I have to disagree with polyurathane beeing for show only, they are great all around, if you are going to replace them i highly reccomend getting these. Unless of course you don't like your car rumbling, i could see that as a down side for some people, although I consider it a huge plus.

While I have made a few motor mounts for Bullett I have not yet tested any on a turbo 420a. I made my first one for my 1g because the first coupler off the compressor housing was resting on the forward roll stop mount and I was worried about the coupler slamming up and down on it. It's worked fine on my car but I'm not going for the highest HP or landspeed records. Bullett's NA is a measely 200ish HP so I didn't have a problem with him running my mount. I know he put one in his daily but I don't think he's ever run his turbo car with one?
Anyway, I am hesitant to let turbo 420a people use them because they haven't been tested at higher horsepower levels.
I did receive a few emails but didn't notice until about a week after that they were sent to my spam box. I did reply to them.


--Steve

Paraquat said:

I know he put one in his daily but I don't think he's ever run his turbo car with one?
Anyway, I am hesitant to let turbo 420a people use them because they haven't been tested at higher horsepower levels.

Click to expand...

bullettdsm said:

Have them on all 3 of my DSM's.

Click to expand...

Reading is fun-damental.

345whp on the turbo ride with no problems on the solid mount. I see no problems at 400whp.

And don't tell me you think I have 4 DSM's That last red 99 is long gone.

MB

Nice.... looking forward to getting those soon!

Do they work on the GS-t's?

cyexmaster said:

Do they work on the GS-t's?

Click to expand...

Thats what I have solid mounts in. I like them.It helped a lot on my wheelhop issues.I would recomend going solid.

2009 was a good year. Here we are almost 10 years later and I still get PM's about these motor mounts.

WELL!
Good news for you people. I finally bought my own CNC machine and I'm willing to make these again if there's enough interest. I hadn't touched my red 90 in a while and ended up buying a 94 3kgt. I've been making parts for the 3SI community lately. They're a lot like DSM parts only twice as expensive.
I'd post in the classifieds but I don't have 30 posts yet. I was more active on DSMLink and CCDSM.

You can post in the classifieds now. Ludachris changed some new member rules and that is one of them so go out there and test, I bet you can post up right now, which, by the way, would be a better place to put your skills to use.
Welcome back!!!
Marty

Cool. I'll try it out. Thank you, 1990TSI.


--Steve

I'm having trouble attaching a picture but I made a few more if these if anyone is interested.
I might have better luck posting when I get home to a desktop PC.
Same design, only now I break the edges, the sleeve is stainless, and include stainless steel hardware. Same low price as almost a decade ago.


--Steve

Oh. I figured it out.
Next stop, the classifieds section!


--Steve