What does the cam cap that the cas slides into say?? if it has a matching letter that those would obviously be on the intake side..

Just checked three of my cylinder heads, but all have I or E markings. Typically, left or right on an engine is based on as if you were sitting on the engine facing the timing belt (front) end. I would confirm this with your parts as the first response indicated.

Also, if you put the cams in with the caps tightened down (no rockers...) you should be able to turn the cams with little effort as another verification.

I have one sitting here and yes if you were sitting on the head facing the timing gears then left is your left and right is your right.

L is intake and R is exhaust

Great. But what's the order? # order?

yes. 1 being timing belt side 5 being CAS side

Kapok6 said:

yes. 1 being timing belt side 5 being CAS side

Click to expand...

You answered me or the op? This is a old thread.

You

Plymouth caps; look at all the stamps. See my dilemma....

Here's a few pictures of my cam caps when I did my valve cover.
If you have a good computer screen you should be able to read most of them


The pictures were taken with the engine in the car so timing belt on the right and the transmission on the left

Did you not take a picture before you removed them? And yeah they have a lot of different numbers going on there ,
I can see your cause for concern

I did that's the order in which there were, according to old pics. But just didn't make any sense. I have two other heads and they are clear as day and in order based on common sense.

o0GuitarKid0o said:

Here's a few pictures of my cam caps when I did my valve cover.
If you have a good computer screen you should be able to read most of them


The pictures were taken with the engine in the car so timing belt on the right and the transmission on the left

Did you not take a picture before you removed them? And yeah they have a lot of different numbers going on there ,
I can see your cause for concern

Click to expand...

Mine got jumbled to the dog knocked my table over would this order work on a 96 Gst thanks you

Anyone have a picture of the cam caps for a 96 Gst

^ I ended up going with what allowed for free spinning cams.
As in i changed the order if it was to tight, to make it loose.

Theyre marked and the fsm tells you which way they go. Am I missing something here?