso cop once I get around to it. How
do you like the Frontline Fab valve cover? Wanting to splurge on myself and have been wanting one, as well as their oil pump...
 
Very nice, I've been looking at doing the Toyota/denso cop once I get around to it. How
do you like the Frontline Fab valve cover? Wanting to splurge on myself and have been wanting one, as well as their oil pump...
Hey there. I love it. It sets off the engine bay. Yeah I went with these coils because I wanted reliability and wanted to get rid of that pesky transistor box thing. Lol
 
Last week I bought taps . The where expired since 2014. Installed my shifter base bushings and cable bushings and pulled my oil pan to fix the stripped turbo drain tube bolts. Took it for a drive now it's parked again.
 
After more than year of searching I finally found an OEM Infinity radio, not sure why but I like the stock look much more than aftermarket.
You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.


If you need another at some point let me know. I have one not being used and it works fine :)
 
oreded my ebc from classifieds gonna install next spring, put In storage for a while, parts needed to order.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top