The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

2G 1G rods in 2G block and 2G pistons

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JJdreamer

Probationary Member
8
0
Nov 9, 2015
Sibiu, Europe
Hallo. I have a 2G Eclipse (4G63 N/A, Euro model, 146HP) and i got crankwalk. I want to refubrish my crank to R1 and use 1G conecting rods. Woud those rods fit on my 7bolt crank and my 2G pistons ? or whould a complete 6bolt crank from a 1G(include the flywheel) fit on the 7bolt block?
I would do this because I don't find second hand 7bolt rods in my country.
Thanks a lot.
 
OK. Thanks very much! I came to the decision to swap the engine with another 7bolt. So what I have to look at when I'm going to test one? sorry for the off-topic and for my bad english (I'm from Romania)
 
Because the wiring and the adaptations of the timing side and the homologation of the engine.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top