- Thread starter
- #26
LBCportagee
Proven Member
- 40
- 13
- May 18, 2013
-
Long Beach,
California
More cutting
started to tack in
Here's why you need to do this
Should have enough space for the harness hardware between the firewall
Here's my solution for the horn. The eclipse clock spring doesn't fit behind the hubs for mounting aftermarket steering wheels, like the Sparco one I'm using. I'm also using an NRG quick release. Between the Sparco hub and quick release, there are extra metal rings for your electrical connections (ground) so I used one behind the hub as well that I attached to two aluminum brackets I made. Hard to see but theres 4 small springs pushing the metal ring against the hub for constant contact. The screws do not come in contact with the hub.
started to tack in
Here's why you need to do this
Should have enough space for the harness hardware between the firewall
Here's my solution for the horn. The eclipse clock spring doesn't fit behind the hubs for mounting aftermarket steering wheels, like the Sparco one I'm using. I'm also using an NRG quick release. Between the Sparco hub and quick release, there are extra metal rings for your electrical connections (ground) so I used one behind the hub as well that I attached to two aluminum brackets I made. Hard to see but theres 4 small springs pushing the metal ring against the hub for constant contact. The screws do not come in contact with the hub.