The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

exhaust manifold

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

akdov823

Proven Member
255
30
Sep 20, 2014
feeding hills, Massachusetts
i was having a ton of issues with the alternator and radiator fan clearing the waste gate. so long story short i decided to cut up my recirculating 02 housing and mount the waste gate on the manifold. i dont own a tig or know how to tig so i only tacked it into place, i'll bring it to get finish welded tomorrow. just looking for opinions.
 

Attachments

  • dsm manifold.jpg
    dsm manifold.jpg
    105.1 KB · Views: 105
Honestly I don't know. It came with a 6 bolt block I bought. I assumed it was on the cheaper side but after cutting into it I realized it's quality stainless so I doubt it's to cheap.
 
Having the external that far upstream on 1 runner isn't ideal, might not have great boost control. Closer to the collector or in the collector would give you better control, but there are space constraints. It'll prolly work for the time being.

It looks like an eBay stainless one to me
 
I really wanted to work off of the collector but fitting it in was beyond my fabrication skills. The plan is to simply break the motor in and work out the bugs this year and switch to a larger turbo over the winter
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top