DSM's 4 life
10+ Year Contributor
- 649
- 14
- Nov 13, 2011
-
Buffalo,
New_York
My 1g has been on the road about 2 month now I drive it everyday. Today on the way home from work my car wouldent go into gear I had this same issue two weeks back. It will go into gear fine when the car is off and will lurtch forward when you attemp to start it in gear (clutch not dissengaugeing?). I thought my clutch had got too hot and got stuck to the flywheel when it first happend. I put my car in gear started it and mashed the pedal to get it going and power through it. after that it was fine. I have a brand new oem slave and a exedy master cylinder and a new napa clutch. I have adjusted the pedal in the car the rod is all the way in and i can still push the clutch slave in with my hand. My clutch ball has been shimmed with two washers and is closer the the slave side than engine when resting but not hitting bellhousing. I have re bleed the slave and i am getting a lot of travel what i dont get is why its intermitent I can put the car in first gear rev to 6k and car will not lurch then park it after a normal cruse and have it drag to the point I cant get it in gear.