The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Rix Racing

2G Prothane bushing question

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tigerinstincts

Proven Member
202
24
Mar 1, 2015
Sacramento, California
Want to know if these are supposed to come preassembled like shown in the pic. If so, are these to be pressed in? Just assumed all bushings in prothanes total bushing kit would be split design and ddnt need a press. Anyway the part number on these from prothane are C-10042. They are for both the lower control arms in the rear connecting to the rear subframe of the car. Thanks for any input
 
Thanks that's all I needed to know and it's fine. Getting 4 bushings pressed in won't be too expensive
 
Alternatively, a vise could work. If you already have one laying around, you might want to consider this. The upper control arm bushings are fairly large and I was able to vise them in: post #18 This post is pic heavy so you might need to scroll down to find post #18...
 
Yeah I tried a vice at first and broke the vice LOL just got them back from being pressed in. Looks like I have 2 of the same lower control arms tho...great. Someone pls tell me I'm wrong
 

Attachments

  • IMG_20160505_170258.jpg
    IMG_20160505_170258.jpg
    391.1 KB · Views: 89
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top