605jdm
Proven Member
- 169
- 14
- Feb 7, 2016
-
siouxfalls,
South_Dakota
Is there a way to hook up a switch to turn 2 step or ALS on or off on DSMlink v3?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I want to be able to turn ALS off without using my computer every time.Yea you can hook something tricky with a clutch switch so when you push it down an inch or so. You want rolling anti-lag?
Then do that same thing but hook it to a toggle switch and mount it.I want to be able to turn ALS off without using my computer every time.
Do you hook the switch up to the clutch wire?Then do that same thing but hook it to a toggle switch and mount it.
Yes. At least I think that would work. I'd have to go look over the setting and how it all works with the clutch switch again. But I'm pretty sure you could rig something up like that. Been a while since I played with it but I think the clutch switch has to be active for it to work. If thats the case then there you go and you can put the button anywhere you like just remember anything that you have the clutch switch doing is now controlled by that button.Do you hook the switch up to the clutch wire?