The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

Rough idle..

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Giovanni0423

Proven Member
37
0
Jun 12, 2016
Los angeles, California
Hey ladies and gents,
So I previously bought this 1g. I changed the clutch, pp, flywheel. Subsequently the front axels. Now Im going to the next topic. My idle is hella rough. It's a 1g awd. It looks like the old owner put some time of plastic in where the biss idle screw goes and I can't get ithe in there to try to fix the idle based off that. Any ideas how to get that plastic out..?

ALSO..it's happened once and got me a tad worried. The car was sitting for 3 weeks. Yesterday I went to turn it on and the car would wouldn't crank and not turn on.. I read that it could be a number of problems. Ecu,wires, fuel fikter ect. Today I went to mess with it and it started right up...? Any ideas and pointers before I start messing with it tomorrow.
 
Dig the crap outta the biss hole with a pick, small flat head screwdriver etc.

Sounds like a bad ign. Switch or poor battery connections.

Check all the basics for the electrical.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top