The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Rix Racing

2G Coolant feed and return.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fabian95tsi

15+ Year Contributor
66
2
Nov 9, 2007
dodge city, Kansas
Ok guys so my new motor came with a water pipe that has the original coolant lines cut and welded up because the owner before me did not water cool the turbo and had a foward facing ofh. Now my hta fp green that's going onto my new motor needs to be water cooled.. can I use the circled lines to water cool my turbo?
 

Attachments

  • 2016-02-08 12.32.52.jpg
    2016-02-08 12.32.52.jpg
    196.6 KB · Views: 118
It looks like he cut the return line off the water pipe. I can see where he welded it right where it meets the t-stat housing. That is where the return line is supposed to be. The fitting off the block is the coolant feed to the turbo. Refer to the picture I attached. Sorry it's been a while since I've worked on a 7 bolt.
 

Attachments

  • image.jpg
    image.jpg
    78.6 KB · Views: 76
Thanks for everyones replys. I will use the original fitting off the block and the fitting just to the right of the water neck as a feed and return for my turbo thank you.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top