V8nothin
Probationary Member
- 16
- 0
- Feb 13, 2014
-
Islip terrace,
New_York
So i am in the middle of fabricating my pcv system with a set of sealed catch cans from calan(very good product might i add) with two -8an fittings coming off the VC to the can then -10an to the turbo inlet pipe. Also a catch can from the VC-> check valve-> intake manifold as well. I was hoping to purchase a set of the compworks laser cut aluminum baffles from a fellow member here but it seems he is not going to be making them anytime soon as i removed the original baffles for this process. So i have decided to try to fabricate my own to have welded in. I am looking for opinions on if the way i made it if it will hinder/choke the scavenging process or will it be fine. I have cut notches on the sides off the baffle with a clearance of about 1/8th of an inch in multiple spots as shown in the pictures.