The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

2G voltage of the intake throttle position sensor

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Heryst78

Proven Member
121
11
Feb 9, 2017
Paris, Europe
Hello everyone

I would have liked to know if someone could give me the voltage of the intake throttle position sensor?

I dismantled mine to clean it but badly repositioned, result the car gives a few a-blows.

Thank you very much :)
 
5V is the original voltage?
Because when you turn the throttle position sensor, its voltage varies, and plays on the opening of the intake throttle.
Normally this sensor has a very accurate original setting.

Thank you :)
 
Okay thank you guys.
So I have to go on a high setting to 5V and I will get the right idle setting I think

thank you :)
 
Watch this video, Jafro breaks it down for you and even a helpful modded tool to loosen/tighten. I believe he explains how to do it without dsmlink to, but in the video he uses dsmlink. Side note for anyone that can't get .63 volts dead even(jumped to every number but .63) using dsmlink, make sure it reading at 100% nothing modified in the setting. I got a car from someone that just used the software to edit the settings to read .63 instead of adjusting the sensor itself.
You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top