The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

420A FI/C6

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Inkdlyfe

Proven Member
438
7
Feb 23, 2016
Summer feild, Florida
Alright so finally got my car running again for 6 months but i had to actually remove my fic to get it to run, not sure why but with it connected it wouldn't get spark or fuel, after removing it the car runs fime hits boost idles alittle rich bht that's about all, the only issue I ran into was map sensor hi out put cell, NOW can I run the car with out a fic ? The car as of now is on stock yellow top injectors not my 880 like usual but i do have a aftermarket fpr, can I run the car like this or is it not heathly, the fic is getting worked on and if it is bad that's gonna be 300+ to fix, so is it ok to run it or should I wait or would it even be ok to drive it about 5 miles to get it home

70mm turbo
38mm waste gate
Boost contoller
Triple core IC
greddy bov
255 pump

There are some of the mods the motor is fully buillt also 8.8.1 compression
 
How are your AFR's? Can you monitor them while the fic is removed? If you stay out of boost (which is not as easy as it sounds) I think you should be okay.
 
I think you got the idea. I would keep an eye on my afr's & make sure they stay "reasonable".
 
Trying to do reseech on my fic do 98 eclipse 420a use mag or hall sensors
 
I ment to reply last night I found out yes, I believe all 2g use hall sensors
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top