The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Fuel Injector Clinic

2G Aeromotive afpr return fitting

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jacolu3

Proven Member
638
130
Jan 31, 2015
Lake Grove, New_York
I purchased an aeromotive afpr with all the lines. They all are 8-an for the feed and return.
My problem is the return nipple is much bigger than the return hose size. It was working for a while but started to leak. So I ordered a 6-an barb to 7mm which does not work because the return on this afpr is 8-an. I can not find a 8-an to 7mm barb anywhere.
I am just using a rubber fuel hose for the return. Anyone have any suggestions?
Thanks
Brian
 
Did you get one of the X1 series regulators? what size is your return hose? if your running a 8AN feed, you should have a 6AN return. Cant you just swap the outlet fitting for this one and run a 6AN return if your not already?
 
Did you get one of the X1 series regulators? what size is your return hose? if your running a 8AN feed, you should have a 6AN return. Cant you just swap the outlet fitting for this one and run a 6AN return if your not already?

All of the inlets are 8AN. For the feed and the return
I'll have to find a link for the one that I bought
 
Not sure of the part number but it's the eBay link and they def all 8-an ports. It came with a barb fitting for the return but it's big. Pretty sure it 3/8
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top