The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support STM Tuned

Torque Solution Motor Mounts

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

LidnDom

Proven Member
34
0
Jan 13, 2014
Tampa, Florida
Is anyone running Torque Solution motor mounts on their 2g? I couldn't find any pictures online of people actually using them. I wanted to get Avid Racing's mounts but they're discontinued now.
 
Just seeing this now, I had torque solution mounts on my old 2g. Looked great, felt EXTEMELY stiff. Not the best for a DD, but i dealt with it. All were bolt in, except for the trans mount. The bracket on the chassis had to be widened by about an inch to get the mount to fit in it.
 
I run them on my 2g.
The work great.... so stiff that after 1500 miles on drag week, the alternator case bolts vibrated loose.
 
What are your guys' thoughts about just running front and rear upgrded mounts and leaving the left and right stock? Would that yield a softer outcome?
 
I have all 3 and the avid for the tranny, as I am auto, so it is alot worse for me trust me!!!

But i like them and they work well (minus having to fix the mounts because of wrong sleeve hole size and lengths)??? Weird

They hold the engine nice and tight and movement is a thing of the past! So it just depends on what your happy to deal with,
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top