The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Rix Racing

EGT probe with anti-lag good idea?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tigerinstincts

Proven Member
202
24
Mar 1, 2015
Sacramento, California
Is running an EGT probe off the exhaust manifold a good idea if you want to use dsmlink's anti-lag feature?

Or is this just asking for trouble...
 
It won't hurt the turbine if you don't use it excessively or have it tuned too aggressively. But there's no need for anti lag on a t25, the regular launch control will spool it no problem.
 
i was wondering if i use the anit-lag feature, that over time the probe from the egt may somehow break off because...you know...anit-lag. Anyway I will be installing my 18g pretty soon and im going to use a 8cm turbine housing. Heard its a tad laggy and want to mess with anti-lag eventually
 
Yeah just about anything in a bolt on housing will spool with the regular launch control feature. My old bolt on HX35 could build about 15psi @ 6000 rpm on the regular 2 step, and it definitely spooled slower than an 18g.
 
Hmm I dnt build any boost with launch control set at 5500 with the t25. Blt showed a minor leak at the throttle body. Guess I have different problem I need to check out
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top