The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

dsmcrzy's Eclipse 20g 420a

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hate to break it to ya but that's not a VRSF intercooler :)
 
The tab, the lack of pre-drilled holes in the bracket and the extended lower tube. The fin pack is probably different as well since we use a DSM specific fin pack.
 
Yea it looks like it's the ssautochrome copy of yours. Urgh... I hate when people lie about parts for sale on here.
 
Making progress slowly but surely. Downpipe goes to the welder this week then it will be off to detective coatings.

All my intercooler pipes, couplers and t bolt clamps are in just need to find time to get them fitted cut and roll some beads on the pipes.

image.jpeg


3FEE9096-CB13-45ED-BD5C-ED0370FC1001_zpsr8xsgfhp.jpg


0C31AC5A-F7D1-48B6-B73F-E382C055598E_zpsohkuo0qt.jpg


460FCBCC-81BF-43F9-998F-1EC5B0619066_zpsfq4dqs9s.jpg
 
Downpipe is going back for final welding. Everything is bolted down. Just need to order some more t bolt clamps. Excited to get her back on the road.

F4B54EDC-D2C8-4F1A-88EF-62800F89C4CF_zpssodqmoej.jpg


E774BB64-C410-4D78-BE75-608F3EBBF4DF_zpszokp07pe.jpg



5BFF121C-35BF-4EA6-B407-FC68EFA7DB4A_zpstqleimpg.jpg
 
Well I got my downpipe back and put the car back together. Fired her up yesterday and she sounded great. Need to fix a couple boost leaks and exhaust leaks though.

7CDE708D-41D6-4283-8CAB-35AAB217FE6B_zpsebcyhisx.jpg
 

Attachments

  • 7CDE708D-41D6-4283-8CAB-35AAB217FE6B_zpsebcyhisx.jpg
    7CDE708D-41D6-4283-8CAB-35AAB217FE6B_zpsebcyhisx.jpg
    155.1 KB · Views: 18
Just read your whole build thread, amazing work! This car has come a LONG way from when you first got it. Very clean engine bay setup, can't wait to see more updates :thumb:
 
Alright so the boost leaks led me to get a new throttle body. I think the shaft seals on my frankenstine jeep throttle body have just had it. Great excuse to pick up an MPx 60mm throttle body.

Since I'm still working on the tune and getting some kinks worked out I have not boosted it past roughly 4 psi. I know, go ahead and laugh LOL. It's like nothing but compared to before it feels like a new car! I'm happy with the results so far. Just being overly cautious I suppose. I just don't want to grenade the engine.

Here's a pic of the final (for now) engine bay.

image.jpeg
 
Nothing major since the last updates. The car is running great. Still haven't upped the boost yet but the car is a ton of fun to drive!

Next up I need to get the electronic boost control solenoid hooked up. Also working on a raspberry pi dash that will replace the stock gauge cluster and run tunerstudio.
 
So these showed up today! :hellyeah:
Huge shout out to @ec17pse for hooking me up with the galant knuckles. I was never too keen on using brackets and cutting up the back of the calipers.

Now I just need to get some new axles, bearings and wheels that will actually clear the Brembos :ohdamn:

That will come with time. Currently the wife and I are house hunting again. Hopefully this time I can get a bigger garage that I can put a lift in :rocks:

image.jpeg
 
Also got my digital dash layed out and it's currently getting 3D printed. Once I get it I will have some clean up to do around the outside of the part to get it to fit with the dash. I just didn't feel confident with the curves I was coming up with to mate with the bezel. Should be here in a week or so.
The front is the side with no extrusions.


image.png
image.png
image.png
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top