The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Drag Race Build My 2g dsm second build, this ones going smoother

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

UPDATE! did some race car things today!
i picked up a 3g brake booster and 3g master and non abs proportion valve for that brakes.
first i rebuilt the 3g master cylinder so it fresh,
next i cleaned and sanded the booster and master (no before pics sorry)
then self etch primer then some fresh paint,
next im gonna do the proportion valve, either black or silver kinda undecided? what do you think!?

Brake plans- vvv

-front- Magnus front drag calipers and rotors, launch control solenoid (TO DO)
-rear- stock evo caliper and rotor, launch control solenoid, (TO DO)
-brake master, 3g master and booster, using it for the bigger plunger and brake booster (DONE)
-non abs proportion valve (PAINTING)
-all new hard lines are gonna be ran, (TO DO)

IMG_3620.JPG
IMG_3621.JPG
IMG_3624.JPG
IMG_3619.JPG
IMG_3625.JPG
IMG_3626.JPG
 
I didn't know pizza places made motors??? But if they did why not the gallo 12? LOL
 
MY MOTOR IS DONE!!!!!!!!!!!!!!!!!!!!!!! I JUST PICKED UP THE HEAD IM GOING BACK TOMORROW TO PICK UP THE ROTATING ASSEMBLY (no room in car)!!!! STAY TUNED!!!

whats done to my head?... this!

1g head ported

GSC Power S3 Billet 4G63 DSM 280 Camshafts Set
8 Ferrea Competition Plus Intake Valve 35mm +1mm
8 Ferrea Competition Plus Exhaust Valve 31.5mm +1mm
16 Ferrea 6.5mm Valve Locks Keepers
8 Ferrea Exhaust Valve Guides STD
8 Ferrea Intake Valve Guides STD
Supertech 96lb Dual Valvesprings Retainers
BLE 4G63 Evo 8/9 & DSM Solid Lifter Conversion Kit
Boostin Performance 1/2" L19 4G63 Head Stud Kit
BP Spec MLS Head Gasket

IMG_3779.JPG
IMG_3780.JPG
IMG_3781.JPG
 
Last edited:
OMG LOOK!!! IM SOOOOOOOOOO CLOSE!!!! THANKS boostin performance for the studs!!!! can the motor hold 1000hp? with supporting mods?

bottom end

howard i beam rods
acr race main and rod and thrust bearings
wiseco hd 1400 9.5:1 stock bore
arp main studs/bolts
everyhing you can do machine work wise (pics below) total $2,596 just for the machine work (no o ring)

IMG_3800.JPG
IMG_3801.JPG

IMG_3784.JPG
IMG_3786.JPG
IMG_3787.JPG
IMG_3788.JPG
IMG_3789.JPG
IMG_3790.JPG
IMG_3796.JPG
IMG_3798.JPG
IMG_3799.JPG
 
Last edited:
what a beaut!!

thanks bro-

engine update!!!

front acl case and oil pump put on - brand new
rear main seal put on - brand new seal
cam seals put on - brand new
i just pick up skunk pro series cam gears from my local shop E-SPEC tuning
putting on gears and belt tn along with flex plate and arp crank bolts
i am also starting on the front brakes again, im doing the cts-v swap, i have the mustang rotors, 5mm spacers,
(need to arrive still) centric rings - calipers

IMG_3810.JPG
IMG_3811.JPG
IMG_3812.JPG
IMG_3813.JPG
IMG_3814.JPG
 
Motivation for us all. Nice build man.

yea man MOTIVATION ALL AROUND, I WOULD LIKE TO THANK THE DSM COMMUNITY FOR HELPING ME WITH MY BUILD, ALL THE KNOWLEDGE ABOUT WHAT IM DOING I HAVE FOUND FROM THIS COMMUNITY, AND IF I CANT FIND IT, SOMEONE HERE WILL HELP ME, JUST WANT TO SAY THANKS TO EVERYBODY!!!!!!!

some new parts i just ordered and got

ordered the big bad aeromotive pump today!!!

also just got my arp cam bolts today as well

this is how she sits!!


IMG_3830.JPG
IMG_3831.JPG


pump.jpg
 
that will definitely give you all the fuel you would need thats for sure! :hellyeah:
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top