The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

2G Misfiring still

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

b00zt3d spyd3r

Proven Member
348
149
Feb 25, 2016
Lawton, Oklahoma
still okay so I've checked the power transistor, plug wires, coil pack everything is good with no change. In dsmlink I got dtc code for fuel injector circuit malfunction cylinder 1. Tested continuity for injector one it's good. Checked resistance for all 4 injectors and all read 2.4-2.5. They are mdl560p evo pink top low impedance injectors. Not exactly sure what the resistance should be on them. But with them all being almost the same I figure they are good. What else could I be missing? The ecu is brand new from ecmtuning.
 
Get rid of that Iridium shit and get some copper BPR6es plugs. Best 8$ you will ever spend. My car ran much better without those autozone upsells in it. I know it sounds silly but if you search everyone recommends them. Our cars just don't like the fancy stuff.
 
Get rid of that Iridium sh** and get some copper BPR6es plugs. Best 8$ you will ever spend. My car ran much better without those autozone upsells in it. I know it sounds silly but if you search everyone recommends them. Our cars just don't like the fancy stuff.
I already stopped on my way back home and got some new bpr7es and gapped them to.25. Will put them in later and see what happens before I send off ecu
 
confirm spark first, like jakk220 said noid light set. see if autozone or advance will rent it to you for free, this will verify ecu and injector circuit proper operation. problem solved.
 
confirm spark first, like jakk220 said noid light set. see if autozone or advance will rent it to you for free, this will verify ecu and injector circuit proper operation. problem solved.
I'll see if I can borrow one tomorrow and see what happens the noid light is about the only test I haven't done
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top