DJRace
Proven Member
- 157
- 40
- Feb 9, 2017
-
Walla Walla,
Washington
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Starting at the rear, we're in stripping gear.
Direct wiring for the fuel pump while i'm here.
After we stripped the panels and speaker cups, we attached the door controls to the plastic covering with vhb stuff. It wiggles so much that I will cut a small hole to mount them on the metal. Stay tuned.
We finished taking out the carpet, some of the insulating stuff, and headliner. Vac/boost, oil temp and water temp gauges are in the mail so the cluster is out and being prepared.
We decided this gross intake and Evo3-16G out.
Things are looking much better up here now. We can't wait for our intercooler!
Stripped down to a long block in the engine bay. The intake and exhaust systems are removed. Most of the interor has been taken out.
She's five this April. Too young to drive, but not too young to work.You and that dog I like he's on top the engine.