The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Rix Racing

My 2gb awd talon build thread

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

20180107_154908.jpg

20180107_154826.jpg
 
Just came back from another wot log. Forgot a stick light under the dash and it wedged the gas pedal down. It hit boost around 5,000 rpm and started pulling super hard. I had to pull it out of gear. I didn't know what was happening until I got home and inspected everything went inside pushed the throttle down and it stayed and I had to pry it out. Lucky I'm a praying man. Lol
 
Hey guys, I figured out my issue with my seal leak. I was using an auto bracket. The part number for the one you need is,
Bearing Support MB526981. This is the bracket for 95-96 manual. They look exactly alike. I measured them and they came to the same measurements. You cannot tell by looking at them. However, when I bolted it up, it was perfectly centered in the seal. I wanted to post this here so those after me would know.
 
So as you can see, I had to go back with a 2g cas. I was previously using a black top. My question is, do I now have to switch my firing order back as well as uncheck the non 95-96 cas box in link?
 

Attachments

  • 20180219_173629.jpg
    20180219_173629.jpg
    217.6 KB · Views: 109
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top